CMPG-907 - Doorbell Infiniton - Free user manual and instructions
Find the device manual for free CMPG-907 Infiniton in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Doorbell |
| Brand | Infiniton |
| Model | CMPG-907 |
| Receiver Power Supply | Plug-in (100-240 V AC) |
| Transmitter Power Supply | 12V battery (A23 type) |
| Operating Frequency | 433.92 MHz |
| Wireless Range | Up to 300 m (open area) |
| Number of Melodies | 36 |
| Volume Settings | Adjustable (5 levels) |
| LED Flash Indicator | Yes |
| Waterproof Rating (Transmitter) | IP44 |
| Installation Type | Wall-mounted, no wiring required |
| Receiver Dimensions | 85 x 55 x 25 mm |
| Transmitter Dimensions | 65 x 25 x 65 mm |
| Receiver Weight | 80 g |
| Transmitter Weight | 50 g |
| Material | ABS plastic |
| Operating Temperature | -10°C to 50°C |
| Low Battery Warning | Yes |
| Number of Transmitters Supported | Up to 3 |
| Clean and Maintenance | Wipe with a dry cloth, do not immerse |
| Safety | For indoor use on receiver; keep away from moisture |
Frequently Asked Questions - CMPG-907 Infiniton
How do I install the Infiniton CMPG-907 doorbell?
The receiver plugs into a standard mains socket. The transmitter can be mounted on the wall using the included screws or double-sided tape. Ensure the front of the transmitter points toward the door. Press the button to test.
How many transmitters can be paired with the receiver?
The CMPG-907 supports up to 3 transmitters. To add or reset a transmitter, follow the pairing instructions in the manual, typically by holding the volume or reset button on the receiver for a few seconds.
What type of battery does the transmitter use?
The transmitter uses a 12V A23 battery, available at most electronics stores. Open the battery compartment on the back, insert the battery with correct polarity, and close it securely.
Why is the receiver not ringing?
Check that the transmitter battery is not depleted and that the transmitter is within range (up to 300 m in open area). Ensure the receiver is plugged in and the volume is not set to mute. Also, press the transmitter button again – if the LED flashes but no sound, the receiver may need to be re-paired.
Can the doorbell work in rainy weather?
Yes, the transmitter has an IP44 waterproof rating, meaning it is splash-proof from all directions. However, the receiver must be kept indoors and away from moisture.
How do I adjust the volume and melody?
Use the buttons on the receiver to cycle through 36 melodies and 5 volume levels. Press the melody button to select a new chime, and the volume button to increase or decrease the loudness.
Is there a low battery indicator?
Yes, when the transmitter battery is low, the LED light will appear dim or the receiver may show a low-battery icon. Replace the battery promptly.
What is the wireless range and how can I improve it?
The range is up to 300 m in an open field. To improve range, avoid installation near large metal objects, keep the antennas vertical, and ensure the receiver is not obstructed by thick walls.
Can I use the doorbell even if the receiver is unplugged?
No, the receiver requires mains power to operate. However, you can install multiple receivers or use a rechargeable battery backup if available, but the standard model works only when plugged in.
How do I clean and maintain the doorbell?
Wipe the housings with a soft, dry cloth. Do not use water or cleaning agents, as they can damage the electronics. Clean the transmitter button regularly to prevent sticking.
User questions about CMPG-907 Infiniton
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Doorbell in PDF format for free! Find your manual CMPG-907 - Infiniton and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CMPG-907 by Infiniton.