RE047 - Router Multilaser - Free user manual and instructions
Find the device manual for free RE047 Multilaser in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Router |
| Brand | Multilaser |
| Model | RE047 |
| Dimensions (approx.) | 200 x 150 x 30 mm |
| Weight (approx.) | 300 g |
| Power Supply | DC 9V, 0.6A |
| Wireless Standards | IEEE 802.11 b/g/n |
| Frequency Band | 2.4 GHz |
| Maximum Wireless Speed | 300 Mbps |
| Ethernet Ports | 4 x LAN 10/100 Mbps, 1 x WAN 10/100 Mbps |
| Antenna | 2 external antennas |
| Encryption | WPA2, WPA, WEP |
| Firewall | SPI, NAT, DoS protection |
| Operation Modes | Router, Access Point, Repeater |
| Management | Web-based GUI |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 70°C |
| Humidity | 10% to 90% non-condensing |
| Maintenance | Clean with dry cloth, avoid liquids |
| Safety | Keep away from water, do not disassemble |
| Spare Parts & Repairability | Contact Multilaser support for replacement parts |
| Package Contents | Router, power adapter, Ethernet cable, manual |
Frequently Asked Questions - RE047 Multilaser
How do I reset the Multilaser RE047 router to factory defaults?
Press and hold the Reset button on the rear panel for about 10 seconds until the power LED starts flashing. The router will reboot and restore factory settings.
What is the default IP address to access the router settings?
The default IP address is 192.168.1.1. Enter this in your browser's address bar to open the configuration page.
How can I change the Wi-Fi password?
Log into the router's web interface, go to Wireless Settings > Security, and enter your new password in the 'Pre-Shared Key' field. Save the settings.
What should I do if I forget the router's admin password?
Perform a factory reset by holding the Reset button for 10 seconds. The default admin password is usually admin or blank.
How do I configure the router as a repeater?
Access the web interface, navigate to Operation Mode, select Repeater, then scan for your main Wi-Fi network and enter its password.
Why is my internet connection slow?
Check for interference from other devices, ensure the router is placed centrally, update firmware, and verify that you are using the 2.4 GHz band with minimal congestion.
Can I use the router with a VPN?
Yes, the router supports PPTP and L2TP VPN pass-through. Configure VPN settings under Advanced > VPN.
How do I update the router's firmware?
Download the latest firmware from Multilaser's website. In the web interface, go to System Tools > Firmware Upgrade, select the file, and follow the prompts.
What is the range of the RE047?
Indoor range is typically about 50-70 meters depending on obstacles. Outdoor range can extend up to 100 meters in open space.
How do I enable the guest network?
Go to Wireless Settings > Guest Network, enable it, set a SSID and password, and choose isolation options for security.
User questions about RE047 Multilaser
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual RE047 - Multilaser and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. RE047 by Multilaser.
USER MANUAL RE047 Multilaser
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Multilaser
Model : RE047
Category : Router