RE051 - Wi-Fi repeater Multilaser - Free user manual and instructions
Find the device manual for free RE051 Multilaser in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wi-Fi Repeater |
| Brand | Multilaser |
| Model | RE051 |
| Wireless Standard | IEEE 802.11 b/g/n |
| Frequency Band | 2.4 GHz |
| Maximum Wireless Speed | 300 Mbps |
| Ethernet Ports | 1 x 10/100 Mbps LAN |
| WPS Button | Yes |
| Power Supply | 100-240V AC via included adapter |
| Power Consumption | 5W (typical) |
| Dimensions (HxWxD) | 80 x 55 x 30 mm |
| Weight | 80 g |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Humidity | 10% to 85% non-condensing |
| LED Indicators | Power, LAN, WLAN, Signal Strength |
| Antenna Type | Built-in PCB antenna |
| Security | WPA/WPA2-PSK encryption |
| Setup | Web interface or WPS push button |
| Maintenance | Clean with dry cloth; avoid liquids |
| Safety | Do not disassemble; keep away from water |
| Spare Parts | Power adapter available from manufacturer |
| Repairability | Limited; contact authorized service |
| Certifications | ANATEL, CE, FCC |
Frequently Asked Questions - RE051 Multilaser
How do I reset the Multilaser RE051 repeater?
Press and hold the WPS/Reset button on the device for about 10 seconds until all LEDs blink. The repeater will restart with factory settings.
What is the default IP address to access the web interface?
The default IP is usually 192.168.10.1 or 192.168.1.254. Check the label on the device or manual for exact details.
Can I connect the repeater via an Ethernet cable?
Yes, the RE051 has one LAN port that can be used to connect a wired device or to configure the repeater via Ethernet.
How do I extend my Wi-Fi network using WPS?
Press the WPS button on your main router, then within 2 minutes press the WPS button on the RE051. The connection will be established automatically.
What should I do if the repeater is not connecting to the router?
Ensure the repeater is within range of the router. Try resetting both devices. Verify that the router's WPS is enabled or manually configure via web interface.
Does the RE051 support dual-band?
No, it is a single-band 2.4 GHz repeater. It works with 802.11 b/g/n networks.
How can I improve the signal strength of the repeater?
Place the repeater midway between the router and the dead zone, avoid obstacles like walls and metal objects. Adjust the antennas if external.
Is it safe to leave the repeater on 24/7?
Yes, the device is designed for continuous operation. Ensure proper ventilation and do not cover it.
Can I use the repeater as a wireless access point?
Yes, by connecting it via Ethernet to the router and changing the mode in the web interface to Access Point.
What is the maximum number of devices that can connect?
Typically up to 20-30 devices, but performance may vary depending on bandwidth usage and distance.
User questions about RE051 Multilaser
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Wi-Fi repeater in PDF format for free! Find your manual RE051 - Multilaser and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. RE051 by Multilaser.
USER MANUAL RE051 Multilaser
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Multilaser
Model : RE051
Category : Wi-Fi repeater