Black TREVOCE 15 EQ - Subwoofer OSD Audio - Free user manual and instructions
Find the device manual for free Black TREVOCE 15 EQ OSD Audio in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Powered Subwoofer |
| Brand | OSD Audio |
| Model | Black TREVOCE 15 EQ |
| Driver Size | 15 inches |
| Amplifier Power (RMS) | 400 Watts |
| Frequency Response | 20 Hz - 200 Hz |
| Enclosure Type | Sealed |
| Inputs | Line-level RCA, LFE, Speaker-level |
| Outputs | Line-level pass-through |
| Controls | Volume, Crossover, Phase, EQ presets |
| Dimensions (H x W x D) | 18.5 x 15 x 15 inches |
| Weight | 35 lbs |
| Power Supply | 110-240V AC, 50/60 Hz |
| Finishes | Black matte |
| Warranty | 1 Year Limited |
| Features | Built-in EQ, auto standby, low-pass filter |
| Placement | Floor standing |
| Recommended Room Size | Up to 500 sq ft |
| Included Accessories | Power cord, RCA cable, manual |
Frequently Asked Questions - Black TREVOCE 15 EQ OSD Audio
How do I connect the subwoofer to my AV receiver?
Use an RCA cable to connect the subwoofer's LFE input to your receiver's subwoofer pre-out. Alternatively, use speaker-level inputs if your receiver lacks a dedicated sub out.
What is the optimal placement for the subwoofer?
Place the subwoofer in a corner or along a wall for maximum bass output. Avoid placing it directly against furniture. Experiment with the crawl test to find the best spot.
How do I adjust the EQ settings?
Use the EQ presets on the rear panel to match your room acoustics. You can also use an external equalizer or the receiver's room correction system.
What should I set the crossover frequency to?
Set the crossover to 80 Hz as a starting point for most home theater systems. Adjust based on your speakers' capabilities and personal preference.
Why is my subwoofer not turning on?
Check the power cable connection and ensure the power switch is on. If using auto standby, the subwoofer may need a signal to wake up. Test with a known working outlet.
How do I clean and maintain the subwoofer?
Wipe the cabinet with a soft, dry cloth. Do not use any liquids or solvents. Ensure the vents are clear of dust for proper cooling.
Can I use this subwoofer outdoors?
This subwoofer is designed for indoor use only. Exposure to moisture or extreme temperatures may damage the electronics.
What is the phase control for?
The phase control (0° or 180°) helps align the subwoofer's output with your main speakers for seamless integration. Switch between settings to see which gives fuller bass at your listening position.
How do I reset the subwoofer to factory defaults?
Press and hold the EQ button for 10 seconds while the subwoofer is on. The power LED will flash, indicating a reset.
Where can I find replacement parts like a fuse?
Contact OSD Audio support or visit their website for genuine replacement parts. The fuse is located near the power input and is a standard T2AL 250V type.
User questions about Black TREVOCE 15 EQ OSD Audio
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Subwoofer in PDF format for free! Find your manual Black TREVOCE 15 EQ - OSD Audio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Black TREVOCE 15 EQ by OSD Audio.
USER MANUAL Black TREVOCE 15 EQ OSD Audio
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : OSD Audio
Model : Black TREVOCE 15 EQ
Category : Subwoofer