VE 1034N-F - Measurement PCE - Free user manual and instructions
Find the device manual for free VE 1034N-F PCE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Vibration Meter |
| Model | VE 1034N-F |
| Brand | PCE Instruments |
| Measurement Parameters | Acceleration, Velocity, Displacement |
| Measurement Range (Acceleration) | 0.1 to 199.9 m/s² |
| Measurement Range (Velocity) | 0.1 to 199.9 mm/s |
| Measurement Range (Displacement) | 0.001 to 1.999 mm |
| Frequency Range | 10 Hz to 1 kHz |
| Accuracy | ±5% of reading ±2 digits |
| Display | LCD with backlight |
| Power Supply | 9V battery (6F22 or equivalent) |
| Battery Life | Approximately 50 hours of continuous use |
| Dimensions | 185 x 68 x 30 mm |
| Weight | Approximately 200 g (including battery) |
| Housing Material | ABS plastic |
| Main Functions | Data hold, max/min recording, auto power-off, low battery indicator |
| Accessories Included | Vibration sensor (piezoelectric), magnetic base, carrying case, manual |
| Calibration | Factory calibrated; recommended annual recalibration |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20°C to 60°C |
| Humidity | ≤80% RH non-condensing |
| Safety Standards | EN 61010-1, CE compliant |
| Maintenance | Clean with dry cloth; avoid solvents; store in dry place |
| Spare Parts Availability | Battery, sensor, magnetic base available from PCE |
| Warranty | 2 years |
Frequently Asked Questions - VE 1034N-F PCE
How do I turn on the PCE VE 1034N-F?
Press the ON/OFF button located on the top panel. The device will power on and display the last measurement mode.
What does the 'HOLD' button do?
The HOLD button freezes the current reading on the display. Press it again to release and resume live measurement.
How do I change between acceleration, velocity, and displacement?
Repeatedly press the MODE button to cycle through the three measurement parameters. The current unit will be shown on the screen.
What type of battery does the VE 1034N-F use?
It uses a standard 9V battery (6F22 or equivalent). To replace, slide off the battery compartment cover at the back.
How do I attach the vibration sensor?
Connect the sensor cable to the INPUT jack on the top of the meter. For magnetic mounting, attach the sensor to the magnetic base and place on the test surface.
Can I use the VE 1034N-F on rotating machinery?
Yes, it is suitable for measuring vibration on rotating machinery such as motors, pumps, and fans. Ensure the sensor is firmly attached.
What does 'MAX/MIN' mode record?
In MAX/MIN mode, the device stores the highest and lowest measured values. Press the button to cycle through MAX, MIN, and current readings.
How do I enable or disable auto power-off?
The auto power-off feature is enabled by default and turns off the meter after 5 minutes of inactivity. To disable, press and hold the ON/OFF button for 3 seconds until the symbol disappears.
What is the recommended calibration interval?
For best accuracy, it is recommended to have the meter calibrated annually by PCE Instruments or an accredited laboratory.
Where can I find the full user manual?
The full manual in PDF format is available for free download on notice-facile.com or the PCE Instruments official website.
User questions about VE 1034N-F PCE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measurement in PDF format for free! Find your manual VE 1034N-F - PCE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VE 1034N-F by PCE.
USER MANUAL VE 1034N-F PCE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : PCE
Model : VE 1034N-F
Category : Measurement