SpinBase Max - Loudspeaker Andover - Free user manual and instructions
Find the device manual for free SpinBase Max Andover in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Powered Bookshelf Speaker |
| Dimensions (W x D x H) | 11.2 x 6.1 x 6.7 inches |
| Weight | 5.3 lbs |
| Total Power Output | 60W (2 x 30W) |
| Frequency Response | 60 Hz – 20 kHz |
| Driver Configuration | 3.5" full-range drivers |
| Bluetooth Version | 5.0 with aptX support |
| Inputs | Bluetooth, 3.5mm AUX, USB Audio |
| Outputs | Subwoofer out (3.5mm) |
| Impedance | 4 ohms |
| Signal-to-Noise Ratio | >80 dB |
| Power Supply | AC 100-240V, 50/60Hz, external adapter |
| Power Consumption | 25W typical, 0.5W standby |
| Housing Material | MDF with real wood veneer |
| Color Options | Black, Walnut |
| Warranty | 2 years limited |
| Included Accessories | Power adapter, 3.5mm AUX cable, quick start guide |
| Operating Temperature | 5°C to 35°C |
| Disposal | Recycle according to local regulations |
Frequently Asked Questions - SpinBase Max Andover
How do I pair the SpinBase Max with my phone via Bluetooth?
Turn on the speaker and put it in pairing mode by pressing the Bluetooth button until the LED flashes. On your phone, select 'SpinBase Max' from the list of available devices. If prompted, enter PIN 0000.
Can I use the SpinBase Max as a standalone speaker without a turntable?
Yes, the SpinBase Max is a powered speaker that can play audio from any Bluetooth, auxiliary, or USB source, even without a turntable connected.
What is the best way to clean the wood veneer surface?
Use a soft, dry microfiber cloth. Avoid harsh chemicals or abrasive cleaners. For stubborn dust, lightly dampen the cloth with water and wipe gently.
How do I connect a subwoofer to the SpinBase Max?
Connect an active subwoofer to the Sub Out port on the back of the speaker using a standard 3.5mm to RCA cable. The speaker will automatically detect the connection.
What should I do if the speaker does not power on?
Check that the power adapter is firmly connected to the speaker and a working wall outlet. Try a different outlet or cable. If the issue persists, contact Andover support.
Is the SpinBase Max compatible with Amazon Alexa or Google Assistant?
The speaker does not have built-in voice assistants, but you can use it as a Bluetooth speaker with any smart device that has voice assistant capabilities.
What is the warranty period for this product?
Andover offers a 2-year limited warranty covering defects in materials and workmanship. Register your product on the Andover website for warranty service.
Can I leave the speaker in standby mode?
Yes, the speaker will enter standby mode after 15 minutes of inactivity to save power. Press any button to wake it up. Standby power consumption is less than 0.5W.
How do I reset the speaker to factory settings?
With the speaker on, press and hold the Volume + and Bluetooth buttons simultaneously for 5 seconds until the LED flashes red. This will clear all paired devices and reset settings.
What audio codecs does the Bluetooth support?
The speaker supports SBC, AAC, and aptX codecs for high-quality wireless streaming. aptX is recommended for near-CD quality audio.
User questions about SpinBase Max Andover
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual SpinBase Max - Andover and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SpinBase Max by Andover.
USER MANUAL SpinBase Max Andover
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Andover
Model : SpinBase Max
Category : Loudspeaker