SpinDeck 2 - Turntable Andover - Free user manual and instructions
Find the device manual for free SpinDeck 2 Andover in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Andover |
| Model | SpinDeck 2 |
| Product Type | Turntable (Vinyl Record Player) |
| Drive System | Belt Drive |
| Speeds | 33 1/3 RPM, 45 RPM |
| Platter Material | Aluminum Die-Cast |
| Tonearm | Balanced S-Shape with Hydraulic Damping |
| Cartridge Type | Moving Magnet (MM) |
| Outputs | RCA Stereo (Phono Level), Built-in Preamp (Line Level) |
| Dimensions (W x D x H) | 420 x 350 x 120 mm |
| Weight | 4.5 kg |
| Power Supply | 12V DC, 500mA (External Adapter) |
| Power Consumption | 6W |
| Included Accessories | Dust Cover, RCA Cable, Power Adapter, 45 RPM Adapter |
| Material | MDF Chassis with Wood Veneer Finish |
| Maintenance | Clean stylus with soft brush; wipe platter with dry cloth; avoid moisture. |
| Safety Warnings | Keep away from heat sources; do not overload power outlet; use only supplied adapter. |
| Spare Parts Available | Stylus, Belt, Cartridge (contact support) |
| Warranty | 1 Year Limited |
Frequently Asked Questions - SpinDeck 2 Andover
How do I connect the SpinDeck 2 to my speakers?
The turntable has a built-in preamp. Use the RCA cables to connect to the AUX input on your receiver or powered speakers. If using a phono input, set the preamp switch to Phono.
What speed should I use for my records?
Most LPs play at 33 1/3 RPM. 7-inch singles typically play at 45 RPM. Use the speed selector on the turntable.
How often should I replace the stylus?
The stylus should be replaced after approximately 500 hours of play or if you notice distortion. Use a compatible Moving Magnet stylus.
Can I connect Bluetooth headphones?
No, the SpinDeck 2 does not have Bluetooth. Use wired headphones via the headphone jack on your amplifier.
Why is my turntable not spinning?
Check the power connection and ensure the belt is properly attached. If the belt is loose, replace it. Also verify that the platter is not obstructed.
How do I clean the vinyl records?
Use a carbon fiber brush to remove dust before play. For deeper cleaning, use a record cleaning solution and a microfiber cloth. Avoid water on labels.
Does the turntable have auto-stop?
Yes, the SpinDeck 2 features auto-stop at the end of the record to prevent stylus wear.
What is the weight of the turntable?
The SpinDeck 2 weighs approximately 4.5 kg (9.9 lbs). Ensure your furniture can support this weight.
Can I use a different cartridge?
Yes, the tonearm is compatible with standard half-inch mount cartridges. Consult the manual for tracking force adjustment.
How to set up the turntable for the first time?
Place the turntable on a level surface. Remove the platter and install the belt. Attach the counterweight and set tracking force. Connect to power and audio system.
User questions about SpinDeck 2 Andover
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Turntable in PDF format for free! Find your manual SpinDeck 2 - Andover and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SpinDeck 2 by Andover.
USER MANUAL SpinDeck 2 Andover
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Andover
Model : SpinDeck 2
Category : Turntable