Mini 2 - 3D Printer LulzBot - Free user manual and instructions
Find the device manual for free Mini 2 LulzBot in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 3D Printer |
| Manufacturer | LulzBot |
| Model | Mini 2 |
| Print Technology | Fused Filament Fabrication (FFF) |
| Build Volume | 160 x 160 x 180 mm |
| Filament Diameter | 3.0 mm |
| Nozzle Diameter | 0.5 mm |
| Layer Resolution | 0.05 - 0.35 mm |
| Print Speed | 20 - 200 mm/s |
| Heated Bed | Yes, up to 120°C |
| Max Extruder Temperature | 290°C |
| Printing Materials | PLA, ABS, PETG, Nylon, Polycarbonate, etc. |
| Connectivity | USB, SD Card |
| Display | Full-color LCD with rotary knob |
| Auto Bed Leveling | Yes, 5-point probing |
| Frame | Open aluminum frame |
| Build Plate | Borosilicate glass with PEI surface |
| Dimensions (W x D x H) | 380 x 360 x 470 mm |
| Weight | 6.8 kg (15 lbs) |
| Power Supply | 100-240V AC, 50/60Hz, 120W |
| Software | Cura LulzBot Edition, Repetier-Host, OctoPrint compatible |
| Included Accessories | 1 kg filament sample, tools, SD card |
| Warranty | 1 year standard |
| Safety Features | Thermal runaway protection, overcurrent protection |
| Maintenance | Regular cleaning of extruder and bed, lubrication of linear bearings |
Frequently Asked Questions - Mini 2 LulzBot
What type of filament does the LulzBot Mini 2 use?
The LulzBot Mini 2 uses 3.0 mm diameter filament. It is compatible with many materials such as PLA, ABS, PETG, Nylon, and Polycarbonate. Always use high-quality filament to ensure optimal printing results.
How do I level the bed on the Mini 2?
The LulzBot Mini 2 features automatic bed leveling using a 5-point probing system. To level: go to the 'Bed Leveling' menu on the LCD, the printer will probe five points and adjust the bed height automatically. For manual adjustment, you can turn the thumbscrews under the bed if needed.
How can I change the nozzle?
To change the nozzle: heat the extruder to 240°C, then use the provided wrench to carefully unscrew the old nozzle. Clean the heat block threads, then screw in the new nozzle (0.5 mm standard) and tighten gently. Allow to cool before use.
Can I print with ABS on the Mini 2?
Yes, the Mini 2 can print ABS. Ensure the bed is heated to 110-120°C and the enclosure (if using) is closed to prevent warping. Use a well-ventilated area or an enclosure with proper ventilation because ABS fumes can be harmful.
How do I connect the Mini 2 to my computer?
Connect the printer via USB cable to your computer. Use slicing software like Cura LulzBot Edition or Repetier-Host to send prints. For wireless printing, you can use an OctoPrint setup with a Raspberry Pi.
What software should I use with the LulzBot Mini 2?
Recommended software is Cura LulzBot Edition which comes pre-configured for the Mini 2. You can also use Repetier-Host or OctoPrint. For advanced users, Simplify3D is compatible.
How do I clean a clogged nozzle?
Heat the nozzle to printing temperature, then use the cleaning filament (like eSun cleaning filament) or perform a cold pull: heat to 240°C, insert filament, let cool to 100°C, then pull out. Repeat until clean.
How can I update the firmware?
Firmware updates are available on the LulzBot website. Download the latest firmware file, place it on an SD card, insert into the printer, and navigate to 'Update Firmware' in the LCD menu. The printer will restart after update.
Where can I find spare parts for the Mini 2?
Official spare parts are available from LulzBot's online store or through authorized resellers. Common parts include nozzles, heater cartridges, thermistors, belts, and linear bearings. Always verify compatibility with the Mini 2.
How noisy is the LulzBot Mini 2?
The Mini 2 operates at approximately 45-55 dB during printing, which is comparable to a quiet conversation. Stepper motor noise is present but can be reduced by using dampeners or upgrading to silent stepper drivers.
User questions about Mini 2 LulzBot
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your 3D Printer in PDF format for free! Find your manual Mini 2 - LulzBot and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Mini 2 by LulzBot.
USER MANUAL Mini 2 LulzBot
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : LulzBot
Model : Mini 2
Category : 3D Printer