WGCL111F - Dimmer HAGER - Free user manual and instructions
Find the device manual for free WGCL111F HAGER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Dimmer Switch |
| Brand | Hager |
| Model | WGCL111F |
| Dimensions (H x W x D) | 45 mm x 45 mm x 30 mm |
| Weight | 50 g |
| Power Supply | 230 V AC, 50 Hz |
| Rated Load (Incandescent/Halogen) | 40 W - 400 W |
| Rated Load (LED) | 10 W - 200 W |
| Control Type | Rotary push-button |
| Mounting Type | Flush mount (wall box) |
| Operating Temperature | -10°C to +40°C |
| Protection Class | IP20 |
| Safety Features | Overload protection, short-circuit protection, soft start |
| Compatible Lamp Types | Incandescent, halogen, dimmable LED, dimmable CFL |
| Minimum Load | 10 W (LED), 40 W (incandescent) |
| Maximum Wire Size | 2.5 mm² |
| Color | White |
| Certifications | CE, RoHS |
| Maintenance | Wipe with a dry, soft cloth; do not use solvents |
| Spare Parts Availability | Not available separately; replace unit if faulty |
Frequently Asked Questions - WGCL111F HAGER
What types of lamps are compatible with the Hager WGCL111F dimmer?
The WGCL111F is compatible with incandescent, halogen, dimmable LED, and dimmable CFL lamps. Ensure the load is within the specified range: 40-400W for incandescent/halogen, 10-200W for LED/CFL.
Can I use this dimmer with LED lights?
Yes, but only with dimmable LED bulbs. The total LED load must be between 10W and 200W. Non-dimmable LED bulbs may flicker or cause damage.
How do I install the Hager WGCL111F dimmer?
Turn off the mains power. Connect the live (L) and switched live (L') wires to the dimmer terminals. Ensure the load is within the rated limits. Flush mount into a standard wall box. After installation, restore power and test.
What is the minimum load required for the dimmer to function correctly?
The minimum load is 40W for incandescent/halogen lamps and 10W for dimmable LED/CFL lamps. Operating below the minimum may cause flickering or unstable dimming.
Why does my LED light flicker when using this dimmer?
Flickering can occur if the bulb is not dimmable, the total load is too low (<10W), or the dimmer is not compatible with the specific LED driver. Try replacing the bulb with a recommended dimmable LED.
Is the Hager WGCL111F dimmer suitable for use with ceiling fans?
No, this dimmer is designed only for lighting loads. Using it with inductive loads like fans can damage the dimmer and cause safety hazards.
Does the dimmer have overload protection?
Yes, it features overload protection and short-circuit protection. If the load exceeds the maximum rating, the dimmer may shut off or reduce power.
Can I use multiple dimmers on the same lighting circuit?
It is generally not recommended to use multiple dimmers in parallel on the same circuit unless they are designed for master-slave operation. The WGCL111F is a single-pole dimmer; consult an electrician for multi-location setups.
What is the maximum number of LED bulbs I can connect?
The number depends on the wattage of each bulb. For example, if each LED bulb is 10W, you can connect up to 20 bulbs (total 200W). Ensure the total load does not exceed 200W for LEDs.
How can I clean the dimmer?
Clean the surface with a dry, soft cloth. Do not use water, solvents, or abrasive cleaners. Always power off before cleaning.
User questions about WGCL111F HAGER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dimmer in PDF format for free! Find your manual WGCL111F - HAGER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WGCL111F by HAGER.
USER MANUAL WGCL111F HAGER
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HAGER
Model : WGCL111F
Category : Dimmer