Eliminator Lighting

Amber Fog 700 LED - Effects machine Eliminator Lighting - Free user manual and instructions

Find the device manual for free Amber Fog 700 LED Eliminator Lighting in PDF.

📄 3 pages English EN ⬇ Download 💬 AI Question ❓ 10 questions ⚙️ Specs
Notice Eliminator Lighting Amber Fog 700 LED - page 1
1 / 3
Pick your language and provide your email: we'll send you a specifically translated version.
Product TypeEffects Machine (Fog Machine)
ModelAmber Fog 700 LED
BrandEliminator Lighting
DimensionsApprox. 12.5 x 8.5 x 6.5 inches (318 x 216 x 165 mm)
WeightApprox. 8.5 lbs (3.9 kg)
Power SupplyAC 110-120V, 60Hz (or 220-240V, 50Hz depending on region)
Power Consumption700W (heater) + LED power
Heating TimeApprox. 3-4 minutes
Fog OutputUp to 7,000 cubic feet per minute
Fluid Tank Capacity0.5 liters (16.9 oz)
Control MethodsWired remote control, DMX512 (optional)
DMX Channels2 channels (fog and LED)
LED EffectsRGB color mixing with built-in programs
Fuse Rating10A (replaceable)
Safety FeaturesThermal cut-off, automatic shut-off when fluid low
Housing MaterialHeavy-duty steel and ABS plastic
Mounting OptionsFloor standing or hanging bracket (included)
Operating Temperature32°F to 95°F (0°C to 35°C)
CleaningUse distilled water for cleaning; avoid vinegar or harsh chemicals
Spare Parts AvailableHeater assembly, pump, fuse, remote control, fluid tank
RepairabilityModular design; user-replaceable components with basic tools
Warranty1-year limited warranty
ComplianceETL, CE, RoHS

Frequently Asked Questions - Amber Fog 700 LED Eliminator Lighting

What type of fog fluid should I use with the Amber Fog 700 LED?
Use only water-based fog fluid recommended for fog machines. Avoid using oil-based fluids as they can damage the unit.
How long does it take for the machine to heat up?
The heater typically takes about 3-4 minutes to reach operating temperature, indicated by the ready light.
Can I control the fog output without a remote?
The machine includes a wired remote control for basic on/off and continuous fog. DMX control is also available for more advanced control.
How do I clean the fog machine?
Run a mixture of distilled water and a small amount of white vinegar through the system periodically. Refer to the manual for specific steps.
What does the LED function do?
The RGB LED can produce various colors and effects, controllable via DMX or built-in programs, adding visual effects to the fog.
Is the Amber Fog 700 LED safe to use indoors?
Yes, but ensure adequate ventilation. The fog is water-based and non-irritating to most people, but avoid direct inhalation.
How do I replace the fuse?
Unplug the unit, locate the fuse holder near the power cord, open it, and replace the 10A fuse with the same rating.
Can I use the machine without fluid?
No, operating without fluid will damage the pump and heater. Always ensure the tank has sufficient fluid before use.
What should I do if the fog output is weak?
Check fluid level, ensure the heater is fully warmed up, and clean the nozzle. If problem persists, check the filter or pump.
How do I dispose of the fog fluid?
Water-based fog fluid is non-toxic and can be disposed of down the drain with running water. Check local regulations.

User questions about Amber Fog 700 LED Eliminator Lighting

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Effects machine in PDF format for free! Find your manual Amber Fog 700 LED - Eliminator Lighting and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Amber Fog 700 LED by Eliminator Lighting.

USER MANUAL Amber Fog 700 LED Eliminator Lighting

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Eliminator Lighting

Model : Amber Fog 700 LED

Category : Effects machine