EN1244 - Smoke detector Inovonics - Free user manual and instructions
Find the device manual for free EN1244 Inovonics in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Smoke Detector |
| Brand | Inovonics |
| Model | EN1244 |
| Detection Technology | Photoelectric |
| Power Source | 9V Battery (alkaline recommended) |
| Battery Life | Approximately 1 year |
| Alarm Sound Level | 85 dB at 10 feet |
| Dimensions (Diameter x Height) | 4.5 in x 1.5 in (114 mm x 38 mm) |
| Weight | 150 g (5.3 oz) |
| Operating Temperature Range | 40°F to 100°F (4°C to 38°C) |
| Humidity Range | 5% to 95% relative humidity (non-condensing) |
| Compliance | UL 217 listed |
| Warranty | 10 years limited |
| Installation | Ceiling or wall mount (included hardware) |
| Test/Silence Button | Yes |
| Low Battery Chirp | Yes (approximately every 30 seconds) |
| End of Life Warning | Yes (after 10 years) |
| Cleaning | Vacuum dust from vents annually |
| Replacement Parts | Battery only (user-replaceable) |
| Interconnectivity | Wireless interconnect with compatible Inovonics devices (optional) |
Frequently Asked Questions - EN1244 Inovonics
How do I install the Inovonics EN1244 smoke detector?
Mount the detector on the ceiling or wall using the included screws and anchors. Remove the battery tab to activate the battery. Test the detector by pressing the test button until the alarm sounds.
How often should I test the smoke detector?
Test the detector at least once a month by pressing and holding the test button until the alarm sounds. This ensures the battery and electronics are working.
What type of battery does the EN1244 use and how long does it last?
The detector uses a standard 9V alkaline battery. Battery life is approximately one year. Replace the battery immediately when the low battery chirp starts.
What should I do if the smoke detector goes off falsely from cooking?
Ventilate the area by opening windows or using a fan. If the alarm continues, press the silence button to temporarily mute the alarm. The detector will reset automatically after a few minutes.
How do I clean the smoke detector?
Clean the detector annually by gently vacuuming the vents with a soft brush attachment to remove dust and debris. Do not use water or cleaners.
Can I interconnect multiple EN1244 detectors?
Yes, the EN1244 supports wireless interconnection with other compatible Inovonics detectors. When one alarm triggers, all interconnected alarms will sound. Refer to the manual for setup.
What is the lifespan of the EN1244 smoke detector?
The detector has a 10-year limited lifespan from the date of manufacture. After 10 years, replace the entire unit even if it appears to work.
Why does my smoke detector chirp even after replacing the battery?
If chirping continues, ensure the battery is fresh and properly connected. Also check for dust inside the unit. If the problem persists, the detector may be at end of life and requires replacement.
What is the alarm sound like and how loud is it?
The alarm produces a loud 85 dB pulsating tone at 10 feet. It is designed to wake sleeping individuals.
Where should I NOT install the smoke detector?
Avoid installing near kitchens (to prevent false alarms), bathrooms (high humidity), windows or ducts (airflow), and areas with temperatures outside 40-100°F. Also keep at least 3 feet from ceiling fans.
User questions about EN1244 Inovonics
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Smoke detector in PDF format for free! Find your manual EN1244 - Inovonics and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EN1244 by Inovonics.
USER MANUAL EN1244 Inovonics
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Inovonics
Model : EN1244
Category : Smoke detector