EN1266 - Motion detector Inovonics - Free user manual and instructions
Find the device manual for free EN1266 Inovonics in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Inovonics |
| Model | EN1266 |
| Product Type | Wireless Motion Detector |
| Technology | Passive Infrared (PIR) |
| Frequency | 900 MHz (ISM band) |
| Detection Range | Up to 12 meters (40 ft) at 90° |
| Pet Immunity | Up to 20 kg (45 lbs) |
| Power Source | 1× CR123A 3V Lithium Battery |
| Battery Life | Approximately 3-5 years |
| Dimensions (H × W × D) | 102 × 64 × 48 mm (4.0 × 2.5 × 1.9 in) |
| Weight (with battery) | 113 g (4.0 oz) |
| Operating Temperature | -10°C to 50°C (14°F to 122°F) |
| Relay Output | Form A (NC/NO), 26 VDC, 1 A max |
| Installation | Wall mount, included bracket |
| Supervision | Periodic check-in signal |
| Tamper Protection | Tamper switch (cover removal) |
| Compliance | FCC Part 15, RoHS |
| Low Battery Indication | Transmits low battery signal |
| Warranty | 1 year limited |
| Included Accessories | Mounting bracket, screws, battery |
| Maintenance & Cleaning | Wipe with dry cloth; avoid liquids |
| Reparability | No user-serviceable parts; replace battery only |
| Safety | Test weekly; comply with local codes |
Frequently Asked Questions - EN1266 Inovonics
How do I install the EN1266 motion detector?
Mount the detector on a wall at 2-3 meters height using the included bracket. Ensure clear view of the area. Insert the CR123A battery, and the device will pair automatically with the receiver.
What is the detection range of the EN1266?
The detection range is up to 12 meters (40 ft) with a 90° coverage angle. For optimal performance, avoid obstructions and direct sunlight.
How long does the battery last?
The CR123A lithium battery lasts approximately 3-5 years under normal use. A low battery signal will be transmitted to the receiver.
Is the EN1266 pet immune?
Yes, it is pet immune up to 20 kg (45 lbs). Detection patterns ignore small animals to reduce false alarms.
What frequency does the EN1266 use?
It operates on the 900 MHz ISM band, compatible with Inovonics receivers. It is FCC compliant.
How do I clean the motion detector?
Wipe the case with a dry, soft cloth. Do not use water, solvents, or abrasive cleaners. Avoid spraying liquids directly.
What does the tamper switch do?
The tamper switch triggers an alarm if the cover is removed, protecting against sabotage.
Can I use the EN1266 outdoors?
No, it is designed for indoor use only. Operating temperature range is -10°C to 50°C (14°F to 122°F).
How do I test the detector?
Walk across the detection area and verify the receiver registers motion. Perform weekly tests to ensure proper function.
What should I do if the detector stops working?
Check battery voltage and replace if low. Ensure no obstructions. If still not working, contact Inovonics support or consult the manual.
User questions about EN1266 Inovonics
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Motion detector in PDF format for free! Find your manual EN1266 - Inovonics and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EN1266 by Inovonics.
USER MANUAL EN1266 Inovonics
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Inovonics
Model : EN1266
Category : Motion detector