MOFO-124X - Subwoofer Power Acoustik - Free user manual and instructions
Find the device manual for free MOFO-124X Power Acoustik in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Subwoofer |
| Brand | Power Acoustik |
| Model | MOFO-124X |
| Size | 12 inches |
| Impedance | Dual 4 ohms |
| RMS Power Handling | 1000 Watts |
| Peak Power Handling | 2000 Watts |
| Sensitivity | 89 dB |
| Frequency Response | 25 Hz - 200 Hz |
| Mounting Depth | 6.5 inches |
| Mounting Hole Diameter | 11 inches |
| Voice Coil | High-temperature dual 4-ohm |
| Cone Material | Polypropylene with rubber surround |
| Basket Material | Stamped steel |
| Recommended Enclosure | Sealed or ported (1.5-2.5 cu ft) |
| Weight | 25 lbs (approx.) |
| Power Supply Requirement | Car battery 12V, compatible amplifier recommended |
| Maintenance | Clean with a dry, soft cloth; avoid moisture |
| Safety | Do not exceed rated power; ensure proper enclosure |
| Spare Parts | Not user-replaceable; contact dealer for service |
| Repairability | Non-serviceable by user; seek professional repair |
Frequently Asked Questions - MOFO-124X Power Acoustik
What is the recommended amplifier power for the MOFO-124X?
The subwoofer has an RMS rating of 1000W. It is recommended to pair it with an amplifier that delivers between 800W and 1200W RMS at 2 ohms (since dual 4-ohm coils can be wired to 2 ohms).
Can I use this subwoofer in a sealed enclosure?
Yes, the MOFO-124X works well in sealed enclosures (1.5-2.0 cu ft) for tight, accurate bass. A ported enclosure (2.0-2.5 cu ft) will produce louder, deeper bass.
How do I wire the dual 4-ohm voice coils?
You can wire them in parallel for a 2-ohm load or in series for an 8-ohm load. Parallel wiring is common to maximize amplifier output.
What is the mounting depth required?
The mounting depth is approximately 6.5 inches. Ensure your enclosure has at least that depth plus clearance for the magnet.
Does this subwoofer come with a warranty?
Power Acoustik typically offers a 1-year warranty against manufacturing defects. Check with your retailer for specific warranty terms.
What type of music is this subwoofer best for?
It performs well with all genres, especially bass-heavy music like hip-hop, EDM, and rock, thanks to its high power handling and low-frequency extension.
Can I use the MOFO-124X in a home theater system?
While designed for car audio, it can be used in home theaters with a suitable 12V power supply and amplifier, but it is not optimized for home use.
What is the sensitivity of this subwoofer?
The sensitivity is 89 dB (1W/1m), which means it requires moderate power to achieve high output.
How do I clean the subwoofer cone?
Gently dust the cone with a soft brush or cloth. Do not use water or cleaning agents, as they may damage the cone material.
Is the subwoofer compatible with a 1-ohm stable amplifier?
The dual 4-ohm coils wired in parallel yield a 2-ohm load. To achieve 1 ohm, you would need dual 2-ohm coils or multiple subwoofers. This model is not designed for 1-ohm operation.
User questions about MOFO-124X Power Acoustik
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Subwoofer in PDF format for free! Find your manual MOFO-124X - Power Acoustik and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MOFO-124X by Power Acoustik.
USER MANUAL MOFO-124X Power Acoustik
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Power Acoustik
Model : MOFO-124X
Category : Subwoofer