DS-PDC15-EG2-WB - Motion detector Hikvision - Free user manual and instructions
Find the device manual for free DS-PDC15-EG2-WB Hikvision in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Motion Detector |
| Brand | Hikvision |
| Model | DS-PDC15-EG2-WB |
| Detection Technology | Passive Infrared (PIR) |
| Wireless Protocol | Zigbee |
| Power Supply | 2x AA batteries (DC 3V) |
| Battery Life | Up to 3 years (typical usage) |
| Detection Range | Up to 15 meters (49 ft) |
| Detection Angle | 90 degrees |
| Pet Immunity | Up to 15 kg (33 lb) |
| Operating Temperature | -10°C to 55°C (14°F to 131°F) |
| Operating Humidity | Up to 95% non-condensing |
| Dimensions (W x H x D) | 110 x 60 x 45 mm (4.3 x 2.4 x 1.8 in) |
| Weight (with batteries) | Approx. 100 g (3.5 oz) |
| Mounting | Wall or corner, indoor use |
| Tamper Protection | Anti-tamper switch |
| Alarm Indication | Red LED flash |
| Compatibility | Hikvision alarm systems |
| Certification | CE, FCC |
| Included Accessories | Mounting bracket, screws, anchors, manual |
Frequently Asked Questions - DS-PDC15-EG2-WB Hikvision
How do I pair the DS-PDC15-EG2-WB with my Hikvision alarm system?
Put the alarm panel into pairing mode. Insert batteries in the detector, then press the tamper switch three times within 3 seconds. The LED will blink to confirm pairing.
What type of batteries does the detector use?
It uses two AA 1.5V alkaline or lithium batteries. Do not mix old and new batteries.
How long do the batteries last?
Battery life is typically up to 3 years under normal usage, depending on number of triggers and temperature.
What is the detection range and angle?
The detector has a 15-meter range and a 90-degree angle. For optimal performance, mount at 2 meters height.
Is it pet immune?
Yes, it provides immunity for pets up to 15 kg (33 lb) to reduce false alarms.
Can I use this outdoors?
The DS-PDC15-EG2-WB is designed for indoor use only. Exposure to moisture or extreme temperatures may damage it.
What does the LED indicator mean?
A solid red LED during detection indicates triggered alarm. A flashing LED during pairing indicates mode. Refer to manual for full code.
How do I clean the motion detector?
Use a soft dry cloth to wipe the casing. Avoid cleaning agents or water to prevent damage to the sensor.
How do I perform a factory reset?
Remove batteries, wait 10 seconds, then reinsert. Press and hold the tamper switch for 10 seconds until the LED blinks twice. Release to reset.
What should I do if the detector keeps triggering false alarms?
Check for nearby heat sources (vents, heaters) or moving objects (curtains, pets). Adjust placement or lower sensitivity via alarm system if supported.
User questions about DS-PDC15-EG2-WB Hikvision
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Motion detector in PDF format for free! Find your manual DS-PDC15-EG2-WB - Hikvision and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DS-PDC15-EG2-WB by Hikvision.
USER MANUAL DS-PDC15-EG2-WB Hikvision
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Hikvision
Model : DS-PDC15-EG2-WB
Category : Motion detector