Springs - Processor AudioThing - Free user manual and instructions
Find the device manual for free Springs AudioThing in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Spring Reverb Processor |
| Dimensions (W x D x H) | 44 x 220 x 180 mm (1.7 x 8.7 x 7.1 in) |
| Weight | 1.2 kg (2.6 lbs) |
| Power Supply | 9V DC center-negative, 500 mA (power supply included) |
| Input Connections | 1/4" TS unbalanced (mono) |
| Output Connections | 1/4" TS unbalanced (mono) |
| Controls | Mix, Decay, Tone, Dwell, Level; Bypass footswitch |
| Reverb Type | Analog spring reverb with three springs |
| Bypass | True bypass via footswitch |
| Construction | Sturdy metal chassis with rubber feet |
| Features | Pre/Post EQ, Dwell control for drive, adjustable tone shaping |
| Frequency Response | 20 Hz – 20 kHz |
| Signal-to-Noise Ratio | >90 dB |
| Dimensions (boxed) | 44 x 220 x 180 mm |
| Included Accessories | Power supply, user manual |
| Cleaning Instructions | Wipe with a dry, soft cloth; avoid solvents and abrasives |
| Safety Warnings | Use only the supplied power adapter; do not expose to moisture |
| Spare Parts Availability | Contact AudioThing support for replacement power supply or springs |
| Repair Service | Contact AudioThing or authorized service centers |
| General Information | Designed for studio and stage use; compatible with guitar, bass, and line-level signals |
Frequently Asked Questions - Springs AudioThing
How do I power the Springs?
Connect the included 9V DC center-negative power supply to the DC jack. Ensure the voltage and polarity match. Do not use a different adapter.
What cables do I need?
Use standard 1/4" TS instrument cables for both input and output. The Springs accepts mono signals only.
How do I adjust the reverb decay?
Turn the Decay knob clockwise to increase reverb length, counterclockwise for shorter decay. The Dwell control pre-drives the springs for additional character.
Can I use the Springs with a stereo signal?
The Springs is a mono processor. For stereo use, you need two units or use a mono send/return loop.
What is the 'Dwell' control for?
The Dwell knob controls the input drive to the spring tank. Higher settings increase harmonic distortion and splashiness, typical of vintage spring reverbs.
How do I clean the Springs?
Unplug the unit and wipe the exterior with a dry, soft cloth. Do not use liquids, solvents, or abrasive cleaners. Avoid contact with the spring tank.
Why is there no sound when bypassed?
Check that the power supply is connected and the LED is lit. If the bypass is true bypass, the circuit should pass signal even without power. Verify your cables.
Can I repair the springs if they break?
Spring tanks are user-replaceable. Contact AudioThing support for a replacement or refer to the manual for disassembly instructions. Do not open the unit yourself if under warranty.
What type of spring reverbs does it emulate?
The Springs models classic 1960s spring reverbs found in guitar amps and outboard units. It features a three-spring tank with characteristic drip and bounce.
How do I achieve a 'drip' effect?
Set the Dwell and Tone controls to high settings, and play percussively. The springs will resonate and produce the classic 'drip' sound associated with surf music.
User questions about Springs AudioThing
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Processor in PDF format for free! Find your manual Springs - AudioThing and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Springs by AudioThing.
USER MANUAL Springs AudioThing
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : AudioThing
Model : Springs
Category : Processor