EvenLED DMX Thief - Lighting MARTIN - Free user manual and instructions
Find the device manual for free EvenLED DMX Thief MARTIN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED DMX Lighting Fixture |
| Model | EvenLED DMX Thief |
| Brand | Martin |
| Dimensions (H x W x D) | 10.5 x 26.5 x 26.5 cm (4.1 x 10.4 x 10.4 in) |
| Weight | 3.2 kg (7.1 lbs) |
| Power Supply | 100–240 V AC, 50/60 Hz, 1.5 A |
| Power Consumption | 150 W |
| Light Source | RGBW LED array |
| DMX Control | Yes, 4/5/8/12 channels selectable |
| Operating Modes | DMX, Master/Slave, Auto, Sound-Active |
| Beam Angle | 25° (optional 40°) |
| Cooling | Convection, silent operation |
| Housing Material | Aluminum die-cast |
| IP Rating | IP20 (indoor use only) |
| Safety Features | Overheat protection, power fuse |
| Maintenance | Periodic cleaning of lens with dry cloth |
| Repair & Spare Parts | LED module, power supply, main board replaceable by qualified technician |
| Included Accessories | Power cord, mounting bracket, user manual |
Frequently Asked Questions - EvenLED DMX Thief MARTIN
How do I connect the EvenLED DMX Thief to a DMX controller?
Use a standard 3-pin XLR cable. Connect the DMX output of your controller to the DMX input of the fixture. If using multiple fixtures, daisy-chain them by connecting the DMX output of one fixture to the input of the next. Set the DMX address using the control panel.
Can I use the fixture without a DMX controller?
Yes. The fixture has standalone modes: Auto (built-in programs), Sound-Active (responds to music), and Master/Slave (synchronize multiple units). Select the mode via the menu.
What is the maximum number of fixtures I can daisy-chain?
Up to 32 fixtures on a single DMX line, depending on cable length and quality. Use a DMX terminator at the end of the chain to prevent signal reflection.
How do I set the DMX address?
Press the Menu button, navigate to 'DMX Address', use the Up/Down buttons to set the desired address (001–512), and press Enter to confirm.
What does the 'Thief' feature do?
The 'Thief' function allows the fixture to 'steal' DMX data from the line without interrupting the signal. It is used for monitoring or overriding specific channels. Refer to the manual for detailed setup.
How do I clean the fixture?
Unplug the fixture. Use a soft, dry cloth to wipe the housing and lens. Avoid using liquids or abrasive cleaners. For stubborn dirt, slightly dampen the cloth with water.
What safety precautions should I take?
Always mount securely, ensure proper ventilation, do not cover the fixture, use cables with appropriate ratings, and disconnect power before cleaning or maintenance. Do not stare directly at the light source.
Can I replace the LED module?
The LED module is replaceable, but only by a qualified technician. Spare parts are available from authorized Martin dealers. Attempting replacement yourself may void the warranty.
What are the power requirements?
The fixture operates on 100–240 V AC, 50/60 Hz. It has a standard IEC power input. Use only the supplied power cord or one with equivalent ratings.
Where can I download the user manual?
The manual is available for download on the official Martin website, or from notice-facile.com. A PDF version can be obtained by providing your email on the product page.
User questions about EvenLED DMX Thief MARTIN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lighting in PDF format for free! Find your manual EvenLED DMX Thief - MARTIN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EvenLED DMX Thief by MARTIN.
USER MANUAL EvenLED DMX Thief MARTIN
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MARTIN
Model : EvenLED DMX Thief
Category : Lighting