APC

NetBotz NBES0305 - Network Security APC - Free user manual and instructions

Find the device manual for free NetBotz NBES0305 APC in PDF.

📄 1 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice APC NetBotz NBES0305 - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Network Security Appliance
Brand APC
Model NetBotz NBES0305
Form Factor 1U Rackmount
Dimensions (H x W x D) 1.75 x 17.3 x 14.5 in (44 x 440 x 368 mm)
Weight 15.4 lb (7 kg)
Power Supply 100-240 VAC, 50/60 Hz, 1.5A
Power Consumption 150W max
Network Interface 2 x RJ-45 10/100/1000 Mbps
USB Ports 2 x USB 2.0
Serial Port 1 x RS-232
Sensor Inputs 4 x Digital Sensor Ports (temperature, humidity, etc.)
Relay Outputs 2 x Dry Contact Relay
Video Input 4 x BNC Composite Video
Audio 1 x Microphone Input, 1 x Speaker Output
Storage Internal 500GB HDD
Operating Temperature 32°F to 104°F (0°C to 40°C)
Humidity Range 5% to 95% non-condensing
Certifications FCC, CE, UL
Included Accessories Rack Mount Kit, Power Cord, Quick Start Guide
Main Functions Environmental Monitoring, Video Recording, Access Control Integration
Maintenance Keep vents clean; update firmware via web interface
Safety Do not block airflow; use proper grounding
Repairability Hot-swappable fan, replaceable HDD

Frequently Asked Questions - NetBotz NBES0305 APC

How do I set up the NetBotz NBES0305 for the first time?
Connect the device to your network via the Ethernet port, power it on, and then use the APC NetBotz configuration software or web interface to assign an IP address and configure basic settings.
What sensors are compatible with the NBES0305?
It supports APC's digital sensors for temperature, humidity, door contacts, and water leaks. Use the sensor ports on the front panel.
Can I record video from analog cameras?
Yes, the NBES0305 has four BNC composite video inputs for recording and monitoring analog cameras up to D1 resolution.
How do I access the web interface?
Open a browser and enter the device's IP address. The default credentials are often 'admin'/'admin' or found in the quick start guide.
What is the maximum storage capacity?
The internal 500GB HDD can be upgraded to a larger 2.5-inch SATA drive. The device supports up to 2TB.
How do I set up email alerts for environmental events?
In the web interface, go to Alerts > Email Settings, enter your SMTP server details, and configure thresholds for temperature or humidity.
Can I integrate this with a building management system?
Yes, it supports SNMP, Modbus, and BACnet protocols for integration with BMS or DCIM software.
What should I do if the device is overheating?
Check that the fan is running and vents are not blocked. Ensure ambient temperature is within 32-104°F. If the fan fails, replace it hot-swappable.
How do I factory reset the NBES0305?
Press and hold the Reset button on the front panel for 5 seconds until the status LED blinks. This resets to default IP and password.
Is there a warranty and how do I get support?
APC offers a 2-year limited warranty. Contact APC support at their website or call the hotline. Keep the serial number ready.

User questions about NetBotz NBES0305 APC

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Network Security in PDF format for free! Find your manual NetBotz NBES0305 - APC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. NetBotz NBES0305 by APC.

USER MANUAL NetBotz NBES0305 APC

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : APC

Model : NetBotz NBES0305

Category : Network Security