FortiAP 423E - Access Point Fortinet - Free user manual and instructions
Find the device manual for free FortiAP 423E Fortinet in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Indoor Dual-Band Access Point |
| Model | FortiAP 423E |
| Wireless Standards | 802.11a/b/g/n/ac Wave 2 |
| Frequency Bands | 2.4 GHz and 5 GHz |
| MIMO Configuration | 2x2:2 |
| Maximum Data Rate (2.4 GHz) | 300 Mbps |
| Maximum Data Rate (5 GHz) | 867 Mbps |
| Ethernet Interface | 1x Gigabit Ethernet (PoE PD) |
| Power Supply | PoE (802.3af) or 12V DC adapter (optional) |
| Power Consumption | 12.95 Watts (PoE) |
| Dimensions (W x D x H) | 150 x 150 x 35 mm (5.9 x 5.9 x 1.38 in) |
| Weight | 300 g (0.66 lbs) |
| Mounting | Ceiling or wall (bracket included) |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Antennas | Internal dual-band omni-directional |
| Management | FortiGate, FortiCloud, or standalone |
| Security Features | WPA2/WPA3, 802.1X, captive portal, MAC filtering |
| Maintenance | Clean with dry cloth; no user-serviceable parts |
| Spare Parts & Repairability | Contact Fortinet authorized service center |
| Compliance | FCC, CE, IC, RoHS, Wi-Fi Alliance |
Frequently Asked Questions - FortiAP 423E Fortinet
How do I reset the FortiAP 423E to factory defaults?
Press and hold the reset button (located near the Ethernet port) for approximately 10 seconds using a paperclip. The device will reboot and restore factory settings.
What is the default IP address and login for the FortiAP 423E?
The default IP is 192.168.1.2, with username 'admin' and password 'admin' (if not changed). It attempts to get an IP via DHCP first.
Can I power the FortiAP 423E with a PoE injector?
Yes, it supports 802.3af PoE. Use a PoE injector or a PoE-enabled switch. Alternatively, a 12V DC adapter (sold separately) can be used.
How do I mount the FortiAP 423E on a ceiling?
Use the included mounting bracket. Attach the bracket to the ceiling with screws (not included), then slide the access point onto the bracket until it clicks. Ensure proper ventilation.
What is the maximum number of clients supported?
The FortiAP 423E can support up to 256 associated clients, but actual performance depends on network conditions and applications.
How do I configure the FortiAP 423E in standalone mode?
Connect to the AP's SSID (default 'FortiAP-XXXX') and access the web interface at 192.168.1.2. Log in and configure settings under 'Standalone' mode. Alternatively, use the FortiGate controller for centralized management.
Does the FortiAP 423E support WPA3?
Yes, it supports WPA3-Personal and WPA3-Enterprise with SAE (Simultaneous Authentication of Equals). Ensure the firmware is updated to the latest version.
What should I do if the LED is not turning on?
Check the PoE connection and cable. Verify the switch/injector provides power. If using DC adapter, ensure it's plugged in. If still off, the unit may be faulty; contact support.
How do I update the firmware on the FortiAP 423E?
Via FortiGate: the AP updates automatically when managed. Standalone: download firmware from Fortinet's support site, then upload in the 'Administration' page under 'Firmware Upgrade'.
Can I use the FortiAP 423E outdoors?
The FortiAP 423E is designed for indoor use only. Exposure to rain, dust, or extreme temperatures may damage it. For outdoor use, consider FortiAP outdoor models.
User questions about FortiAP 423E Fortinet
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Access Point in PDF format for free! Find your manual FortiAP 423E - Fortinet and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FortiAP 423E by Fortinet.
USER MANUAL FortiAP 423E Fortinet
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Fortinet
Model : FortiAP 423E
Category : Access Point