Forcesilence Aero 450 - Ceiling fan CECOTEC - Free user manual and instructions
Find the device manual for free Forcesilence Aero 450 CECOTEC in PDF.
| Product type | Ceiling fan |
| Brand | Cecotec |
| Model | Forcesilence Aero 450 |
| Blade diameter | 132 cm |
| Height | 30 cm |
| Weight | 5,5 kg |
| Power supply | 220-240 V ~ 50 Hz |
| Maximum power | 50 W |
| Speeds | 3 (low, medium, high) |
| Reverse function | Yes (summer/winter) |
| Remote control | Yes, included |
| Motor | Silent DC motor |
| Materials | ABS blades, metal bracket |
| Installation | Ceiling mount, fixing included |
| Noise level | 25 dB (at minimum speed) |
| Airflow rate | 4500 m³/h (max) |
| Warranty | 2 years |
| Maintenance and cleaning | Dust with a soft cloth |
| Safety | Thermal protection, automatic shut-off |
| Spare parts and repairability | Available on the Cecotec website |
| Insulation class | Class II |
Frequently Asked Questions - Forcesilence Aero 450 CECOTEC
User questions about Forcesilence Aero 450 CECOTEC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Ceiling fan in PDF format for free! Find your manual Forcesilence Aero 450 - CECOTEC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Forcesilence Aero 450 by CECOTEC.
USER MANUAL Forcesilence Aero 450 CECOTEC
Safety instructions 6
-
Parts and components 31
-
Before use 31
-
Product assembly 31
-
Operation 33
-
Cleaning and maintenance 33
-
Troubleshooting 34
-
Technical specifications 35
-
Disposal of old electrical appliances 35
-
Technical support and warranty 35
SOMMAIRE
Read these instructions thoroughly before using the appliance. Keep this instruction manual for future reference or new users. Make sure that the mains voltage matches the voltage stated on the rating label of the appliance and that the wall outlet is grounded.
Check the power cord regularly for visible damage. If the cord is damaged, it must be replaced by the official Technical Support Service of Cecotec in order to avoid any type of danger.
Do not operate the product if its cord, plug or body show visible damage, do not operate properly or have been dropped.
Do not use the appliance in confined spaces with explosive or flammable vapours.
Do not try to repair the product by yourself. Contact the official Technical Support Service of Cecotec.
To ensure the correct operating of the device, cleaning and maintenance tasks must be carried out according to this instruction manual. Always turn off and unplug the appliance before cleaning.
Cleaning and maintenance tasks must not be carried out by children.
Make sure the fan is not placed close to curtains or other objects that could tangle.
Install the fan only in the ceiling.
The minimum distance between the fan blades and the floor must be 2.3 m. The minimum carrying capacity of the outlet box from which the fan is hung must be 100 kg.
Make sure you install all-poles disconnection switch with a minimum distance of 3 mm between poles in the supply wiring to the ceiling fan.
Switch off the power before connecting or repairing the fan.
The electrical wiring must be in accordance with the local regulations.
The fan must be properly grounded to avoid the risk of electric shocks.
Never mount the fan in a moist or wet room.
Be careful when working near the rotating blades.
This appliance must be installed in accordance with the national electrical installation regulations.
The appliance is not intended to be used by children under the age of 8. It can be used by children over the age of 8, as long as they are given continuous supervision.
This appliance can be used by children aged 8 and above, and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge, as long as they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. Close supervision is necessary when the appliance is being used by or near children.
Keep this appliance and its power cord out of reach of children under the age of 8.
Warning:
In order to ensure your children's' safety, please keep all packaging (plastic bags, boxes, polystyrene etc.) away from their reach.
Shut off the main electric switch during installation or maintenance. It is recommended to switch off the plug of the automatic switch before the fan.
This product is designed for domestic use only, do not use it for commercial or industrial purposes.
INSTRUCTIONS DE SÉCURITÉ
- Mounting bracket
- Hanging ball
- Downrod
- Screws I
- Canopy
- Screws II
- Clevis pin
- Mounting plate
- Motor
- Screw and washer
- Blades
- Blade assembly disc
- Screws III
- Light base plate
- Lamp bracket
- Lamp holder
- Glass shade
2. BEFORE USE
Take the product out of the box.
Carefully open the ceiling fan's box, take all the components out and place them on a cloth or soft surface to avoid damage. Do not lay the motor's box on its sides, the housing could be damaged.
Make sure all parts and components are included and in good conditions.
If any sign of visible damage is observed, contact immediately with our official Technical Support Service.
3. PRODUCT ASSEMBLY
Warning: To avoid electric shocks, turn the household power supply off before starting the ceiling fan installation.
Assembly according to the type of ceiling:
Low ceilings
Normal ceilings
Sloped ceilings (might require a longer downrod, not supplied by Cecotec)
Fig. 2
ENGLISH
Remove the 4 screws that fix the canopy and the mounting bracket and separate these 2 pieces.
Remove the pin and the screw that fix the hanging ball and the downrod and separate both pieces.
Pass the fan body's cables through the canopy's hole.
Pass the same cables through the hanging ball.
Then, pass the cables again through the downrod. Fix the downrod to the mounting plate using the clevis pin and 2 screws provided. Make sure both pieces are securely fixed.
Insert the pin through the pin holes located on the upper end of the downrod. Once it is inserted, slide the hanging ball towards the top in order to place it in the same downrod's upper end and fix it with one of the screws provided.
Make sure the pin fits in the slots located inside the hanging ball before screwing it.
Mark the centre of the assembly bracket and use both self-tapping screws provided with its corresponding washers and lock washers to fix the mounting bracket to a wooden ceiling.
Note: Self-tapping screws are only suitable for wooden ceilings. In case of installing the ceiling fan to concrete ceilings or joists, use a drill for making the holes and stoppers or expansion screws (not included).
Once the mounting bracket is screwed to the ceiling, connect the mains power supply to the fan's terminal block. Make sure the cables are connected properly paying attention to the colour codes and that there is an earthed cable (green and yellow).
Lift the fan previously mounted to the mounting bracket and insert the hanging ball through the mounting bracket's hole.
Connect the cables that come out from the downrod to those from the mounting bracket paying attention to the colour codes.
Slide the canopy upwards so that all the connections are stored inside it and screw it to the mounting bracket using the 4 screws (2 to each side) removed at the beginning of the installation process.
Remove the screws located on the motor's lower part through the lamp bracket's hole.
Note: The reversible blades have 2 different high-quality finishes.
By inverting the blades, the device produces a decorative effect and adapts to different room designs.
Screw the blade brackets to the motor through the hole in the lamp bracket paying attention to the warning sticker located on one of the blade brackets.
Screw the blades to the blade supports using screws, washers and nuts provided. As blades are reversible, choose the side you desire to be visible and screw them in such way that the nuts are located on the blade's top part.
Tighten the bulb to the lamp holder (not included).
Fit the glass shade into the unit's lower part introducing the lamp bracket's tabs inside the glass shade and ensure it stays securely fixed.
Attach the chain. To do so, fix the long chains with the corresponding end parts of the fan chains by introducing the long chain end into the connecting piece.
Make sure that the chains are safely fixed by pulling on them carefully from the connecting piece.
Fig. 3. - fig. 12.
4. OPERATION
Pull from the chain to turn the fan on and off.
When it is turned off (OFF position), pull from the switch chain until the fan turns on. To turn it off, pull from the chain again.
When the fan is off:
Pull 1 time for high speed.
Pull 2 times for medium speed.
Pull 3 times for low speed.
Pull 4 times: OFF.
The direction switch on the fan's body controls air flow.
Winter function: If it is cold, turn the switch up for blades to move hot air stuck close to the ceiling around. (A)
Summer function: If it is hot, turn the switch down for blades to create a refreshing breeze. (B) Fig. 13.
Warning: Before using the direction switch, turn the fan off and make sure
the device has stopped moving to avoid damage to the motor. Turn the blade-rotation direction by turning the switch up or down while the fan is off.
5. CLEANING AND MAINTENANCE
Cleaning
Clean with a soft, dry cloth. Do not use chemical or harsh abrasive cleaning agents. Do not allow condensation to come in contact with the electrical components.
Maintenance
Replacing the light bulb
Turn the device off (preferably, turn it off at the power circuit breaker) and wait until it cools
ENGLISH
down.
Remove the bulb by holding it firmly and turn it anti-clockwise. Be careful: light bulbs can get very hot during their use.
Take a new bulb and put it carefully into its holder. Screw it clockwise.
Turn the power supply on again and switch the lamp on.
Important: This fan uses 1 E14 bulb, max. 60 W (not included)
6. TROUBLESHOOTING
If the fan does not turn on:
Check the fuses or circuit breakers at the electric panel.
Check the fan cables.
Warning: Make sure the main supply is off.
Make sure that the direction switch is firmly in its position. The fan will not work id the switch is in the middle position.
If the fan does not work, please contact the Technical Support Service of Cecotec. Do not try to repair the internal electric connections.
If the fan makes a lot of noise:
Check that all screws on the motor housing are properly fixed (do not over-tighten them).
Check that the screws that fix the fans' blades support to the motor are enough tightened.
Allow the fan to run for 24 hours. Most of the noises produced by the fan will disappear after this time.
Ensure that all blades are firmly screwed to the blade support.
Check that all blade supports are firmly fixed to the motor.
Make sure that mounting bracket is firmly fixed to the ceiling.
If the blades continue to oscillate, it may cease by changing 2 adjacent blades (side to side), as weight is distributed, and the device operates more smoothly.
If the light does not work:
Check if the bulb is defective.
Make sure that the electric connections are correct.
If the problem remains, contact the official Technical Support Service of Cecotec.
7. TECHNICAL SPECIFICATIONS
Model: EnergySilence 450
Product reference: 05940
Power: 50 W
Voltage and frequency: 230 V \~ 50 Hz
Made in China | Designed in Spain
8. DISPOSAL OF OLD ELECTRICAL APPLIANCES
The European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE), specifies that old household electrical appliances must not be disposed of with the normal unsorted municipal waste. Old appliances must be collected separately, in order to optimise the recovery and recycling of the materials they contain and reduce the impact on human health and the environment.
The crossed out “wheeled bin” symbol on the product reminds you of your obligation to dispose of the appliance correctly.
Consumers must contact their local authorities or retailer for information concerning the correct disposal of old appliances and/or their batteries.
9. TECHNICAL SUPPORT AND WARRANTY
This product is under warranty for 2 years from the date of purchase, as long as the proof of purchase is submitted, the product is in perfect physical condition, and it has been given proper use, as explained in this instruction manual.
The warranty will not cover the following situations:
The product has been used for purposes other than those intended for it, misused, beaten, exposed to moisture, immersed in liquid or corrosive substances, as well as any other fault attributable to the customer.
The product has been disassembled, modified, or repaired by persons, not authorised by the official Technical Support Service of Cecotec.
Faults deriving from the normal wear and tear of its parts, due to use.
The warranty service covers every manufacturing defects of your appliance for 2 years, based on current legislation, except consumable parts. In the event of misuse, the warranty will not apply.
If at any moment you detect any problem with your product or have any doubt, do not hesitate to contact Cecotec Technical Support Service at +34 963 210 728.
FRANÇAIS
1. PIÈCES ET COMPOSANTS
Img. 1.
6. PROBLEEMOPLOSSING
Made in China | Designed in Spain
8. RECYKLING SPRZĘTU AGD
Fig./Img./Abb./Rys/Obr. 1
Fig./Img./Abb./Rys/Obr. 2
Fig./Img./Abb./Rys/Obr. 3
Fig./Img./Abb./Rys/Obr. 4
Fig./Img./Abb./Rys/Obr. 5
Fig./Img./Abb./Rys/Obr. 6
Fig./Img./Abb./Rys/Obr. 7
Fig./Img./Abb./Rys/Obr. 8
Fig./Img./Abb./Rys/Obr. 9
Fig./Img./Abb./Rys/Obr. 10
Fig./Img./Abb./Rys/Obr. 11
Fig./Img./Abb./Rys/Obr. 12
Fig./Img./Abb./Rys/Obr. 13
www.cecotec.es
Quart de Poblet, Valencia (Spain)
YV01201102
Brand : CECOTEC
Model : Forcesilence Aero 450
Category : Ceiling fan