VR-HDMI-4K60 - Wi-Fi repeater Black Box - Free user manual and instructions
Find the device manual for free VR-HDMI-4K60 Black Box in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wi-Fi Repeater / Extender |
| Brand | Black Box |
| Model | VR-HDMI-4K60 |
| Wireless Standards | IEEE 802.11ac/n/g/b/a |
| Frequency Band | Dual-band 2.4 GHz / 5 GHz |
| Maximum Data Rate | 1200 Mbps (300 Mbps on 2.4 GHz + 867 Mbps on 5 GHz) |
| Ethernet Ports | 1 x Gigabit Ethernet (RJ45) |
| Security | WPA/WPA2-PSK, WEP, WPS |
| Power Input | 5V DC, 1A (via micro USB) |
| Dimensions (W x D x H) | 110 x 60 x 40 mm |
| Weight | 120 g |
| Operating Temperature | 0°C to 40°C |
| LED Indicators | Power, WPS, Signal Strength |
| Setup Method | Web interface or mobile app |
| Warranty | 1 year limited warranty |
| Package Contents | VR-HDMI-4K60, power cable, Ethernet cable, quick start guide |
Frequently Asked Questions - VR-HDMI-4K60 Black Box
What is the range of the VR-HDMI-4K60?
The range is up to 300 meters in open space, but walls and obstacles significantly reduce coverage. For best results, place the repeater within the router's Wi-Fi range.
How do I set up the Wi-Fi repeater?
Plug in the repeater, connect your device to its default Wi-Fi network (SSID: BlackBox_XXXX), open a browser and go to 192.168.1.1, then follow the on-screen setup wizard to select your main router's network and enter the password.
Can it work with any router?
Yes, the repeater is compatible with any standard router that supports IEEE 802.11ac/n/g/b/a, regardless of brand or model.
What do the LED lights mean?
Solid green indicates good connection to the router, blinking green means connection in progress, red indicates weak or no connection, off means power is not supplied.
How do I reset to factory settings?
Press and hold the reset button (located on the side) for about 10 seconds until the LED blinks rapidly. Release the button. The repeater will reboot and restore default settings.
Does it support WPA3 security?
No, the VR-HDMI-4K60 only supports WPA/WPA2-PSK and WEP. WPA3 is not available on this model.
Where should I place the repeater?
Place it halfway between your router and the area with weak signal, but within the router's effective range. Avoid placing it near metal objects or large appliances that cause interference.
How to update firmware?
Download the latest firmware from the Black Box support site. Log into the web interface, go to Administration > Firmware Upgrade, upload the file, and wait for the update to complete. Do not power off during update.
Can it be used as a wired access point?
Yes, connect an Ethernet cable from the repeater's port to your router, then log into the web interface and switch the working mode from Repeater to Access Point (AP) mode.
Why is my connection slow?
Slow speeds can be due to interference from other electronics, thick walls, or incorrect placement. Try positioning the repeater closer to the router, using the 5 GHz band, and ensuring no overlapping channels.
User questions about VR-HDMI-4K60 Black Box
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Wi-Fi repeater in PDF format for free! Find your manual VR-HDMI-4K60 - Black Box and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VR-HDMI-4K60 by Black Box.
USER MANUAL VR-HDMI-4K60 Black Box
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Black Box
Model : VR-HDMI-4K60
Category : Wi-Fi repeater