MOT-4518 - Saw Truper - Free user manual and instructions
Find the device manual for free MOT-4518 Truper in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Compound Miter Saw |
| Brand | Truper |
| Model | MOT-4518 |
| Blade Diameter | 10 in (254 mm) |
| Motor Power | 15 A (1800 W) |
| No-Load Speed | 4800 RPM |
| Cutting Capacity at 90° | 6 in height x 12 in width (152 mm x 305 mm) |
| Cutting Capacity at 45° | 4 in height x 8 in width (102 mm x 203 mm) |
| Miter Range | 0° to 45° left and right |
| Bevel Range | 0° to 45° left |
| Weight | 45 lbs (20.4 kg) |
| Power Supply | 120 V / 60 Hz |
| Cord Length | 6 ft (1.8 m) |
| Laser Guide | Yes |
| Dust Port | 1-1/4 in (32 mm) |
| Safety Features | Electric brake, blade guard |
| Included Accessories | Carbide-tipped blade, wrench, dust bag |
| Warranty | 1 year |
Frequently Asked Questions - MOT-4518 Truper
How do I replace the blade on my Truper MOT-4518 saw?
Unplug the saw, press the spindle lock, then use the included wrench to loosen the arbor bolt. Remove the old blade and install the new one with teeth facing forward. Tighten the bolt securely.
How do I adjust the miter angle?
Loosen the miter lock handle, rotate the saw base to the desired angle, and re-tighten the handle. The scale shows preset stops at common angles.
How do I make a bevel cut?
Release the bevel lock lever, tilt the saw head to the desired angle (up to 45° left), then lock it. Ensure the blade guard moves freely before cutting.
How do I use the laser guide?
Turn on the laser using the switch on the handle. The laser line indicates the cut path. Adjust the laser alignment if needed using the screws near the laser housing.
What type of blade should I use?
Use a 10-inch blade with a 5/8-inch arbor. For general cutting, a 60-tooth carbide-tipped blade is recommended for smooth cuts.
What safety precautions should I follow?
Always wear safety glasses, keep hands away from the blade path, and never perform cuts without the blade guard in place. Disconnect power when changing blades or performing maintenance.
How do I clean and maintain the saw?
Regularly remove sawdust from the motor vents and blade area. Wipe the base with a dry cloth. Lubricate the pivot points with a silicone-based lubricant.
Does the saw have an electric brake?
Yes, the electric brake stops the blade within seconds of releasing the trigger for enhanced safety.
What is the maximum cutting depth?
At 90°, the maximum cut depth is 6 inches for vertical cuts and 12 inches for horizontal crosscuts.
How do I attach a vacuum for dust collection?
Connect a shop vacuum hose to the 1-1/4 inch dust port on the back of the saw. Secure it with a clamp if needed. The included dust bag can also be used.
User questions about MOT-4518 Truper
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Saw in PDF format for free! Find your manual MOT-4518 - Truper and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MOT-4518 by Truper.
USER MANUAL MOT-4518 Truper
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Truper
Model : MOT-4518
Category : Saw