Spacemaker CO100 - Can opener BLACK & DECKER - Free user manual and instructions
Find the device manual for free Spacemaker CO100 BLACK & DECKER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Can opener |
| Brand | Black & Decker |
| Model | Spacemaker CO100 |
| Installation | Under-cabinet mount |
| Power Source | 120 V AC, 60 Hz |
| Power Consumption | 100 W (typical) |
| Dimensions (W x D x H) | 13 x 4.5 x 3 inches |
| Weight | 1.5 lb |
| Cutting Mechanism | Rotating blade |
| Magnetic Lid Holder | Yes |
| Automatic Start | Yes, when lid is placed |
| Can Size Compatibility | Standard round cans |
| Knife Sharpener | No (not on this model) |
| Cord Length | 2.5 ft |
| Housing Material | Plastic and metal |
| Color | White |
| Maintenance | Wipe with damp cloth; do not immerse |
| Safety Features | Automatic shut-off after can is opened |
| Spare Parts Availability | Replacement blades and magnets available |
| Repairability | Limited; professional repair recommended |
| Warranty | 2 years limited |
Frequently Asked Questions - Spacemaker CO100 BLACK & DECKER
How do I install the Spacemaker CO100 under a cabinet?
The unit comes with a mounting bracket. Screw the bracket under the cabinet using the provided screws, then slide the opener onto the bracket until it clicks.
Can it open cans of any size?
It is designed for standard round cans up to a certain height. Very tall or oversized cans may not fit. Always check the clearance.
How do I clean the can opener?
Unplug the unit. Wipe the exterior with a damp cloth. The cutting blade can be cleaned with a brush; do not immerse in water.
What should I do if the opener stops working mid-cycle?
Check if the can is properly positioned. If jammed, unplug, rotate the manual release knob clockwise to free the can, then remove.
Is there a knife sharpener on this model?
No, the CO100 does not include a knife sharpener. It is a dedicated can opener.
How do I replace the cutting blade?
Unplug the opener. Press the release tab under the head to remove the blade assembly. Slide in a new blade until it locks. Replacement blades are available.
Why does the opener leave sharp edges on the lid?
This is normal. The blade cuts through the lid, leaving a sharp edge. Handle the removed lid with care.
Can I use the opener on cans with pull tabs?
Yes, but remove the pull tab first to avoid interference with the cutting mechanism.
What if the magnet doesn't hold the lid?
Clean the magnet surface. If still weak, the magnet may need replacement. Contact customer support for spare parts.
The unit is noisy. Is this normal?
Some noise is expected during operation. If it becomes excessively loud, check for obstructions or worn gears. Lubrication is not required.
User questions about Spacemaker CO100 BLACK & DECKER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Can opener in PDF format for free! Find your manual Spacemaker CO100 - BLACK & DECKER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Spacemaker CO100 by BLACK & DECKER.
USER MANUAL Spacemaker CO100 BLACK & DECKER
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BLACK & DECKER
Model : Spacemaker CO100
Category : Can opener