DS-K1102AEMK - Access Control System Hikvision - Free user manual and instructions
Find the device manual for free DS-K1102AEMK Hikvision in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Access Control Keypad Reader |
| Brand | Hikvision |
| Model | DS-K1102AEMK |
| Dimensions | 125 x 85 x 22 mm |
| Weight | 0.3 kg |
| Power Supply | 12V DC |
| Operating Temperature | -30°C to +60°C |
| Card Frequency | 125 kHz (EM) |
| Keypad | 12-key backlit keypad |
| Communication | Wiegand output |
| Protection Rating | IP65 (weatherproof) |
| Security Features | Tamper alarm, card + PIN authentication |
| Installation | Surface mount |
| Compatibility | Hikvision access controllers |
| Maintenance | Clean with dry cloth |
| Spare Parts | Not applicable (integrated unit) |
| Reparability | No user-serviceable parts; contact manufacturer |
| Certifications | CE, FCC |
Frequently Asked Questions - DS-K1102AEMK Hikvision
How do I reset the DS-K1102AEMK to factory defaults?
To reset, press and hold the tamper button for 10 seconds while powering on. The device will reboot and reset to factory settings. Refer to the manual for detailed steps.
What type of cards does the DS-K1102AEMK support?
It supports 125 kHz EM proximity cards (e.g., EM4100). Cards must be programmed via the connected controller.
Can I use the keypad alone without a card?
Yes, the keypad supports PIN-only mode. You can configure it to require only a PIN code for access.
How do I connect the reader to a Hikvision access controller?
Connect Wiegand Data0 (green), Data1 (white), ground, and power lines to the controller's corresponding terminals. Ensure correct wiring per the controller manual.
Is the DS-K1102AEMK weatherproof?
Yes, it has an IP65 rating, making it suitable for outdoor use. Protect from direct water jets.
What is the maximum read range of the card reader?
The typical read range is 5-15 cm depending on the card quality and environmental conditions.
How do I add a new card to the system?
Card enrollment is done via the access controller software or keypad programming mode. Follow the controller's instructions to add card numbers.
What should I do if the keypad is unresponsive?
Check power supply (12V DC), wiring connections, and ensure the device is not in tamper alarm mode. If still unresponsive, try a factory reset.
Can I mount the reader on a metal surface?
Yes, but read range may decrease. Use a spacer if needed to maintain performance.
What is the LED indicator meaning?
The blue LED indicates ready, green means access granted, red means denied or alarm. Refer to the manual for detailed LED patterns.
User questions about DS-K1102AEMK Hikvision
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Access Control System in PDF format for free! Find your manual DS-K1102AEMK - Hikvision and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DS-K1102AEMK by Hikvision.
USER MANUAL DS-K1102AEMK Hikvision
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Hikvision
Model : DS-K1102AEMK
Category : Access Control System