KR702E - Access Control ZKTeco - Free user manual and instructions
Find the device manual for free KR702E ZKTeco in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Access Control Terminal |
| Brand | ZKTeco |
| Model | KR702E |
| Dimensions | 180 x 80 x 35 mm |
| Weight | 0.5 kg |
| Power Supply | DC 12V, 3A |
| Authentication Methods | Fingerprint, Face Recognition, RFID Card, PIN |
| Fingerprint Sensor | Optical sensor, 500 DPI |
| Face Recognition | Dual camera infrared, up to 1.5 m |
| User Capacity | 3,000 fingerprints, 1,000 faces, 10,000 cards |
| Transaction Storage | 100,000 logs |
| Display | 2.8 inch TFT color screen |
| Communication | TCP/IP, USB Host, RS485, Wiegand |
| Operating Temperature | 0°C to 45°C |
| Operating Humidity | 20% to 80% RH |
| Languages Supported | English, Chinese, Spanish, etc. |
| Voice Prompts | Built-in speaker |
| Protection Rating | IP65 (front panel) |
| Tamper Switch | Yes, anti-tamper |
| Included Accessories | Mounting bracket, power adapter, screws, manual |
| Certifications | CE, FCC, RoHS |
Frequently Asked Questions - KR702E ZKTeco
How do I perform a factory reset on the KR702E?
To factory reset, press and hold the reset button (located on the back panel) for 5 seconds using a paperclip. Confirm on the screen to restore default settings.
Can the KR702E be used outdoors?
The front panel has an IP65 rating, making it weather-resistant. However, avoid direct sunlight or extreme temperatures for prolonged periods.
How many users can be enrolled in the terminal?
The device supports up to 3,000 fingerprint templates, 1,000 face patterns, and 10,000 RFID cards, with a total transaction storage of 100,000 logs.
What communication protocols are supported?
It supports TCP/IP for network connection, RS485 for serial communication, Wiegand for external readers, and USB host for data transfer.
How do I clean the fingerprint sensor?
Gently wipe the sensor with a soft, dry microfiber cloth. Avoid using liquids or abrasive cleaners. For stubborn dirt, slightly dampen the cloth with isopropyl alcohol.
Can the device operate without a network connection?
Yes, it can operate standalone. However, for centralized management and event logging, network connection (TCP/IP) is recommended.
How do I enroll a new fingerprint?
Navigate to Menu > User Management > Add User. Select fingerprint, then place the same finger three times on the sensor until enrollment is successful.
What should I do if the screen shows 'Network Error'?
Check the Ethernet cable connection and ensure the device IP settings match your network. Restart the device and router if necessary.
Is the face recognition affected by glasses or masks?
The face recognition works with glasses and light makeup. For masks, the device may struggle; consider using fingerprint or card as an alternative.
What types of cards are compatible with the KR702E?
It supports 125 kHz EM cards and 13.56 MHz Mifare cards. Ensure the card format matches the device settings.
User questions about KR702E ZKTeco
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Access Control in PDF format for free! Find your manual KR702E - ZKTeco and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KR702E by ZKTeco.
USER MANUAL KR702E ZKTeco
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ZKTeco
Model : KR702E
Category : Access Control