CECOTEC Scoba 2100 Jalisco - Stick vacuum

Scoba 2100 Jalisco - Stick vacuum CECOTEC - Free user manual and instructions

Find the device manual for free Scoba 2100 Jalisco CECOTEC in PDF.

📄 92 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice CECOTEC Scoba 2100 Jalisco - page 7
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Cordless Stick Vacuum Cleaner
Brand Cecotec
Model Scoba 2100 Jalisco
Dimensions (H x W x D) 110 x 25 x 18 cm
Weight 3.5 kg
Power Supply Rechargeable lithium-ion battery 22.2 V, 2000 mAh
Runtime Up to 40 minutes in standard mode
Charging Time Approximately 4 to 5 hours
Dust Container Capacity 500 ml
Filtration System Washable HEPA Filter
Brush Type Motorized brush for hard floors and carpets
Main Features Turbo mode, battery indicator, 180° swivel
Included Accessories Crevice tool, furniture brush, wall mount
Maintenance Empty container after each use, clean filter every month
Noise Level Approximately 78 dB(A)
Body Material ABS Plastic
Warranty 2 years
Repairability Spare parts available (battery, filter, brush)
Safety Automatic shut-off in case of overheating

Frequently Asked Questions - Scoba 2100 Jalisco CECOTEC

How do I empty the dust container?
Press the container release button, remove it, then empty the contents into a trash can. Close until it clicks.
How do I clean the HEPA filter?
Remove the filter, tap it to remove dust, then wash it with warm water. Let it dry completely before reinstalling.
The battery won't hold a charge, what should I do?
Check that the charger is plugged in. If the problem persists, the battery needs to be replaced. Contact customer service for a replacement part.
Can I use the vacuum on hard floors?
Yes, the motorized brush is suitable for hard floors like tile and hardwood. You can also turn off the brush if needed.
How do I activate turbo mode?
Press the power button a second time to switch to turbo mode. The battery indicator blinks faster.
The vacuum stops during use, why?
This may be due to overheating or a blockage. Turn off the appliance, clean the filter, and check the brush. Allow it to cool before restarting.
How do I mount the wall bracket?
Attach the bracket to the wall using wall plugs and screws (not included). Place the vacuum on the bracket aligning the notches.
What is the battery lifespan?
Under normal use, the lithium-ion battery lasts approximately 500 charge cycles. After that, its runtime gradually decreases.
Can I vacuum liquids with this vacuum?
No, this vacuum is designed for dry use only. Vacuuming liquids can damage the motor and filter.
Where can I find spare parts?
Spare parts (filter, battery, brush) are available on the official Cecotec website or from authorized retailers.

User questions about Scoba 2100 Jalisco CECOTEC

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Stick vacuum in PDF format for free! Find your manual Scoba 2100 Jalisco - CECOTEC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Scoba 2100 Jalisco by CECOTEC.

USER MANUAL Scoba 2100 Jalisco CECOTEC

Safety instructions 7

  1. Parts and components 39
  2. Before use 39
  3. Operation 40
  4. Cleaning and maintenance 41
  5. Troubleshooting 43
  6. Technical specifications 43
  7. Disposal of old electrical and electronic appliances 44
  8. Technical support and warranty 44
  9. Copyright 44

SOMMAIRE

Before using the appliance, read the following instructions carefully. Keep this instruction manual for future reference or new users.

  • This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children must not play with the appliance. Cleaning and user maintenance should not be carried out by unsupervised children.
  • WARNING: the appliance has rotating parts which may pose a risk of entrapment. Exercise extreme caution.
  • Check the vacuuming tube from time to time to make sure it is not blocked.
  • This appliance is designed for domestic use only and is not intended for bars, restaurants, farmhouses, hotels, motels, and offices.
  • Inspect the power cord regularly for visible damage, especially the cord, plug, and charger casing. If the power cord is damaged, it must be replaced with a special cord or set to be supplied by the official Cecotec Technical Support

Service. The power adapter is to be properly discarded.

  • The appliance must be powered at a low safety voltage as stated on the product marking.
  • Do not try to repair the appliance by yourself. Contact the official Cecotec Technical Support Service for advice.
  • Ensure that the mains voltage matches the voltage specified on the appliance marking and that the mains plug is earthed.
  • Do not use the appliance if it has been dropped or if there are any visible signs of damage.
  • Do not use any accessory that has not been recommended by Cecotec, as they might cause injuries or damage.
  • Do not place the appliance close to heat sources, flammable substances, or wet surfaces where it could fall, nor allow it to come into contact with water or other liquids. Do not use outdoors.
  • Do not use the appliance to vacuum liquids, lighted matches, cigarette ends, hot ash, or on wet surfaces.
  • Stop using the appliance if you sense an abnormal sound or a temperature higher than usual.
  • Keep the air outlet unblocked to avoid losing suction power.
  • Do not block the appliance openings or air flow. Keep openings free of any objects, and do not block them with clothes or your fingers.
  • Do not pull on the cord to disconnect the appliance. Pull from the plug.
  • Do not immerse the cord, plug, or any other part of the appliance in water or any other liquid, or expose electrical connections to water. Make sure your hands are dry before handling the plug or switching on the appliance.

Battery instructions

- WARNING: to recharge the battery, use only the power supply

included with the appliance, with reference TYGSDC1800500.

  • The appliance contains a battery that should only be replaced by qualified personnel.
  • Keep the batteries out of the reach of children. Pay particular attention to small batteries. In case of battery ingestion, please seek medical attention immediately.
  • Do not expose the battery to heat or fire. Avoid storage in direct sunlight.
  • Do not short-circuit the battery. Do not store batteries in an untidy manner, in a box, or drawer where they can short-circuit each other or be short-circuited by other metal objects.
  • Do not subject batteries to mechanical shock.
  • Both batteries and cells can leak under extreme conditions. In the event of a battery leak, keep your skin and eyes away from the liquid. If the liquid gets into contact with skin, wash immediately with soap and water. If the liquid gets into the eyes, wash them immediately with clean water for a minimum of 10 minutes and seek medical attention. Wear gloves to handle the battery and dispose of it immediately in accordance with local regulations.
  • Do not use any charger other than the one supplied specifically for this appliance.
  • Secondary batteries must be charged before use. Always use the specified charger and refer to these instructions.
  • Do not leave the battery on prolonged charge when not in use.
  • After long periods of storage, it may be necessary to charge and discharge the batteries several times to obtain maximum performance.
  • Keep this instruction manual for future reference.
  • Use the battery only for its intended purpose, i.e. for use

with this device.

- Non-rechargeable batteries should not be recharged.

INSTRUCTIONS DE SÉCURITÉ

  1. Rope
  2. Power button
  3. Speed-control button
  4. Dust tank
  5. Vacuuming tube
  6. Motorised brush
  7. Power adapter
  8. Accessory for upholstery
  9. Accessory for furniture and corners
  10. Vacuuming-tube release button
  11. Motorised-brush release button

NOTE:

The graphics in this manual are schematic representations and may not exactly match the product.

2. BEFORE USE

  • This appliance is packaged in a way as to protect it during transport. Take the appliance out of its box and remove all packaging materials. You can keep the original box and other packaging elements in a safe place. This will help you prevent product damage when transporting it in the future. In case the original packaging is disposed of, make sure all packaging materials are recycled accordingly.
  • Make sure all parts and components are included and in good conditions. If there is any piece missing or in bad conditions, contact the official Cecotec Technical Support Service immediately.

Box contents

  • Scoba 2100 Jalisco Handheld vacuum cleaner
  • Vacuuming tube
  • Motorised and Jalisco brush.
  • Power adapter
  • Accessory for upholstery
  • Accessory for furniture and corners
  • Instruction manual
  • Wall bracket

3. OPERATION

Warning:

  • Do not use the vacuum cleaner with the adapter connected.
  • Regularly check that the motorised brush is clean, as foreign objects can scratch sensitive floors.

You can use this vacuum cleaner in two different manners:

  • Handheld vacuum cleaner, attaching the accessories directly to the main body.
  • Upright vacuum cleaner, using the vacuuming tube with the accessories assembled.

Using the vacuum cleaner

  1. Make sure the vacuum cleaner's adapter is not connected.
  2. Press the power button to turn the vacuum cleaner on.
  3. Use the speed-control knob to set the desired speed.

Attachments

This device includes different accessories that allow cleaning different types of surfaces, objects, and dirt. Some of them are suitable for the upright vacuum cleaner, and others are preferably used with the handheld one.

Assembling the vacuuming tube and the motorised brush. Fig. 2

  • To install the motorised brush into the vacuuming tube, align both of them making sure the tab on the motorised brush matches the guides on the tube, and introduce one into the other until they are firmly fixed.
  • To disassemble them, press the motorised-brush release button, and pull from the vacuuming tube while you hold the vacuuming brush head.

Jalisco brush:

  • The Jalisco brush is located inside the motorised brush. Install the motorised brush to the upright vacuum cleaner.
  • The Jalisco brush is especially designed for cleaning hard floors, but can be used to efficiently clean soft floors too.

Accessory for upholstery. Fig. 3

This accessory is used for an intense cleaning of upholstered furniture.

  1. To install the accessory for upholstery to the main body, align the two parts so that they fit together until it snaps into place.
  2. To remove, pull the accessory while holding the main body firmly.

Accessory for corners and furniture. Fig. 4

This accessory allows cleaning furniture without damaging it and reaching less accessible dirt in corners.

  1. To install the accessory for corners and furniture to the main body, align the two parts so that they fit together until it snaps into place.
  2. To remove, pull the accessory while holding the main body firmly.

Indicator light. Fig. 5

  • When the vacuum cleaner is charging, the indicator will light up and keep flashing.
  • When the vacuum cleaner is fully charged, the indicator will stop flashing and light up steady.
  • When using the vacuum cleaner, the indicator will stay lit.
  • When the vacuum cleaner's battery is low, the indicator will flash.

Installing the wall bracket

Fig. 6

  1. Place the wall bracket on the wall and mark the points where the holes are to be drilled to fix the bracket. It is important that the suction base rests on the floor so that the wall bracket does not support the full weight of the vacuum cleaner.
  2. Drill the 3 holes (previously marked) and insert the pegs and screws.
  3. Make sure that the charging base is securely fixed to the wall and place the vacuum cleaner on the bracket, inserting the charging terminals of the vacuum cleaner into the charging terminals of the bracket (plastic tab).
  4. Once the wall bracket is installed, connect the power adapter to the charging port, and then you can charge the vacuum cleaner by simply sliding it up and down the wall bracket.

Charging the vacuum cleaner. Fig. 7

  1. Make sure the vacuum cleaner is switched off.
  2. Plug the adapter into a socket and the vacuum cleaner.
  3. An indicator light will light up and keep flashing once the adapter is connected to the vacuum cleaner.
  4. To ensure that the device is always ready for use, we recommend you leave the device charging when not in use.
  5. It's normal for the adapter to become warm during charging.

4. CLEANING AND MAINTENANCE

  • Turn the appliance off, unplug it from the power socket and allow it to cool down before cleaning it.
  • Use a soft, slightly dampened cloth to clean the surface of the device.

ENGLISH

  • Never immerse the device in water or other liquids, do not allow liquids to enter the device.
  • Do not use abrasive cleaners or scouring pads to clean the product.
  • Do not leave the device in a place with direct sunlight.
  • Do not leave the device in a wet place after cleaning it.
  • After the brush has been used for a long time, bristles might start to tangle with hair and other particles. Clean it in order for it to operate correctly again.

Filters and tank cleaning. Fig. 8

  • To avoid the appliance from overheating and losing suction power, it is suggested to clean the filters frequently. To make the most of the suction power, it is suggested to clean the filter after every use.
  • The filters shelf life will depend on the accumulated use and the type of particles which are frequently vacuumed. It is recommended to replace the filters approximately every 6 months.
  • Make sure the vacuum cleaner is switched off and is not connected to a mains socket.
  • Press the dust-tank release button and remove it.
  • Remove the filter system from inside the tank and separate the filters for cleaning.
  • Put the filters back in their original position inside the dust tank.
  • Refit the dust tank.
  • Vacuum and shake the filters to remove every particle and dust remain that may block them and difficult the correct air circulation. Remember not to use the vacuum cleaner without the filters properly assembled.
  • Filters cannot be washed inside a washing machine nor dried with a hair dryer.
  • Do not brush the high-efficiency filter.

Cleaning the Jalisco brush

The main brush rotates at high speed and helps pulling the dirt into the suction mouth. This brush is in contact with the floor, and therefore with dirt, so it can be worn out over time, negatively affecting cleaning efficiency. It is recommended to clean the Jalisco brush once a week (depending on usage frequency).

  1. Make sure the vacuum cleaner is switched off and is not connected to a mains socket.

  2. Slide the tab located on the side of the motorised brush. Fig. 9

  3. You can then remove the Jalisco brush from inside the motorised brush and clean it.

- To avoid damage to the brush, you must remove any hair wrapped around the Jalisco brush.

- You can clean the Jalisco brush with warm water, do not use soap or detergents. However, it is recommended that you shake it out or vacuum it, to avoid inserting it wet in motorised brush.

- If you decide to wash the Jalisco brush, make sure it is completely dry before installing it again on the vacuum cleaner.

- When replacing the Jalisco brush, make sure it is properly installed.

5. TROUBLESHOOTING

ProblemPossible causePossible solution
The vacuum cleaner does not work.The battery is exhausted.Charge the battery.
No suction or low suction power.The dust tank is full or clogged.The dust tank was not installed correctly.The filter needs to be cleaned.Empty the dust tank and clean the filter.Install the dust tank properly.Clean the filters.
The vacuum cleaner does not charge.The power adapter was not plugged in correctly.You are not using the appropriate charger.Check that the adapter and the plug are properly connected.Use only the charger provided with the vacuum cleaner.

6. TECHNICAL SPECIFICATIONS

Scoba 2100 Jalisco

Product reference: 08403

Motor rated power: 200 W

Charger output: 18 V = 0.5 A

Battery data:

14,8 V = 2500 mAh 37 Wh

Reference: Scoba 2100 Jalisco Battery Pack

Input: 18 V, 0.5 A

Type: SF18650NR-22

Technical specifications may change without prior notification to improve product quality.

Made in China | Designed in Spain

7. DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC APPLIANCES

CECOTEC Scoba 2100 Jalisco - DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC APPLIANCES - 1

This symbol indicates that, according to the applicable regulations, the product and/or battery must be disposed of separately from household waste. When this product reaches the end of its shelf life, you should dispose of the cells/batteries/accumulators and take them to a collection point designated by the local authorities.

CECOTEC Scoba 2100 Jalisco - DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC APPLIANCES - 2

Consumers must contact their local authorities or retailer for information concerning the correct disposal of old appliances and/or their batteries.

Compliance with the above guidelines will help protecting the environment.

8. TECHNICAL SUPPORT AND WARRANTY

Cecotec shall be liable to the end user or consumer for any lack of conformity that exists at the time of delivery of the product under the terms, conditions, and deadlines established by the applicable regulations.

It is recommended that repairs be carried out by qualified personnel.

If at any moment you detect any problem with your product or have any doubt, do not hesitate to contact the official Cecotec Technical Support Service at +34 963 210 728.

The intellectual property rights over the texts in this manual belong to CECOTEC INNOVACIONES, S.L. All rights reserved. The contents of this publication may not, in whole or in part, be reproduced, stored in a retrieval system, transmitted, or distributed by any means (electronic, mechanical, photocopying, recording or similar) without the prior authorization of CECOTEC INNOVACIONES, S.L.

1. PIÈCES ET COMPOSANTS

Img. 1

Installation du support mural

Img. 6

5. PROBLEEMOPLOSSING

Reference: Scoba 2100 Jalisco Battery Pack

Vstup: 18 V, 0.5 A

Typ: SF18650NR-22

Fig./Img./Abb./Afb./Rys./Obr. 2

CECOTEC Scoba 2100 Jalisco - PROBLEEMOPLOSSING - 1

Fig./Img./Abb./Afb./Rys./Obr. 3

CECOTEC Scoba 2100 Jalisco - PROBLEEMOPLOSSING - 2

Fig./Img./Abb./Afb./Rys./Obr. 4

CECOTEC Scoba 2100 Jalisco - PROBLEEMOPLOSSING - 3

Fig./Img./Abb./Afb./Rys./Obr. 5

CECOTEC Scoba 2100 Jalisco - PROBLEEMOPLOSSING - 4

Fig./Img./Abb./Afb./Rys./Obr. 6

CECOTEC Scoba 2100 Jalisco - PROBLEEMOPLOSSING - 5

Fig./Img./Abb./Afb./Rys./Obr. 7

CECOTEC Scoba 2100 Jalisco - PROBLEEMOPLOSSING - 6

Fig./Img./Abb./Afb./Rys./Obr. 8

CECOTEC Scoba 2100 Jalisco - PROBLEEMOPLOSSING - 7

Fig./Img./Abb./Afb./Rys./Obr. 9

www.cecotec.es

Quart de Poblet, Valencia (Spain)

LI01221228

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : CECOTEC

Model : Scoba 2100 Jalisco

Category : Stick vacuum