FDV 10202-A - Drill Fieldmann - Free user manual and instructions
Find the device manual for free FDV 10202-A Fieldmann in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Drill |
| Brand | Fieldmann |
| Model | FDV 10202-A |
| Dimensions (approx.) | 250 x 80 x 200 mm |
| Weight (approx.) | 1.5 kg |
| Power Supply | 230 V AC, 50 Hz |
| Power Input | 600 W |
| No-Load Speed | 0 – 3000 rpm (variable) |
| Chuck Capacity | 1 – 10 mm |
| Drilling Capacity (Steel) | 10 mm |
| Drilling Capacity (Wood) | 25 mm |
| Main Functions | Drilling, screwdriving |
| Additional Features | Reverse function, depth stop, auxiliary handle |
| Safety Features | Double insulation, lock button for continuous operation |
| Cleaning | Wipe with a dry cloth; do not use water |
| Spare Parts Available | Carbon brushes, chuck, power cord |
| Repairability | Carbon brushes user-replaceable; other repairs by qualified technician |
| General Information | Designed for home DIY and light professional use |
Frequently Asked Questions - FDV 10202-A Fieldmann
What drill bits can I use with the FDV 10202-A?
Use drill bits with a shank diameter of 1 to 10 mm, suitable for wood, metal, and masonry (with appropriate bits).
How do I change the drill bit?
Loosen the chuck by turning it counterclockwise while holding the drill steady. Insert the bit, then tighten the chuck clockwise by hand or with the chuck key provided.
Can I use the drill for screwdriving?
Yes, the FDV 10202-A has a variable speed trigger and reverse function, making it suitable for driving screws with appropriate screwdriver bits.
What should I do if the drill stops working?
Check the power cord and plug, ensure the switch is on, and verify the carbon brushes are not worn. If the problem persists, contact a qualified technician.
How do I clean the drill?
Unplug the drill and wipe the exterior with a dry cloth. Do not use water or solvents. Clean ventilation slots with a soft brush.
Is the drill double insulated?
Yes, the FDV 10202-A features double insulation, so no earth wire is required. It is safe for use in standard household outlets.
What is the maximum drilling depth?
The maximum drilling depth depends on the bit length and material. Typically, with a standard 10 mm bit, you can drill up to 10 mm in steel and 25 mm in wood.
How do I adjust the speed?
The speed is controlled by the trigger pressure: lighter pressure for lower speed, full pressure for maximum speed. There is no electronic speed dial.
Can I use the drill in masonry?
Yes, but you must use a masonry drill bit and apply steady pressure. The drill does not have a hammer function, so it may be slower on hard materials.
Where can I find replacement carbon brushes?
Replacement carbon brushes are available from authorized Fieldmann service centers or online. Ensure you buy the correct size for the FDV 10202-A.
User questions about FDV 10202-A Fieldmann
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Drill in PDF format for free! Find your manual FDV 10202-A - Fieldmann and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FDV 10202-A by Fieldmann.
USER MANUAL FDV 10202-A Fieldmann
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Fieldmann
Model : FDV 10202-A
Category : Drill