FDV 10252-A - Drill Fieldmann - Free user manual and instructions
Find the device manual for free FDV 10252-A Fieldmann in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Drill |
| Brand | Fieldmann |
| Model | FDV 10252-A |
| Power Source | Corded electric (230 V~, 50 Hz) |
| Power Input | 600 W |
| No-Load Speed | 0–2800 rpm |
| Max Drilling Capacity (Steel) | 10 mm |
| Max Drilling Capacity (Wood) | 25 mm |
| Chuck Type | Keyless |
| Chuck Capacity | 1.5–13 mm |
| Reverse Function | Yes |
| Variable Speed Trigger | Yes |
| Lock-On Button | Yes |
| Auxiliary Handle | Included |
| Depth Stop | Included |
| Overall Length | Approx. 250 mm |
| Weight | 1.5 kg |
| Power Cord Length | 2 m |
| Protection Class | II (Double insulated) |
| Sound Pressure Level | 85 dB(A) |
| Vibration Level | 2.5 m/s² |
Frequently Asked Questions - FDV 10252-A Fieldmann
How do I change the drill bit?
To change the drill bit, rotate the chuck keyless sleeve counterclockwise to open the jaws, insert the bit, then tighten by rotating clockwise. Ensure the bit is secure before drilling.
How do I use the reverse function?
Locate the forward/reverse switch on the drill. Slide it to the right for forward rotation (drilling) and to the left for reverse (removing screws). Always wait for the motor to stop before switching.
What is the maximum drilling diameter?
The drill can handle up to 25 mm in wood and 10 mm in steel. For concrete, use a dedicated hammer drill.
How should I clean and maintain the drill?
Unplug the drill before cleaning. Wipe the exterior with a dry cloth. Do not use water or solvents. Keep ventilation slots free of dust. Periodically check the carbon brushes.
Why does the drill not start?
First, check that the power cord is plugged in and the outlet works. Ensure the forward/reverse switch is not in neutral position. If still not working, the carbon brushes may be worn.
Can I adjust the speed?
Yes, the drill has a variable speed trigger. Lightly press for low speed, press harder for higher speed. Use low speed for starting holes or driving screws.
Can I use this drill for concrete?
This drill is not a hammer drill, so it is not recommended for masonry. For occasional light drilling in concrete, use a carbide-tipped bit at low speed, but expect slow progress.
What accessories are included with the drill?
The drill comes with an auxiliary handle and a depth stop. No additional bits are included. A chuck key is not needed as the chuck is keyless.
How do I replace the carbon brushes?
Carbon brush replacement should be done by a qualified technician. Unplug the drill, remove the brush caps on the motor housing, and replace with identical brushes. Ensure they seat properly.
Is the drill double insulated?
Yes, the drill has Class II protection (double insulated), meaning no grounding is required. The plug has two pins.
User questions about FDV 10252-A Fieldmann
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Drill in PDF format for free! Find your manual FDV 10252-A - Fieldmann and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FDV 10252-A by Fieldmann.
USER MANUAL FDV 10252-A Fieldmann
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Fieldmann
Model : FDV 10252-A
Category : Drill