FDV 200711-E - Drill Fieldmann - Free user manual and instructions
Find the device manual for free FDV 200711-E Fieldmann in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electric Drill (Corded) |
| Brand | Fieldmann |
| Model | FDV 200711-E |
| Power Supply | 230 V ~ 50 Hz |
| Power Input | 680 W |
| No-Load Speed | 0 - 2800 rpm |
| Chuck Type | Keyless, 1.5 - 13 mm |
| Drilling Capacity (Steel) | 13 mm |
| Drilling Capacity (Wood) | 30 mm |
| Weight | 1.7 kg |
| Dimensions (LxWxH) | 270 x 70 x 220 mm |
| Protection Class | Class II (double insulated) |
| Main Functions | Drilling, screwdriving, hammer action (if applicable) |
| Speed Control | Variable speed trigger |
| Forward/Reverse | Yes |
| Maintenance | Clean ventilation slots, replace carbon brushes when worn |
| Safety Features | Lock-on button, safety clutch (if applicable) |
| Spare Parts Availability | Carbon brushes, chuck, switch, power cord |
| Warranty | 24 months |
Frequently Asked Questions - FDV 200711-E Fieldmann
How do I change the drill bit?
Turn the chuck counterclockwise to open the jaws, insert the bit, then tighten clockwise by hand until secure. For keyless chucks, no tool is needed.
Can the FDV 200711-E be used for screwdriving?
Yes, it has a variable speed trigger and forward/reverse switch, making it suitable for driving screws. Use screwdriver bits with the appropriate hex shank.
What is the maximum drilling capacity in wood?
The maximum drilling capacity in wood is 30 mm. For larger holes, use a hole saw.
How do I reverse the drill direction?
Locate the forward/reverse switch near the trigger. Push it to the left for forward, right for reverse. Ensure the drill is fully stopped before changing direction.
Is the drill suitable for masonry?
This model does not have a hammer function, so it is not recommended for masonry. Use a hammer drill for brick or concrete.
How do I clean the drill?
Unplug the drill, then wipe the exterior with a damp cloth. Do not use solvents. Clean the ventilation slots with a brush or compressed air to prevent dust buildup.
What should I do if the drill stops working?
Check the power cord and outlet. If the drill overheated, wait for it to cool. If the carbon brushes are worn, replace them. Consult a qualified technician if the issue persists.
How do I replace the carbon brushes?
Unscrew the brush holder caps on the motor housing, remove the old brushes, insert new ones, and tighten the caps. Use identical brushes to avoid damage.
What safety precautions should I take?
Always wear safety goggles and ear protection. Keep hands away from rotating parts. Do not operate in wet conditions. Disconnect the drill when changing bits or performing maintenance.
Does the drill have a lock-on button?
Yes, press the lock-on button located above the trigger to keep the drill running continuously. Press the trigger again to release.
User questions about FDV 200711-E Fieldmann
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Drill in PDF format for free! Find your manual FDV 200711-E - Fieldmann and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FDV 200711-E by Fieldmann.
USER MANUAL FDV 200711-E Fieldmann
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Fieldmann
Model : FDV 200711-E
Category : Drill