FDV 10253-A - Drill Fieldmann - Free user manual and instructions
Find the device manual for free FDV 10253-A Fieldmann in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Corded Power Drill |
| Brand | Fieldmann |
| Model | FDV 10253-A |
| Power Supply | 230 V ~ 50 Hz |
| Power Input | 750 W |
| No-Load Speed | 0 - 2800 rpm |
| Chuck Type | Keyless, 1.5 - 13 mm |
| Drilling Capacity (Steel) | 13 mm |
| Drilling Capacity (Wood) | 35 mm |
| Drilling Capacity (Concrete) | 16 mm |
| Variable Speed Trigger | Yes |
| Forward/Reverse Switch | Yes |
| Lock-On Button | Yes |
| Auxiliary Handle | Yes, included |
| Depth Stop | Yes, adjustable |
| Weight | 1.8 kg |
| Dimensions (L x H x W) | 280 x 200 x 70 mm |
| Power Cord Length | 2 m |
| Insulation Class | Class II (double insulated) |
| Protection Rating | IP20 |
| Sound Pressure Level | 88 dB(A) |
| Vibration Level (Drilling) | 6.5 m/s² |
| Maintenance | Keep ventilation slots clean; check carbon brushes regularly |
| Safety Features | Maintain a firm grip, use auxiliary handle, wear ear and eye protection |
Frequently Asked Questions - FDV 10253-A Fieldmann
How do I change the drill bit?
Turn the chuck ring counterclockwise to loosen, insert the bit, and tighten clockwise by hand or using the key if available. For keyless chucks, simply rotate until secure.
What is the maximum drilling capacity in concrete?
The FDV 10253-A can drill up to 16 mm in concrete using appropriate masonry bits.
Can the drill be used for screwdriving?
Yes, with a screwdriver bit and the variable speed trigger, you can drive screws. Adjust speed as needed for control.
How to reverse the direction of rotation?
Locate the forward/reverse switch near the trigger. Slide it left or right to change direction. Ensure the motor is stopped before switching.
How should I clean the drill?
Unplug the drill. Wipe the exterior with a dry cloth. Blow out dust from ventilation slots with compressed air. Do not use water or abrasive cleaners.
What should I do if the drill stops suddenly?
Check if the bit is jammed. Release the trigger immediately. Unplug and inspect the bit. Remove the obstruction. Overload protection may have activated; let the tool cool down.
Can I use the drill for hammer drilling?
No, the FDV 10253-A is a standard drill without hammer function. It is not suitable for concrete or masonry without a hammer action.
How often should I replace the carbon brushes?
Check carbon brushes every 50-100 hours of use or if you notice sparking or loss of power. Replace them when worn down to about 5 mm length.
Is the drill double insulated?
Yes, the drill is Class II double insulated, so it does not require an earth connection. It is safe to use with two-pin plugs.
What accessories come with the drill?
Typically the package includes the drill, auxiliary handle, depth stop, and a chuck key (if not keyless). Check the manual for exact contents.
User questions about FDV 10253-A Fieldmann
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Drill in PDF format for free! Find your manual FDV 10253-A - Fieldmann and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FDV 10253-A by Fieldmann.
USER MANUAL FDV 10253-A Fieldmann
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Fieldmann
Model : FDV 10253-A
Category : Drill