JCEI60-014535 - Range hood Jocel - Free user manual and instructions
Find the device manual for free JCEI60-014535 Jocel in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Range hood |
| Brand | Jocel |
| Model | JCEI60-014535 |
| Width | 60 cm |
| Depth | 50 cm |
| Height | 15-30 cm (adjustable) |
| Net Weight | 12 kg |
| Power Supply | 220-240 V, 50 Hz |
| Motor Power | 200 W |
| Max Airflow | 600 m³/h |
| Noise Level | 55 dB (avg) |
| Lighting | LED, 2x1.5 W |
| Controls | Push buttons |
| Installation Type | Wall-mounted |
| Venting Type | Ducted or recirculating |
| Filter Type | Aluminum mesh (grease) & charcoal |
| Filter Cleaning | Grease filter: monthly; charcoal: replace every 3-6 months |
| Material | Stainless steel |
| Safety Features | Overheat protection |
| Energy Class | A |
| Warranty | 2 years |
Frequently Asked Questions - JCEI60-014535 Jocel
How do I install the Jocel JCEI60-014535 range hood?
Installation must be done by a qualified technician. The hood should be mounted at least 65 cm above the cooking surface. Ensure proper ducting if using exhaust mode, or ensure charcoal filters are installed for recirculation mode. Refer to the manual for detailed steps.
How often should I clean the grease filter?
It is recommended to clean the aluminum grease filter every month. Wash it by hand with warm soapy water or in the dishwasher. Let it dry completely before reinstalling.
How do I replace the charcoal filter?
Charcoal filters should be replaced every 3-6 months, depending on usage. To replace, remove the grease filter, take out the old charcoal filter, and insert a new one. Make sure the filter is properly seated.
The hood is noisy. What could be the cause?
Excessive noise can be due to loose parts, a clogged filter, or improper installation. Check if the motor is securely mounted and that all screws are tight. Clean the filters. If noise persists, contact customer support.
Can I use the hood without ducting?
Yes, you can use the hood in recirculation mode. You must install charcoal filters (if not already fitted) and ensure the air is recirculated back into the kitchen. The hood comes with both ducted and recirculation options.
How do I adjust the fan speed?
The hood has push buttons for fan speed control. Typically, there are 3 speed settings. Press the desired button to increase or decrease the airflow.
What type of light bulb does the hood use?
The hood uses integrated LED lights (2x1.5 W). They are not user-replaceable; if they fail, the entire LED module may need to be replaced by a professional.
How do I reset the filter saturation indicator?
After cleaning or replacing the filters, press and hold the filter reset button (usually the same button as the light) for 3 seconds until the indicator turns off. Refer to the manual for exact procedure.
Why is the hood not turning on?
Check the power cord connection and ensure the circuit breaker is not tripped. Also verify that the plug is securely inserted. If it still doesn’t work, there may be a fuse issue; contact support.
Where can I find spare parts for my Jocel hood?
Spare parts such as filters, bulbs, and motor components can be ordered from authorized Jocel dealers or through the manufacturer's website. Use the model number JCEI60-014535 when ordering.
User questions about JCEI60-014535 Jocel
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual JCEI60-014535 - Jocel and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. JCEI60-014535 by Jocel.