52S160 - Water heater Rheem - Free user manual and instructions
Find the device manual for free 52S160 Rheem in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Residential Storage Water Heater |
| Model | 52S160 |
| Brand | Rheem |
| Capacity | 52 Gallons |
| Dimensions (H x D) | Approx. 59 in x 22 in |
| Weight | Approx. 150 lbs (empty) |
| Power Source | Natural Gas or Propane (Liquid Propane) |
| Input Rating | 36,000 BTU/h |
| Energy Factor | 0.67 |
| First Hour Rating | 62 Gallons |
| Maximum Temperature | 160°F (adjustable) |
| Safety Features | Flame arrestor, temperature pressure relief valve, flammable vapor ignition resistance |
| Key Functions | Automatic gas control, hot water delivery, temperature regulation |
| Installation Type | Indoor, vertical, floor-standing |
| Venting | Power vent or atmospheric vent (check local codes) |
| Warranty | 6 years tank and parts |
| Maintenance | Annual flush, anode rod inspection every 3 years, T&P valve test |
| Certifications | ANSI Z21.10.1, CSA 4.1 |
| Spare Parts Availability | Commonly available through Rheem dealers and online |
Frequently Asked Questions - 52S160 Rheem
What is the capacity of the Rheem 52S160 water heater?
The Rheem 52S160 has a capacity of 52 gallons, suitable for medium to large households.
What fuel type does the 52S160 use?
It is designed for natural gas or liquid propane (LP). Check the model code for specific fuel type.
How do I light the pilot on the Rheem 52S160?
Refer to the manual. Typically, turn the gas control knob to 'Pilot', depress and hold while lighting the pilot with a long lighter. Continue holding for 30 seconds after ignition.
What should I do if the water heater leaks?
Immediately turn off the gas supply and close the cold water inlet valve. Check for obvious sources like loose connections or T&P valve leakage. If tank leaks, replacement may be needed.
How often should I drain the water heater?
Rheem recommends annual flushing to remove sediment buildup, which improves efficiency and extends tank life.
What does the error code on the gas control valve mean?
Common codes: 1 flash = ignition failure; 2 flashes = flame lockout; 3 flashes = overheat. Consult the manual for detailed troubleshooting.
Can the Rheem 52S160 be installed outdoors?
This model is designed for indoor installation only. For outdoor use, consider a model specifically rated for outdoor exposure.
What is the temperature range of the thermostat?
The adjustable thermostat range is from 80°F to 160°F. The factory setting is typically 120°F to reduce scalding risk.
How do I replace the anode rod?
Turn off power/gas and water supply. Drain a few gallons. Unscrew the old anode rod using a 1-1/16 inch socket. Install new one with Teflon tape. Check annually.
Where can I find spare parts for the 52S160?
Authorized Rheem dealers, online retailers like Amazon or SupplyHouse.com. Always use genuine Rheem parts for safety and warranty.
User questions about 52S160 Rheem
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water heater in PDF format for free! Find your manual 52S160 - Rheem and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 52S160 by Rheem.
USER MANUAL 52S160 Rheem
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Rheem
Model : 52S160
Category : Water heater