TECC 125 - Water heater Rheem - Free user manual and instructions
Find the device manual for free TECC 125 Rheem in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Water Heater |
| Brand | Rheem |
| Model | TECC 125 |
| Capacity | 125 Liters |
| Power Rating | 2 kW |
| Voltage | 230 V / 50 Hz |
| Dimensions (H x Dia) | 1200 mm x 500 mm |
| Weight (Empty) | 30 kg |
| Temperature Range | 10°C to 75°C |
| Heating Element Type | Copper or Stainless Steel |
| Thermostat | Adjustable, with overheat protection |
| Safety Valve | Pressure Relief Valve (6 bar) |
| Anode Rod | Magnesium (replaceable) |
| Insulation | Polyurethane foam (CFC-free) |
| Energy Efficiency | Class C (typical) |
| Installation | Wall-mounted, vertical |
| Protection Class | IP24 (splash-proof) |
| Material (Tank) | Enameled steel |
| Material (Outer Casing) | Painted steel |
| Maintenance | Yearly flushing and anode rod check |
| Spare Parts Available | Thermostat, heating element, anode rod, safety valve |
Frequently Asked Questions - TECC 125 Rheem
How do I adjust the water temperature on my Rheem TECC 125?
Locate the thermostat cover screws, remove the cover, and adjust the dial to the desired temperature (recommended 55-60°C). Replace the cover before restoring power.
How often should I drain and flush my water heater?
It is recommended to drain and flush the tank at least once a year to remove sediment and maintain efficiency. Attach a hose to the drain valve, open it, and let water flow until clear.
What safety devices does the TECC 125 have?
The water heater is equipped with a pressure relief valve and a thermal cutoff to prevent overheating and overpressure. Do not tamper with these devices.
Why is my water not getting hot?
Possible causes: thermostat set too low, tripped thermal cutoff, failed heating element, or insufficient power supply. Check the circuit breaker and thermostat settings. If the issue persists, contact a professional.
Can I install the TECC 125 myself?
Installation should be performed by a qualified professional to ensure compliance with local electrical and plumbing codes. Improper installation may void the warranty.
What is the lifespan of the TECC 125?
With proper maintenance, the expected lifespan is 8-12 years. Replacing the anode rod every 3-5 years can extend tank life.
Does the water heater make noise during operation?
Some noise like slight humming or ticking is normal due to expansion/contraction. Loud banging or popping may indicate sediment buildup. Flush the tank to resolve.
How do I replace the anode rod?
Turn off power and water supply, drain the tank partially, remove the anode rod bolt (usually located on top), and install a new rod. Use Teflon tape on threads. Tighten securely.
What does the warranty cover?
Warranty typically covers tank leakage and defective parts for a certain period (e.g., 6 years on tank, 2 years on parts). Refer to the warranty document for details. Labor not included.
Can I use extension cords or timers with this water heater?
Do not use extension cords. For timers, ensure they are rated for the heater's load (2 kW) and installed by an electrician to avoid fire hazard.
User questions about TECC 125 Rheem
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water heater in PDF format for free! Find your manual TECC 125 - Rheem and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TECC 125 by Rheem.
USER MANUAL TECC 125 Rheem
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Rheem
Model : TECC 125
Category : Water heater