PowerSwitch S6010-ON - Network switch DELL - Free user manual and instructions
Find the device manual for free PowerSwitch S6010-ON DELL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Switch |
| Model | PowerSwitch S6010-ON |
| Brand | Dell |
| Dimensions (H x W x D) | 1.72 x 17.5 x 22.5 inches (4.37 x 44.45 x 57.15 cm) |
| Weight | 30 lbs (13.6 kg) |
| Ports | 32 x 40GbE QSFP+ (breakout to 128 x 10GbE with cables); 2 x 100GbE QSFP28; 2 x RJ45 10/100/1000 management |
| Power Supply | Dual redundant, hot-swappable AC 100-240V, 50-60Hz, typical 500W |
| Cooling | 4 hot-swappable fan modules, front-to-back airflow |
| Operating System | Dell OS10 (based on Open Networking, ONIE compatible) |
| Switching Capacity | 3.2 Tbps (full duplex) |
| Packet Forwarding Rate | Up to 2.38 Bpps |
| Layer Support | L2/L3, VLAN, VXLAN, MLAG, ACL, QoS |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Storage Temperature | -40°C to 70°C (-40°F to 158°F) |
| Humidity (Operating) | 10% to 85% (non-condensing) |
| Safety Certifications | UL, CSA, CE, FCC, RoHS |
| Mounting | 19-inch rack-mountable (1U) |
| Warranty | 1 year limited hardware warranty (extendable) |
| Maintenance | Clean with dry cloth; avoid liquids; ensure proper airflow |
| Spare Parts | Power supplies, fan modules, optics, cables (sold separately) |
| Repairability | Field-replaceable units (FRUs) for power and fans; contact Dell for board-level repair |
| Typical Application | Data center top-of-rack, spine-leaf, enterprise core |
Frequently Asked Questions - PowerSwitch S6010-ON DELL
How do I perform an initial setup of the Dell PowerSwitch S6010-ON?
Connect to the console port using an RJ45 to DB9 cable (or USB console cable) with settings 115200 baud, 8 data bits, 1 stop bit, no parity. Power on the switch and follow the ONIE installer prompts to load Dell OS10 or another network operating system. Then configure management IP via CLI.
Are the QSFP+ ports on the S6010-ON breakoutable?
Yes, each 40GbE QSFP+ port can be broken out into four 10GbE connections using breakout cables (QSFP+ to 4xSFP+). This provides up to 128 10GbE ports total.
What network operating systems are supported on this switch?
The S6010-ON runs Dell OS10 by default, but supports other ONIE-compatible NOS like Cumulus Linux, SONiC, and OpenSwitch. You can install them via the ONIE environment.
How do I reset the switch to factory defaults?
Press and hold the reset button (located on the front panel) for 10 seconds while the switch is powered on. Alternatively, use the CLI command 'restore factory-defaults' in OS10.
What is the maximum power consumption of the PowerSwitch S6010-ON?
Typical power consumption is 500W, but maximum with all ports and modules can reach up to 650W. Check the label on the power supply for exact ratings.
Can I use SFP+ optics in the QSFP+ ports?
No, the QSFP+ ports require QSFP+ form factor optics or breakout cables. However, you can use an adapter (QSFP+ to SFP+) but it is not officially supported and may affect performance.
How do I update firmware on the S6010-ON?
Download the latest OS10 image from Dell Support. Copy it to the switch via FTP/TFTP, then use the command 'install os10-image ' and reboot.
What are the recommended environmental conditions for operation?
Operate between 0°C to 40°C (32°F to 104°F) and 10% to 85% non-condensing humidity. Ensure adequate airflow and avoid dusty environments.
Does the switch support stacking?
No, the S6010-ON does not support physical stacking. However, you can use MLAG (Multi-chassis Link Aggregation) for redundancy and load balancing.
Where can I find spare parts or replacement modules?
Contact Dell authorized resellers or Dell Support. Common FRUs include power supplies (part # 0R8T6P), fan modules (part # 0N30VK), and QSFP+ optics.
User questions about PowerSwitch S6010-ON DELL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network switch in PDF format for free! Find your manual PowerSwitch S6010-ON - DELL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PowerSwitch S6010-ON by DELL.
USER MANUAL PowerSwitch S6010-ON DELL
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : DELL
Model : PowerSwitch S6010-ON
Category : Network switch