PowerConnect B-8000 - Uncategorized DELL - Free user manual and instructions
Find the device manual for free PowerConnect B-8000 DELL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Switch |
| Brand | Dell |
| Model | PowerConnect B-8000 |
| Form Factor | Rack-mountable, 1U |
| Ports | 48 x Gigabit Ethernet (10/100/1000) + 4 x 10 Gigabit SFP+ uplink |
| Switching Capacity | 176 Gbps |
| Forwarding Rate | 130.9 Mpps |
| MAC Address Table Size | 32K entries |
| Dimensions (W x D x H) | 44.0 cm x 30.0 cm x 4.4 cm (17.3 in x 11.8 in x 1.7 in) |
| Weight | Approximately 6.5 kg (14.3 lbs) |
| Power Supply | Internal, 100-240 VAC, 50-60 Hz, redundant hot-swappable |
| Power Consumption | 120W (maximum) |
| Cooling | Variable speed fans, front-to-back airflow |
| Management | Web GUI, CLI (SSH/Telnet), SNMP, RMON, Telnet |
| VLAN Support | Up to 4094 VLANs, 802.1Q tagging |
| Security Features | 802.1X, ACL, port security, DHCP snooping, ARP inspection |
| Quality of Service (QoS) | 802.1p, DSCP, strict priority and weighted round robin |
| Layer 3 Features | Static routing, RIP, OSPF, VRRP |
| Installation | Rack mount brackets included, quick setup guide |
| Environment | Operating temperature: 0°C to 45°C; Humidity: 10% to 90% non-condensing |
Frequently Asked Questions - PowerConnect B-8000 DELL
How do I factory reset the Dell PowerConnect B-8000 switch?
Press and hold the Reset button on the front panel while powering on the device. Hold for 10 seconds until the system LEDs flash. This restores factory defaults.
What is the default IP address and login credentials?
Default IP is 192.168.0.254 with username admin and password password (or blank). Check the product label or manual for exact values.
How to configure VLANs on this switch?
Access the Web GUI or CLI. In CLI, use commands like
vlan database and vlan . Assign ports with switchport access vlan .Can I use SFP+ modules for 10Gb connectivity?
Yes, the switch has 4 SFP+ ports that support 10 Gigabit Ethernet. Ensure you use compatible Dell qualified modules.
How to update the firmware?
Download the latest firmware from Dell Support. Upload via TFTP or HTTP in the firmware management section. The switch will reboot after update.
What is the maximum power consumption?
The maximum power consumption is 120W. Actual power depends on port usage and module installation.
How to troubleshoot network connectivity issues?
Check link LEDs on ports. Use
show interfaces status in CLI. Verify cable integrity and that devices are in the same VLAN. Use ping and traceroute.Does the switch support stacking?
This model typically does not support stacking. It is a standalone switch. For stacking, consider other PowerConnect models.
How to set up port mirroring?
Use the command
monitor session 1 source interface both and monitor session 1 destination interface in global config.What are the warranty and support options?
Comes with a limited lifetime hardware warranty. Advanced replacement available with Dell ProSupport. Phone and online support via Dell website.
User questions about PowerConnect B-8000 DELL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual PowerConnect B-8000 - DELL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PowerConnect B-8000 by DELL.
USER MANUAL PowerConnect B-8000 DELL
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : DELL
Model : PowerConnect B-8000
Category : Uncategorized