BA-ST 9022-2FE - Water heaters and boilers Nibe - Free user manual and instructions
Find the device manual for free BA-ST 9022-2FE Nibe in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electric storage water heater |
| Brand | Nibe |
| Model | BA-ST 9022-2FE |
| Capacity | 90 liters (approximate) |
| Dimensions (Height × Diameter) | 1100 mm × 500 mm |
| Weight (empty) | 30 kg |
| Power Supply | AC 230 V, 50 Hz |
| Nominal Power | 2.0 kW |
| Energy Efficiency Class | C (typical for electric storage) |
| Standby Loss | 0.7 kWh/24h |
| Max Water Temperature | 75°C |
| Safety Valve | Included (pressure relief) |
| Thermostat | Adjustable, 30-75°C |
| Anode | Magnesium anode for corrosion protection |
| Insulation | Polyurethane foam, 50 mm |
| Installation | Wall-mounted or floor-standing |
| Maintenance | Annual anode check and replacement if needed |
| Cleaning | Descaling every 2-3 years depending on water hardness |
| Safety Features | Overheat protection, dry-run protection |
| Spare Parts Availability | Thermostat, heating element, anode available via Nibe support |
Frequently Asked Questions - BA-ST 9022-2FE Nibe
How do I install the Nibe BA-ST 9022-2FE water heater?
Installation must be performed by a qualified professional. Ensure the unit is mounted on a wall capable of supporting at least 30 kg empty. Connect to cold water supply and electrical outlet (230V). Include a safety valve as per local regulations.
What is the maximum temperature setting?
The thermostat can be adjusted from 30°C to a maximum of 75°C. For optimal energy savings and to prevent scalding, we recommend setting it to 60°C.
How do I maintain the anode?
The magnesium anode should be inspected annually. If less than 10 mm thick or heavily corroded, replace it. This protects the tank from corrosion.
Can I install this water heater outdoors?
No, the BA-ST 9022-2FE is designed for indoor use only, in a dry, frost-free location. Outdoor installation may void the warranty.
How do I descale the unit?
Descaling can be done by a professional using a descaling solution. Flush the tank every 2-3 years or more often if water is hard. Follow the manual instructions.
What does the safety valve do?
The safety valve relieves excess pressure if the water temperature exceeds safe limits. It is essential for safe operation; ensure it is not blocked.
How do I reset the overheat protection?
If the overheat protection activates, press the reset button located on the thermostat. If it trips repeatedly, contact a serviceman.
What spare parts are available for this model?
Common spare parts include the heating element, thermostat, safety valve, and anode. Order from Nibe authorized dealers.
How long does it take to heat up the full tank?
With a 90-liter tank and 2.0 kW heating element, the initial heat-up time from 15°C to 60°C is approximately 2.5 hours.
Does this model have any energy-saving features?
The unit has good foam insulation to reduce standby losses. For additional savings, set the thermostat to 60°C and use a timer if available.
User questions about BA-ST 9022-2FE Nibe
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water heaters and boilers in PDF format for free! Find your manual BA-ST 9022-2FE - Nibe and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BA-ST 9022-2FE by Nibe.
USER MANUAL BA-ST 9022-2FE Nibe
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Nibe
Model : BA-ST 9022-2FE
Category : Water heaters and boilers