K7300 - Battery charger VELLEMAN - Free user manual and instructions
Find the device manual for free K7300 VELLEMAN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Battery Charger |
| Brand | Velleman |
| Model | K7300 |
| Compatible Battery Types | NiCd, NiMH (AA, AAA) |
| Number of Charging Slots | 4 |
| Charging Current | Approx. 200 mA per channel |
| Input Voltage | 230 V AC, 50 Hz |
| Power Consumption | 5 W |
| Dimensions (L x W x H) | 150 x 80 x 50 mm |
| Weight | 200 g |
| Protection Features | Overcharge protection, reverse polarity protection |
| Indicator | LED per channel (charging/ready) |
| Charging Modes | Automatic trickle charge after full charge |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Maintenance | Clean with dry cloth; do not use solvents |
| Safety Certifications | CE marked |
| Spare Parts Availability | Not applicable (no user-serviceable parts) |
Frequently Asked Questions - K7300 VELLEMAN
What types of batteries can I charge with the Velleman K7300?
The Velleman K7300 is designed for NiCd and NiMH rechargeable batteries in AAA and AA sizes.
How many batteries can I charge at once?
The charger has 4 independent slots, allowing you to charge up to 4 batteries simultaneously.
Does the charger automatically stop when batteries are full?
Yes, the K7300 features automatic overcharge protection and switches to a trickle charge once batteries are fully charged.
What does the LED indicator mean?
A red LED indicates charging is in progress, while a green LED means the battery is fully charged and ready to use.
Can I charge alkaline batteries?
No, this charger is only for rechargeable NiCd/NiMH batteries. Do not attempt to charge alkaline batteries, as it may cause leakage or damage.
What is the charging current per slot?
The charging current is approximately 200 mA per battery, suitable for standard NiCd/NiMH cells.
How long does it take to charge a typical 2000 mAh AA battery?
Approximately 10-12 hours for a fully discharged battery, depending on the actual capacity and state of charge.
Is the K7300 suitable for lithium-ion batteries?
No, the K7300 is specifically designed for NiCd and NiMH chemistries only. Do not use it with Li-ion or other battery types.
What should I do if the charger gets hot during use?
Some warmth is normal during charging. However, if it becomes excessively hot, disconnect immediately and allow it to cool. Check for proper ventilation and ensure you are using compatible batteries.
Can I leave batteries in the charger after charging?
It is safe to leave them for a short period as the charger switches to trickle charge mode. However, it is recommended to remove batteries once fully charged to prolong battery life.
User questions about K7300 VELLEMAN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Battery charger in PDF format for free! Find your manual K7300 - VELLEMAN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. K7300 by VELLEMAN.
USER MANUAL K7300 VELLEMAN
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : VELLEMAN
Model : K7300
Category : Battery charger