58G011 - Saw Graphite - Free user manual and instructions
Find the device manual for free 58G011 Graphite in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Circular Saw |
| Brand | Graphite |
| Model | 58G011 |
| Category | Electric Saw |
| Power Source | Mains Electric |
| Rated Voltage | 230 V ~ 50 Hz |
| Power Consumption | 1200 W |
| Dimensions (L x W x H) | 300 x 200 x 150 mm |
| Weight | 2.5 kg |
| Blade Diameter | 160 mm |
| Max Cutting Depth at 90° | 55 mm |
| Max Cutting Depth at 45° | 40 mm |
| Depth Adjustment | Yes, tool-free |
| Angle Adjustment | 0° to 45° |
| Safety Device | Retractable blade guard, double safety switch |
| Dust Blower | Yes, built-in |
| Maintenance | Clean after use, lubricate moving parts |
| Cleaning | With a dry cloth, do not use water |
| Spare Parts Available | Blades, carbon brushes, adjustment screws |
| Included Accessories | Saw blade, tightening wrench, parallel guide |
| Warranty | 2 years |
Frequently Asked Questions - 58G011 Graphite
How do I change the saw blade?
Unplug the saw, press the arbor lock button, loosen the central screw with the provided wrench, remove the old blade and install the new one respecting the rotation direction. Tighten the screw and check the lock.
How do I adjust the cutting depth?
Loosen the depth adjustment lever, adjust the base plate to the desired depth visible on the scale, then retighten the lever. Make sure the screw does not exceed the material thickness.
What is the power supply voltage?
The saw operates on a voltage of 230 V ~ 50 Hz. Use an appropriate socket and a cable in good condition.
Can this saw cut metal?
Yes, with a blade suitable for metal (fine tooth). Set the speed to the recommended position for metal and wear protective equipment.
How do I clean the saw?
Unplug the saw. Use a dry cloth or soft brush to remove wood dust. Do not use water or corrosive solvents. Clean the ventilation slots regularly.
What are the safety precautions?
Wear safety glasses, gloves, and a dust mask. Do not wear loose clothing. Keep the work area clear. Use the parallel guide for straight cuts.
How do I replace the carbon brushes?
Unplug the saw. Remove the caps of the brush holders, take out the worn brushes and insert new ones. Replace the caps. If the brushes wear quickly, consult after-sales service.
The saw makes an abnormal noise, what should I do?
Check that the blade is not damaged or loose. Inspect screws and fasteners. If the noise persists, the bearings or motor may be defective; contact customer service.
How do I adjust the cutting angle?
Loosen the angle adjustment knob under the base plate, tilt the saw head to the desired angle (0° to 45°), then retighten the knob. Use a square to check accuracy.
Where can I find the user manual?
The manual is available for free download in PDF format on the site notice-facile.com for French and other languages.
User questions about 58G011 Graphite
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Saw in PDF format for free! Find your manual 58G011 - Graphite and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 58G011 by Graphite.
USER MANUAL 58G011 Graphite
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Graphite
Model : 58G011
Category : Saw