CDI4601V - Dishwasher Elvita - Free user manual and instructions

Product Type	Built-in Dishwasher
Brand	Elvita
Model	CDI4601V
Place Settings	12
Dimensions (H x W x D)	845 x 450 x 600 mm
Weight	40 kg
Power Supply	220-240 V, 50 Hz, 10 A
Energy Efficiency Class	A++
Annual Energy Consumption	260 kWh
Water Consumption per Cycle	9.5 L
Noise Level	44 dB(A) re 1 pW
Number of Programs	6
Programs	Eco, Intensive, Normal, Quick, Rinse, Auto
Drying System	Condensation
Water Connection	Cold water only
Adjustable Water Softener	Yes
Salt and Rinse Aid Indicators	Yes
Delay Start	Up to 24 hours
Child Lock	Yes
Interior Light	Yes
Cutlery Basket	Yes, removable
Adjustable Upper Basket	Yes, height adjustable
Removable Lower Spray Arm	Yes
Self-Cleaning Filter	Yes
Warranty	2 years

Frequently Asked Questions - CDI4601V Elvita

How do I install the Elvita CDI4601V dishwasher?

Installation should be done by a qualified technician. Ensure the water supply and drainage are correctly connected. The dishwasher is designed for built-in installation under a countertop. Refer to the manual for detailed steps.

What detergents can I use in this dishwasher?

Use standard dishwasher detergents (powder, gel, or tablets) along with rinse aid and salt for optimal results. Do not use hand dishwashing liquid as it causes excessive suds.

How many place settings does the CDI4601V hold?

It holds up to 12 place settings, making it suitable for medium-sized households.

What programs are available?

The dishwasher offers 6 programs: Eco, Intensive, Normal, Quick, Rinse, and Auto. Choose based on soil level and time available.

How do I clean and maintain the dishwasher?

Clean the filter regularly (after every few cycles) under running water. Wipe the door seals and spray arms. Use a dishwasher cleaner monthly to remove limescale and grease.

The dishwasher is not cleaning properly. What should I check?

Check that spray arms are not clogged, filters are clean, and you have enough detergent/rinse aid. Ensure dishes are not blocking the spray arms. Also verify water supply is on.

Can I use the delay start feature?

Yes, the delay start allows you to postpone the cycle start by up to 24 hours. Press the delay button and select the desired delay time.

How do I activate the child lock?

Press and hold the Child Lock button (marked with a padlock icon) for 3 seconds to lock the panel. Repeat to unlock.

What should I do if the dishwasher displays an error code?

Refer to the manual for error code meanings. Common issues include water inlet blockage, drainage problems, or overheating. Reset by turning off the power for 30 seconds.

Where can I download the user manual?

The user manual is available for free download on notice-facile.com in multiple languages. Visit the product page for the Elvita CDI4601V.

USER MANUAL CDI4601V Elvita

You can find the latest updated manual online. Please go to elvita.se and use the search function and the product's model code to find the manual.

CONTENTS/INHALT/INNEHÅLL/INNHOLD/INDHOLD/SISÄLLYSLUETTELO/EFNISYFIRLIT

ENGLISH 2

DEUTSCH....52

SVENSKA 102

NORSK....150

DANSK....198

SUOMI 246

ÍSLENSKA 294

Contents

SAFETY 5

Admonitions 5

Intended use 5

Safety for children and people with disabilities.... 5

General safety 6

Safety during installation 6

Safety during operation 7

Safety during maintenance 8

Disposal....9

QUICK START 10

GETTING STARTED 12

Getting to know your dishwasher.... 12

Controls.... 12

Symbols on the display 12

Detergent dispenser and rinse aid dispenser 12

Accessories.... 13

Find the model code.... 13

Before first use 13

Adjust the water softener level 14

Run an empty load.... 14

WASHING 15

Before each wash 15

Start washing 15

Add dishes during a wash 15

Change programme during a wash 16

Purpose of detergent 16

Fill the detergent dispenser.... 16

Purpose of rinse aid 17

Fill the rinse aid dispenser.... 17

Adjust the rinse aid consumption 18

Purpose of salt for the water softener 18

Add salt to the water softener 18

After each wash.... 19

Items suitable for use in dishwasher 20

Adjusting baskets and racks before loading 20

Adjust the height of the upper basket.... 20

Fold up and fold down the cup rack 21

Fold back the plate racks 21

Loading the dishwasher efficiently 21

Guidelines for loading the upper basket 22

Guidelines for loading the lower basket 22

Guidelines for loading the cutlery rack.... 23

Guidelines for loading the cutlery basket 24

Options, settings and functions.... 25

Use the Extra drying option 25

Use the Half load option 26

Use the Delay function 26

Programmes.... 26

90 min.... 26

ECO 26

Glass 27

Intensive 27

Rapid 28

Universal 28

CLEANING 29

Clean the door and door seals 29

Clean the spray arms.... 30

Remove and clean the filtering system.... 30

Prepare for longer periods of non-use 31

TROUBLESHOOTING 33

The machine does not start 33

Water is not pumped out of dishwasher 33

Residue, deposits and stains.... 33

Suds in the tub 33

Stained dishwasher interior 34

White film on inside surface.... 34

Detergent left in dispenser.... 34

Noises.... 34

Knocking noise in the dishwasher 34

Rattling noise in the dishwasher 34

Knocking noise in the water pipes 34

Dirty dishes.... 34

The dishes are not clean.... 34

Cloudiness on glassware.... 35

There are rust stains on the cutlery 35

White spots appear on dishes and glasses 35

Black or grey marks on dishes 35

The dishes are not drying 35

Error messages.... 36

The E1 error code is displayed 36

The E3 error code is displayed.... 36

The E4 error code is displayed.... 36

The Ed error code is displayed 37

INSTALLATION 38

Unpack the machine.... 38

Connect the cold-water supply hose to a tap 39

Connect the safety supply hose to a tap 40

Connect to an external drain 40

Position the drain hose into a floor drain 41

Connect the drain hose to a sink drain pipe.... 41

Position the drain hose into a sink 41

Connecting to the electrical supply.... 41

Position the machine.... 42

Install the wooden door panel.... 43

Fit the condensation strip.... 44

Change to the longer feet.... 44

Level the machine 45

Adjust the door spring tension.... 45

Secure the machine in place - for normal work surfaces.... 46

Secure the machine in place - for marble or granite surfaces.... 46

SPECIFICATIONS 48

Technical specifications.... 48

Dimensions.... 49

Consumption values.... 49

EU directives and standards.... 49

SAFETY

Carefully read the instructions before you install and use the product. Save the instructions and keep them near the product for future reference. All kinds of warranties shall be invalid if these instructions are not followed.

Admonitions

DANGER!

Used when there is a risk for personal injury or death.

WARNING!

Used when there is a risk for personal injury.

CAUTION!

Used when there is a risk for damage to the product.

NOTE!

General information that you should be aware of.

Helpful tips that you may find useful.

Intended use

This product is only intended for indoor use in a household or a household environment such as:

• staff kitchen areas in shops, offices and other working environments;
• farm houses;
• by clients in hotels, motels and other residential type environments;
• bed and breakfast type environments.

Safety for children and people with disabilities

WARNING!

Only let the following groups use the product if they are supervised or if instructions are provided to them about how to use the product in a safe way. They must understand the hazards involved.

• Children 8 years and older. (Children younger than 8 years must be continuously supervised, or be kept away from the product.)
• People with reduced physical, sensory or mental capabilities.
• People with a lack of experience and knowledge.

WARNING!

• Do not let children play with the product.
• Do not let children clean the product without supervision.

WARNING!

Remove the packaging material, as it can be dangerous for children.

WARNING!

Keep dishwasher detergent out of the reach of children. Dishwasher detergent is corrosive.

General safety

WARNING!

• Installation and repair must only be carried out by a qualified technician. - Some dishwasher detergents are strongly alkaline. They can be extremely dangerous if swallowed. Avoid contact with the skin and eyes and keep children away from the dishwasher when the door is open. - If an overflow occurs, turn off the main water supply before calling for service. - If there is water in the base of the dishwasher due to overfilling or a small leak, the water should be removed before restarting the dishwasher. - Do not place any heavy objects on, or stand on, the door when it is open. The product could tip forward.

WARNING!

Do not leave the door in the open position since this could present a tripping hazard.

WARNING!

Risk of electric shock!

• Disconnect electrical power before installing the dishwasher. Failure to do so could result in death or electrical shock.
• Do not immerse the unit, power cord, or plug in water or other liquid.
• This product must be earthed. In the event of a malfunction or breakdown, earthing will reduce the risk of an electric shock by providing a path of least resistance for electric current. This product is equipped with a plug with an earthing conductor.

CAUTION!

• Do not wash plastic items unless they are marked "dishwasher safe" or the equivalent. For plastic items that do not have this marking, check the manufacturer's recommendations.
• Use only detergent and rinse agents recommended for use in a dishwasher.
• Never use soap, laundry detergent, or hand washing detergent in your dishwasher.
• Do not abuse, sit on, or stand on the door or dish rack of the dishwasher.
• Do not tamper with the controls when loading items to be washed.

Safety during installation

WARNING!

• Electrical equipment must be installed by professionals.
• Hoses should be installed by professionals.

WARNING!

Risk for electric shock!

• Disconnect electrical power before installing the product. Failure to do so could result in death or electrical shock.
• The plug must be plugged into an appropriate power socket that is installed and earthed in accordance with all local laws and regulations.
• Improper connection of the earthing conductor can result in the risk of an electric shock.
• Check with a qualified electrician or service representative if you are in doubt whether the product is properly earthed.
• Do not modify the plug provided with the product if it does not fit the power socket.
• Have a proper power socket installed by a qualified electrician.
• Ensure the dishwasher is correctly earthed before use.
• Do not use an extension cord or an adapter plug with this product.
• Do not, under any circumstances, cut or remove the earthing connection from the power cord. • Take care to avoid kinking or crushing the power cord.

CAUTION!

• Do not install or store the product in environments where the temperature falls below 0 °C.
• The inlet water pressure must be between 0.04 MPa and 1 MPa.
• The product must be connected to the water supply using new hoses. Do not reuse old hoses.
• If the water pipes are new or have not been used for an extended period of time, let the water run to make sure that the water is clear. This precaution is necessary to avoid the risk of the water inlet becoming blocked and damaging the product.
• If your sink has a spray jet fed by a hose that is connected to the same water line as the dishwasher, the safety supply hose could burst. If your sink has one, it is recommended that the safety supply hose is disconnected and the hole plugged.

CAUTION!

The product must not be tilted more than 2 degrees.

Safety during operation

WARNING!

Do not operate your dishwasher unless all enclosure panels are properly in place.

WARNING!

• Do not let any item stick through the basket bottom.
• Knives and other utensils with sharp points must be loaded in the basket with their points facing down or placed in a horizontal position.

WARNING!

Keep dishwasher detergent out of the reach of children. Dishwasher detergent is corrosive.

WARNING!

• It is dangerous to open the door mid-programme, as hot steam may scald you.
• Open the door very carefully if the dishwasher is operating. There is a risk of water squirting out.
• When removing dishes, items will be hot. Wait 15 minutes after the programme has ended before removing glass or cutlery.

CAUTION!

If the water pipes are new or have not been used for an extended period of time, let the water run to make sure that the water is clear. This precaution is necessary to avoid the risk of the water inlet becoming blocked and damaging the product.

CAUTION!

• After each wash, check that the detergent dispenser is empty and that the detergent has been dissolved. - Only use detergent that is specifically intended for dishwasher use. Keep your detergent fresh and dry. - Do not put powdered detergent into the dispenser until you are ready to wash dishes. - Only use branded rinse aid that is formulated for dishwashers. Never fill the rinse aid dispenser with any other substances (e.g. dishwasher cleaning agent, liquid detergent). This would damage the product. - Only use salt specifically designed for dishwasher use. Any other type of salt that is not specifically designed for dishwasher use, especially table salt, will damage the water softener. The manufacturer's warranty does not cover any damage that results from the use of unsuitable salt. - Only fill with salt before running a cycle. This will prevent any grains of salt or salty water that may have been spilled from remaining on the bottom of the machine for any period of time, which may cause corrosion.

CAUTION!

• When cleaning the filters, do not over-tighten the filters. Refit the filters securely in the correct order, otherwise coarse debris could get into the system and cause a blockage.
• Never use the dishwasher without the filters in place. Incorrect replacement of the filters may reduce the performance of the product and damage dishes and utensils.

CAUTION!

Place sharp items so that they are not likely to damage the door seal.

Washing dishes using this dishwasher consumes less energy and water than doing it by hand, provided that you use the machine for household purposes and follow the instructions in this manual.

Safety during maintenance

WARNING!

• Installation and repair must only be carried out by a qualified technician. - Any repair performed by someone who is not a qualified technician puts the users of the product at risk of personal injury. - Any warranty claim resulting from repairs performed by someone who is not a qualified technician shall not be covered by the warranty. - If the power cord is damaged, it must be replaced by the manufacturer, the manufacturer's service agent or a similarly qualified person in order to avoid a hazard.

WARNING!

Disconnect the product from the mains before cleaning and carrying out maintenance on the product.

CAUTION!

• To avoid penetration of water into the door lock and electrical components, do not use a spray cleaner of any kind.
• Do not use solvents or abrasive cleaning products to clean the exterior and rubber parts of the dishwasher.
• Never use abrasive cleaners or scouring pads on the outer surfaces, as they may scratch the finish. Some paper towels may also scratch or leave marks on the surface.

CAUTION!

• When cleaning the filters, do not over-tighten the filters. Refit the filters securely in the correct order, otherwise coarse debris could get into the system and cause a blockage.
• Never use the dishwasher without the filters in place. Incorrect replacement of the filters may reduce the performance of the product and damage dishes and utensils.

Disposal

Before you dispose of the product, cut off the power cord and ensure that the door lock is disabled.

Dispose of packaging in an environmentally-friendly manner. Recycling packaging, while observing national and local regulations, can reduce the consumption of raw materials and the amount of waste in landfill sites.

This product is marked in compliance with European Directive 2012/19/EU, Waste Electrical and Electronic Equipment (WEEE). The symbol on the product or on its packaging indicates that this product should not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.

By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact the relevant municipal body in charge of waste management, your household waste disposal service or the store where you purchased the product.

QUICK START

Before washing

Washing 1

●

●

After washing 1

●

●

4

5

GETTING STARTED

Getting to know your dishwasher

Controls

A. Programme indicator lights B. Warning indicator lights C. Display D. Options, settings, and functions E. Programme selector F. On/Off

Symbols on the display

Intensive Universal ECO Extra drying

Rinse aid

Glass

90 min

Rapid

Half load

Salt

Detergent dispenser and rinse aid dispenser

A. Detergent dispenser B. Rinse aid dispenser

WARNING!

Do not use soap, laundry detergent, or hand washing detergent in your dishwasher. Only use detergent and rinse aid that is specifically intended for dishwasher use.

Accessories

A. Safety supply hose B. Drain hose holder C. Salt funnel D. Longer feet

Safety supply hose For connecting the dishwasher to the water supply.

Drain hose holder

For securing the hose and avoiding kinks, for example when placing the hose over the edge of a sink.

Salt funnel: For adding salt to the water softener.

Longer feet: For increasing the height of the machine.

Find the model code

The model code is printed on a label on the product. You need the code to find the complete and most recent information, service, and support for your product model.

NOTE!

This product and label text are examples. Your product and text may have a different look and content.

Before first use

CAUTION!

Before washing, make sure the dishwasher is correctly installed.

You need to add salt to the water softener to remove minerals and salts from the water that would have an adverse effect on the operation of the dishwasher. See section "Add salt to the water softener", page 18.

Adjust the water softener level

Set the water softener level according to the hardness of the water in your area. See the following table to select the appropriate level. Your local water authority can advise you on the local water hardness.

Water hardness Water softenerGerman °dH French °fH British °Clarke mmol/l				level	Regeneration occurrence*	Salt consumption (grams/cycle)
0 - 5 0 - 9 0 -	6 0 - 0.94 H1 is displayed No				regeneration	0
6 - 11	10 - 20	7 - 14	1.0 - 2.0	H2 is displayed	10	9
12 - 17	21 - 30	15 - 21	2.1 - 3.0	H3 is displayed	5	12
18 - 22	31 - 40	22 - 28	3.1 - 4.0	H4 is displayed	3	20
23 - 34	41 - 60	29 - 42	4.1 - 6.0	H5 is displayed	2	30
35 - 55	61 - 98	43 - 69	6.1 - 9.8	H6 is displayed	1	60

*Regeneration occurs every X programme sequence.

NOTE!

Every cycle with a regeneration operation increases the water consumption by 2.0 litres of water, the energy consumption by 0.02 kWh, and the programme duration by 4 minutes.

1. Open the door.
2. Press ⏻ to turn on the machine.
3. Within 60 seconds, press and hold P for more than 5 seconds to enter the water softener setup mode.
4. Press P to cycle through the available water softener levels (H1, H2, H3 (default), H4, H5, H6).
5. Press ⏻ to confirm and to exit the water softener setup mode.

You will exit the water softener setup mode if you leave the settings unchanged for 5 seconds.

Run an empty load.

Make sure that the machine is installed properly.

1. Plug in the power cord.
2. Open the water tap.
3. Start a programme.

NOTE! Do not put any dishes in the machine.

The machine is ready for use when the programme has been completed.

WASHING

Before each wash

1

2

3

1. Check if the items are dishwasher-safe. See section "Items suitable for use in dishwasher", page 20.
2. Remove scraps of leftover food.

NOTE! It is not recommended to rinse the dishes under running water. This leads to increased water and energy consumption.

1. Soften remnants of burnt food in pans by soaking them in water.

Start washing

NOTE!

To save energy, in standby mode, the dishwasher will automatically turn off if it has not been used for 15 minutes.

1. Turn on the water supply.
2. Slide out the lower and upper baskets.
3. Load the dishes.

WARNING! Knives and other utensils with sharp points must be loaded in the basket with their points facing down or placed in a horizontal position.

1. Push the lower and upper baskets back.
2. Add detergent in the detergent dispenser. See section "Fill the detergent dispenser", page 16.

NOTE! Only use detergents recommended for use in dishwasher. Never use soap, laundry detergent or hand washing detergent in the dishwasher.

1. Press to turn on the power.
2. Press the button of the desired programme.

The selected programme's indicator light is lit.

1. Select settings and options if needed.
2. Close the door to start the wash cycle.

When the washing is completed an acoustic signal sounds and the dishwasher door opens.

WARNING!

Do not empty your dishwasher immediately after washing, items will be hot. Wait for 15 minutes before emptying the dishwasher.

Add dishes during a wash

You can add more dishes to a wash any time before the detergent dispenser opens.

WARNING!

It is dangerous to open the door mid-cycle, as hot steam may scald you.

1. Open the door a little to pause the wash cycle.
2. Wait for the spray arms to stop rotating and then open the door.
3. Add the dishes.
4. Close the door.

The wash resumes after 10 seconds.

Change programme during a wash

You can change the programme any time by performing a reset.

WARNING!

It is dangerous to open the door mid-cycle, as hot steam may scald you.

1. Open the door a little to pause the wash cycle.

NOTE! After the spray arms stop rotating, you can open the door completely.

1. Press and hold for more than 3 seconds to cancel the programme.
2. Check if the detergent dispenser is open. If it is open, refill the detergent dispenser with detergent.
3. Press P to select a programme.
4. Close the door to start the wash cycle.

Purpose of detergent

The chemical ingredients in the detergent are necessary to remove, dissolve and flush all dirt out of the dishwasher. Most commercial-quality dishwasher detergents are suitable for this purpose.

Fill the detergent dispenser

CAUTION!

Only use detergent that is specifically intended for dishwasher use. Keep your detergent fresh and dry. Do not put powdered detergent into the dispenser until you are ready to wash dishes.

1

2

3

4

5

1. Open the door.
2. Slide the release catch to open the detergent dispenser.
3. The cap moves forward.
4. Add detergent for the main wash cycle to the cavity.

For better cleaning results, especially if you have very dirty items, pour a small amount of detergent onto the door. The additional detergent will be used during the pre-wash phase.

1. Slide and then press down to close the cap.

Purpose of rinse aid

Rinse aid is released during the final rinse to prevent water from forming droplets on your dishes, which can leave spots and streaks. It also improves drying by allowing water to run off the dishes. Your dishwasher is designed to use liquid rinse aids.

Fill the rinse aid dispenser

Do this when the indicator light is lit.

CAUTION!

• Only use rinse aid that is intended for dishwashers. Never fill the rinse aid dispenser with any other substances (e.g., dishwasher cleaning agent, liquid detergent). This would damage the dishwasher.
• Rinse aid that is spilled and left on the bottom of the machine may cause foaming in the next wash. If rinse aid is spilled, use an absorbent cloth to remove the spill.

1

2

3

1. Lift up the handle to open the cap.
2. Add rinse aid in the rinse aid dispenser.

CAUTION! Do not overfill the rinse aid dispenser.

1. Close the cap.

Adjust the rinse aid consumption

Set the rinse aid consumption according to the hardness of the water in your area. Your local water authority can advise you on the local water hardness. See section "Adjust the water softener level", page 14.

1. Open the door.
2. Press turn on the machine.
3. Within 60 seconds, press and hold P for more than 5 seconds.
4. Press C to enter rinse aid setup mode. The indicator light flashes once per second.
5. Press P to cycle through the available rinse aid consumption levels (D1, D2, D3 (default), D4, D5 - the higher the number, the more rinse aid the dishwasher uses).
6. Press ⚙ to confirm and exit rinse aid setup mode.

You can leave the settings unchanged for 5 seconds to exit rinse aid setup mode.

Purpose of salt for the water softener

The water softener is designed to remove minerals and salts from the water that would have an adverse effect on the operation of the dishwasher. The more minerals there are, the harder your water is. The hardness of water varies from place to place. If hard water is used in the dishwasher, deposits will form on the dishes and utensils. The type of salt that is used must be specifically designed for eliminating lime and minerals from the water.

Add salt to the water softener

Do this when the indicator light is lit.

CAUTION!

• Only use salt specifically intended for dishwasher use. Any other type of salt, especially table salt, will damage the water softener.
• Only fill with salt immediately before running a cycle. Salt or salty water that is spilled and left on the bottom of the machine for some time may cause corrosion. If salt is spilled, run the Rapid programme to remove the spill.

1

2

3

4

5

6

1. Remove the lower basket.
2. Unscrew the cap.
3. Place the end of the funnel into the hole.
4. Add about 1.5 kg of dishwasher salt.
5. Remove the funnel from the hole.
6. Fill the salt container to its maximum limit with water. (It is normal for a small amount of water to come out of the salt container).

NOTE! Only fill the salt container with water the very first time you add salt to the water softener.

1. Screw the cap back on tightly.

The indicator light is no longer lit.

NOTE! Depending on how well the salt dissolves, the indicator light may still be lit even though the salt container has been filled.

1. Immediately start a short washing programme.

CAUTION! After adding salt to the water softener you should immediately start a washing programme.

Otherwise the filter system, pump or other important parts of the machine may be damaged by salty water.

After each wash

1

2

3

4

5

1. Check that the detergent dispenser is empty.
2. Turn off the water supply.
3. Leave the door slightly open and wait for 15 minutes before removing the dishes.
4. Remove the dishes.

Empty the lower basket first and then the upper basket, to prevent water dripping.

1. Leave the door slightly open, so that moisture and odours are ventilated.

Items suitable for use in dishwasher

Before you load the dishwasher, make sure the dishes are dishwasher-safe.

The following items are not dishwasher-safe:

• Cutlery with wooden, horn, china or mother-of-pearl handles;
• Plastic items that are not heat-resistant;

CAUTION!

Check any plastic items to make sure they are marked as dishwasher safe.

• Older cutlery with glued parts that are not temperature resistant; • Bonded cutlery items or dishes;
• Pewter, tin or copper items;
• Crystal glass; • Steel items subject to rusting;
• Wooden trays and cutting boards;
• Items made from synthetic fibres.

The appearance of some items can deteriorate when used in a dishwasher:

• Some types of glasses can become dull after a large number of washes. • Silver and aluminium parts have a tendency to discolour during washing.
• Glazed patterns may fade if machine-washed frequently.

• Consider purchasing utensils that are marked as dishwasher-safe.
• Use a mild and gentle dishwasher detergent.
• Select a low-temperature programme for delicate items.

Adjusting baskets and racks before loading

Adjust the height of the upper basket

You can adjust the height of the upper basket to accommodate taller dishes in either the upper or lower basket.

1

2

3

4

1. Pull out the basket and lift the basket from the rollers.
2. To use the top position, put the basket on the upper rollers.
3. To use the bottom position, put the basket on the lower rollers.
4. Push in the basket.

Fold up and fold down the cup rack

You can fold the cup rack in the upper basket to make room for taller items.

1

2

1. Fold up the cup rack.
2. Fold down the cup rack.

With the cup rack in upright position, you can lean tall glasses against it.

Fold back the plate racks.

You can fold the plate racks in the lower basket to make room for larger items.

1. Fold back the plate racks.

Loading the dishwasher efficiently.

Use these guidelines when loading the dishwasher.

WARNING!

Long-bladed knives stored in an upright position are a potential hazard.

CAUTION!

• Place sharp items so that they are not likely to damage the door seal.
• Very small items should not be washed in the dishwasher as they could easily fall out of the basket.
• Items such as cups, glasses, pots and pans should face downwards.
• Curved items, or items with recesses, should be loaded at an angle so that water can run off.
• All utensils should be stacked securely so that they cannot tip over.
• All utensils should be placed so that they do not prevent the spray arms from rotating freely during washing.
• Load hollow items such as cups, glasses, pans, etc. upside down so that water cannot collect in the container or a deep base.
• Dishes and items of cutlery must not lie inside one another, or cover each other.

NOTE!

• Load the baskets according to the standard loading options. Aim to use all 12 place settings. This is important for good results and for the efficient use of energy and water.
• If you do not load the baskets according to the standard loading options and you do not use all the 12 place settings, it may lead to poorer performance and inefficient use of energy and water.

Guidelines for loading the upper basket

Use these guidelines together with the general guidelines when loading the upper basket.

• Load with delicate and lighter dishware such as glasses, coffee cups, tea cups and saucers, as well as plates, small bowls and shallow pans (as long as they are not too dirty).
• You can fold the cutlery rack to make room for taller items. See section "Fold up and fold down the cup rack", page 21.
• Position the items so that they will not be moved by the water spray.
• To avoid damage, glasses should not touch one another.
• Items of cutlery that are long or sharp, for example carving knives, must be laid horizontally in the upper basket.

Loading the upper basket according to European standard EN 60436

A. Cups B. Saucers C. Glasses D. Mugs E. Small pot F. Oven pot

Guidelines for loading the lower basket

Use these guidelines together with the general guidelines when loading the lower basket.

• Load with large items and the ones most difficult to clean such as pots, pans, lids, serving dishes and bowls.
• You can fold the plate racks to make room for larger items. See section "Fold back the plate racks", page 21.
• Place serving dishes and lids at the side of the racks to avoid blocking the rotation of the top spray arm.

NOTE!

The maximum recommended diameter for plates in front of the detergent dispenser is 19 cm, so that the dispenser can be opened easily.

Loading the lower basket according to European standard EN 60436

A. Glass B. Dessert dishes C. Dinner plates D. Soup plates E. Melamine dessert plates F. Melamine bowl G. Oval platter H. Glass bowl I. Cutlery basket J. Dessert bowls

Guidelines for loading the cutlery rack

Use these guidelines together with the general guidelines when loading the cutlery rack.

WARNING!

• Do not let any item stick through the basket bottom. • Always load sharp utensils with the sharp point down.

CAUTION!

Only place light cutlery on the rack. The total weight should be less than 1.5 kg.

Cutlery should be placed separately from each other and in the appropriate positions, making sure that the utensils do not nest together, as this could impair the cleaning performance.

Loading the cutlery rack according to European standard EN 60436

A. Soup spoons B. Forks C. Knives D. Teaspoons E. Dessert spoons F. Serving spoons G. Serving forks H. Gravy ladles

Guidelines for loading the cutlery basket

Use these guidelines together with the general guidelines when loading the cutlery basket.

WARNING!

• Do not let any item stick through the basket bottom. • Always load sharp utensils with the sharp point down.

Cutlery should be placed separately from each other and in the appropriate positions, making sure that the utensils do not nest together, as this could impair the cleaning performance.

Loading the cutlery rack according to European standard EN 60436

A. Soup spoons B. Forks C. Knives D. Teaspoons E. Dessert spoons F. Serving spoons G. Serving forks H. Gravy ladles

Options, settings and functions

Auto open

Opens the dishwasher door automatically at the end of the programme. This improves the drying results. This function is always active and cannot be turned off.

Delay

Delays the start of the washing programme by a specified amount of time. Maximum delay time is 24 hours.

Extra drying

Gives the dishes an extra thorough drying.

Half load

Saves energy and water. Can be used when half or less than half of the dishwasher's place settings are being used.

Use the Extra drying option

This option is not available with the programme Rapid.

1. Press ☐ select a programme.
2. Press
3. Close the door.

Use the Half load option

This option can be used to save water and energy when half or less than half of the dishwasher's place settings are being used. This option is not available with the programmes 90 min and Rapid.

1. Press P to select a programme.
2. Press 1/2.
3. Close the door.

Use the Delay function.

1. Press ⬆ to select a programme.
2. Change settings and select options if needed.
3. Press to cycle through the available delay times.
4. Close the door.

The washing cycle will start after the delay time has passed.

You can cancel the delay timer by pressing to cycle through the available delay times until the display shows 00.

Programmes

NOTE!

• The amount of dishwasher detergent needed depends on how dirty the dishes are.
• Actual values for a programme may differ from the values presented here. The values given for programmes other than the ECO programme are indicative only.

90 min

For normally soiled loads that need a quick wash.

Cycle steps • Wash 55 °C	• Rinse• Rinse 50 °CDrying
Detergent, pre-wash	-
Detergent, main wash	20 g or 1 - 2 tablets
Default time	1:30
Rinse aid	Yes
Auto open	Yes, 10 minutes before the programme ends

ECO

The recommended programme for normally soiled dishes, since it reduces the consumption of energy and water.

Cycle steps • Wash 50 °C	• Rinse• Rinse 50 °CDrying
Detergent, pre-wash 4 g
Detergent, main wash 20 g or 1	- 2 tablets
Default time 3:18
Rinse aid Yes
Auto open Yes, 40 minutes before the programme ends

Glass

For lightly soiled crockery and glass.

Cycle steps • Pre-wash 40 °C	• Wash 50 °C• Rinse• Rinse 50 °CDrying
Detergent, pre-wash 4 g
Detergent, main wash 16 g or 1	- 2 tablets
Default time 2:00
Rinse aid Yes
Auto open Yes, 15 minutes before theprogramme ends

Intensive

For heavily soiled crockery and normally soiled pots, pans, dishes, etc., with dried-on food.

Cycle steps • Pre-wash 50 °C	• Wash 65 °C• Rinse• Rinse• Rinse 60 °CDrying
Detergent, pre-wash 4 g
Detergent, main wash 16 g or 1Default time 3:25	- 2 tablets
Rinse aid Yes
Auto open Yes, 10 minutes before the programme ends

Rapid

A quicker programme for lightly soiled loads that do not need drying.

Cycle steps • Wash 40 °C	• Rinse 40 °C• Rinse 55 °C
Detergent, pre-wash -
Detergent, main wash 12 g or 1 tablet
Default time 0:30
Rinse aid No
Auto open No

Universal

For normally soiled loads, such as pots, plates, glasses, and lightly soiled pans.

Cycle steps • Pre-wash 45 °C	• Wash 55 °C• Rinse• Rinse• Rinse 60 °C• Drying
Detergent, pre-wash 4 g
Detergent, main wash 16 g or 1	- 2 tablets
Default time 2:55
Rinse aid Yes
Auto open Yes, 20 minutes before the programme ends

CLEANING

Correct maintenance of your product can extend its working life.

WARNING!

Before cleaning or maintenance of this product, read the safety information and the full instructions.

WARNING!

Unplug the machine before cleaning and carrying out maintenance.

CAUTION!

• If cleaning is required, only use a soft damp cloth moistened with mild soap. Use a dry cloth to wipe the machine dry.
• To remove spots or stains from the interior surface, use a cloth dampened with water and a little vinegar, or a cleaning product made specifically for dishwashers.

CAUTION!

• To avoid penetration of water into the door lock and electrical components, do not use a spray cleaner of any kind.
• Never use abrasive cleaners or scouring pads on the outer surfaces, as they may scratch the finish. Some paper towels may also scratch or leave marks on the surface.

Clean the door and door seals

Do this regularly to remove food residue.

CAUTION!

Do not use solvents or abrasive cleaning products to clean the exterior and rubber parts of the dishwasher. Use a cloth moistened with warm soapy water.

1

2

3

4

5

1. Open the door.
2. Clean the door seals with a soft, damp cloth.
3. Clean the sides of the door and clean the control panel with a soft, damp cloth. Wipe the control panel thoroughly dry.
4. Close the door.
5. Clean the front of the door.

Clean the spray arms

Do this regularly. This prevents the spray arms and bearings from getting clogged.

1

2

3

4

5

6

1. Remove the upper basket.
2. To remove the upper spray arm, hold the nut still and rotate the spray arm.
3. Remove the lower basket.
4. To remove the lower spray arm, pull the spray arm upward.
5. Wash the 2 spray arms in warm, soapy water.
6. Clean the jets using a soft brush.

Install in reverse order.

Remove and clean the filtering system

Check the filters regularly and clean them when debris has started to accumulate. This prevents the filters from getting clogged.

CAUTION!

• Refit the filters securely in the correct order, otherwise coarse debris could get into the system and cause a blockage.
• Never use the dishwasher without the filters in place. Incorrect replacement of the filters may reduce the performance of the dishwasher and damage dishes and utensils.

1

2

3

4

5

6

7

8

9

1. Remove the lower basket.
2. Rotate the coarse filter.
3. Lift and remove the filter assembly.
4. Pull the fine filter off the filter assembly: gently squeeze the tabs at the top and pull the coarse filter off the filter assembly.
5. Remove large food remnants by rinsing the filter under running water.

For a more thorough cleaning, use a soft cleaning brush.

1. Reassemble the filters in the reverse order.
2. Put the filter assembly in its initial position.
3. Rotate the coarse filter.

CAUTION! Do not over-tighten the filters.

1. Put back the lower basket.

Prepare for longer periods of non-use

Do this when the dishwasher will not be used for a long time.

1

2

3

4

1. Run a wash cycle with the dishwasher empty.
2. Unplug the plug from the power socket.
3. Turn off the water supply.
4. Open the door slightly.

NOTE! Leaving the door slightly open helps the door seals to last longer and prevent odours from forming within the dishwasher.

TROUBLESHOOTING

The machine does not start

The problem can have different causes. Follow the instructions for the suggested causes to solve the problem.

Fuse has blown, or circuit breaker has tripped

• Replace the fuse or reset the circuit breaker.
• Disconnect any other appliances connected to the same circuit as the dishwasher.

Machine is not connected to the power supply

Connect the power cord to the power outlet.

Machine is not turned on

Turn on the machine.

Water pressure is low

1. Check that the water supply is connected properly.
2. Check that the water is turned on.

Door of dishwasher not properly closed

Close the door properly and latch it.

Water is not pumped out of dishwasher

The problem can have different causes. Follow the instructions for the suggested causes to solve the problem.

Twisted, trapped or clogged drain hose

Check the drain hose.

Filter clogged

Check the coarse filter.

Kitchen sink clogged

Check the kitchen sink to make sure it is draining well. If the problem is due to a blocked kitchen sink, you may need to call a plumber rather than a dishwasher service technician.

Residue, deposits and stains

Suds in the tub

The problem can have different causes. Follow the instructions for the suggested causes to solve the problem.

Wrong detergent

1. Run the Rapid programme without any dishes.
2. Check for suds and repeat if needed.

Spilled rinse aid

Always wipe up rinse aid spills immediately.

Stained dishwasher interior

Detergent with colourant may have been used

Make sure that the detergent does not contain any colourant.

White film on inside surface

Hard water deposits

1. Clean the interior.
2. Use a damp sponge with dishwasher detergent and wear rubber gloves.

Detergent left in dispenser

Dishes are blocking detergent dispenser

Re-load the dishes properly.

Noises

Knocking noise in the dishwasher

A spray arm is knocking against an item in a basket

1. Pause the programme.
2. Rearrange the items that are obstructing the spray arm.

Rattling noise in the dishwasher

Items of crockery are loose in the dishwasher

Pause the programme and rearrange the items of crockery.

Knocking noise in the water pipes

This may be caused by on-site installation or the cross-section of the piping

This has no effect on the operation of the dishwasher. If in doubt, contact a qualified plumber.

Dirty dishes

The dishes are not clean

The problem can have different causes. Follow the instructions for the suggested causes to solve the problem.

The dishes were not loaded correctly

See section "Loading the dishwasher efficiently", page 21.

The programme was not powerful enough

Select a more vigorous programme.

Wrong detergent was used

Use more detergent, or change your detergent.

Items are blocking the movement of the spray arms

Rearrange the items so that the spray arms can rotate freely.

The filter assembly is not clean or is not correctly fitted in the base of the dishwasher cabinet

This may lead to blockage of the spray arm jets.

• Clean and fit the filter correctly. See section "Remove and clean the filtering system", page 30.
• Clean the spray arm jets. See section "Clean the spray arms", page 30.

Cloudiness on glassware

Combination of soft water and too much detergent

Use less detergent if you have soft water and select a shorter cycle to wash the glassware and to get it clean.

There are rust stains on the cutlery

The problem can have different causes. Follow the instructions for the suggested causes to solve the problem.

The affected items are not corrosion resistant.

Avoid washing items that are not corrosion resistant in the dishwasher.

A programme was not run after dishwasher salt was added. Traces of salt have gotten into the wash cycle.

Always run a wash programme without any crockery after adding salt.

The lid of the water softener is loose.

Check that the lid is secure.

White spots appear on dishes and glasses.

Hard water can cause limescale deposits.

• Adjust the water softener level. See section "Adjust the water softener level", page 14.
• Add salt to the water softener. See section "Add salt to the water softener", page 18.

Black or grey marks on dishes.

Aluminium utensils have rubbed against dishes.

Use a mild abrasive cleaner to eliminate the marks.

The dishes are not drying.

The problem can have different causes. Follow the instructions for the suggested causes to solve the problem.

Improper loading

See section "Loading the dishwasher efficiently", page 21.

Dishes are removed too soon

1. Do not empty your dishwasher immediately after washing.
2. Open the door slightly so that the steam can escape.
3. Unload the lower basket first to prevent water dripping from the upper basket.

Wrong programme has been selected

Select a programme with a long washing time. With a short programme, the washing temperature is lower, decreasing cleaning performance.

Washing kitchen utensils with an absorbent coating or deteriorated surface quality

Water drainage is more difficult with such items. Cutlery or dishes of this type are not suitable for washing in the dishwasher.

Error messages

The E1 error code is displayed

Slow to fill with water

• Tap is not open. • Water intake is restricted. • Water pressure is too low.

The E3 error code is displayed

Not reaching required temperature

Malfunction of heating element.

WARNING!

• Only authorised technicians may carry out repairs.
• If you experience problems with the product, please see if the user instructions and troubleshooting information in the user manual can help you find a solution. If the problem persists:
• turn off the product, – unplug the product from its power supply, and
• contact the support.

WARNING!

• Any repair performed by someone who is not a qualified technician puts the users of the product at risk of personal injury.
• Any warranty claim resulting from repairs performed by someone who is not a qualified technician shall not be covered by the warranty.

NOTE!

If your product is broken, consider repairing it. Repairing instead of buying new is good for the environment.

The spare parts listed in the EU regulation 2019/2022 will be available to professional repairers at least 10 years after this product was placed on the market.

The E4 error code is displayed

Overflow

Leak from dishwasher.

WARNING!

• Only authorised technicians may carry out repairs.
• If you experience problems with the product, please see if the user instructions and troubleshooting information in the user manual can help you find a solution. If the problem persists:
• turn off the product, – unplug the product from its power supply, and
• contact the support.

WARNING!

• Any repair performed by someone who is not a qualified technician puts the users of the product at risk of personal injury.
• Any warranty claim resulting from repairs performed by someone who is not a qualified technician shall not be covered by the warranty.

NOTE!

If your product is broken, consider repairing it. Repairing instead of buying new is good for the environment.

The spare parts listed in the EU regulation 2019/2022 will be available to professional repairers at least 10 years after this product was placed on the market.

The Ed error code is displayed

Failure of communication between main PCB and display PCB

Open circuit or break in communication wiring.

WARNING!

• Only authorised technicians may carry out repairs.
• If you experience problems with the product, please see if the user instructions and troubleshooting information in the user manual can help you find a solution. If the problem persists:
• turn off the product, – unplug the product from its power supply, and
• contact the support.

WARNING!

• Any repair performed by someone who is not a qualified technician puts the users of the product at risk of personal injury.
• Any warranty claim resulting from repairs performed by someone who is not a qualified technician shall not be covered by the warranty.

NOTE!

If your product is broken, consider repairing it. Repairing instead of buying new is good for the environment.

The spare parts listed in EU regulation 2019/2022 will be available to professional repairers for at least 10 years after this product was placed on the market.

INSTALLATION

Follow the instructions in this section to install your machine.

WARNING!

Electrical shock hazard! Disconnect electrical power before installing the dishwasher. Failure to do so could result in death or electrical shock.

WARNING!

Read the safety information and the full instructions before installing or using this product.

WARNING!

• Installation and repair can only be carried out by a qualified technician. • Electrical equipment must be installed by professionals. • Hoses should be installed by professionals. - Any repair performed by someone who is not a qualified technician puts the users of the product at risk of personal injury. - Any warranty claim resulting from repairs performed by someone who is not a qualified technician shall not be covered by the warranty.

WARNING!

Use the new hose sets supplied with the machine. Do not reuse old hose sets.

CAUTION!

Do not install or store the product in environments where the temperature falls below 0 °C.

Unpack the machine.

WARNING!

Remove all packaging material before using the machine. Otherwise, serious damage may result.

1. Remove the cardboard box and cardboard packaging.
2. Remove the plastic packaging.
3. Remove the pieces of foam from the bottom.
4. Lift the product and remove the base packaging.
5. Remove the tape holding the door shut.
6. Remove the accessories from the upper basket.
7. Remove the styrofoam packaging from the baskets.
8. Remove the steel wire holding the spray arms in place.
9. Remove the cable tie holding the power cord, drain hose and water supply hose.
10. Verify that the spray arms and the baskets move freely.

WARNING!

Keep all packaging material well away from children. There is a risk of suffocation!

Connect the cold-water supply hose to a tap

CAUTION!

• If the water pipes are new or have not been used for an extended period of time, let the water run to make sure that the water is clear. This precaution is necessary to avoid the risk of the water inlet becoming blocked and damaging the dishwasher.
• If your sink has a spray jet fed by a hose that is connected to the same water line as the dishwasher, the hose could burst. If your sink has one, it is recommended that the hose be disconnected and the hole plugged.

1

2

1. Lift up the hose to the tap.
2. Screw the connector onto the threads of the tap.

Connect the safety supply hose to a tap

Use the safety supply hose to ensure that the flow of water stops if the hose is damaged. The hose is double-walled and the air space between the inner and the outer corrugated hose fills up with water if the hose is damaged.

CAUTION!

• If the water pipes are new or have not been used for an extended period of time, let the water run to make sure that the water is clear. This precaution is necessary to avoid the risk of the water inlet becoming blocked and damaging the dishwasher.
• If your sink has a spray jet fed by a hose that is connected to the same water line as the dishwasher, the hose could burst. If your sink has one, it is recommended that the hose be disconnected and the hole plugged.

1

2

1. Lift up the hose to the tap.
2. Screw the connector onto the threads of the tap.

Connect to an external drain

CAUTION!

• Avoid bending, kinking or squashing the drain hose.
• Do not immerse the end of the drain hose into the waste water. Immersing the hose could hamper the drainage and cause waste water to go back into the dishwasher again.
• Do not use a drain hose extension longer than 4 metres. Otherwise the cleaning performance of the dishwasher could be impaired.
• The drain pipe connection must be at a height of less than 100 cm from the base of the dishwasher. Otherwise you must drain excess water into a suitable container held lower than the sink.

Position the drain hose into a floor drain

Connect the drain hose to a sink drain pipe

Position the drain hose into a sink

Use the drain hose holder to keep the drain hose bent downward into the sink without kinking.

Connecting to the electrical supply

WARNING!

Electrical equipment must be installed by professionals.

WARNING!

For personal safety:

• Do not use an extension cord or an adapter plug with this product.
• Do not, under any circumstances, cut or remove the earthing connection from the power cord.

Electrical requirements

• Look at the rating label to check the rated voltage and connect the dishwasher to the appropriate power supply.
• Use the recommended fuse (10A/13A/16A), time delay fuse, or circuit breaker.
• Connect to a separate circuit that serves this product only.

Electrical connection

• Ensure that the voltage and frequency of the power supply match those on the rating plate.
• Only insert the plug into a power socket that is properly and reliably earthed.
• Check with a qualified electrician or service representative if you are in doubt whether the product is properly earthed.
• If the electrical socket to which the product must be connected is not appropriate for the plug, replace the socket with the help of a qualified electrician.

WARNING!

Do not use adapters or the like, as they could cause overheating and fires.

- Make sure that the power plug is always accessible or that a switch is incorporated in the fixed wiring in accordance with the wiring rules, so that the product can be disconnected from the mains.

WARNING!

Ensure the dishwasher is correctly earthed before use.

Position the machine

WARNING!

• Take care to avoid kinking or crushing the power cord. - If the power cord is damaged, it must be replaced by the manufacturer, the manufacturer's service agent or similarly qualified persons in order to avoid a hazard.

CAUTION!

• This product is only intended for indoor use.
• The product must be installed on a clean, flat, and solid surface and leveled using the adjustable feet.

NOTE!

• The dishwasher is equipped with water supply and drain hoses that can be positioned either on the right or the left sides to facilitate proper installation.
• Depending on where your electrical outlet is, you may need to cut a hole in the side of the nearest cabinet.
• If the dishwasher must be moved, try to keep it in the vertical position. If absolutely necessary, it can be laid on its back.

1. Install the dishwasher in a cabinet with the indicated dimensions.

NOTE! The gap between the top of the dishwasher and the cabinet, and between the edge of the outer door and the edge of the cabinet can be less than 5 mm.

1. If the dishwasher is installed in a corner cabinet, make sure there is sufficient space around the fully opened dishwasher door.

Install the wooden door panel

NOTE!

Possible dimensions for wooden door panel: Height: 65.5-72 cm, width: 59 cm, thickness 2 cm and max weight of 7 kg.

4

5

1. Attach the handle to the wooden door panel using the 2 handle supports and the 2 screws.
2. Attach the 2 mounting brackets to the wooden door panel using the 8 screws.
3. Insert the handle supports and the mounting brackets into the slots in the dishwasher door. Push the panel gently downward and make sure the handle supports and the mounting brackets are in position.
4. Remove the 4 short screws.
5. Attach the wooden door panel to the dishwasher door with the 4 long screws.

Fit the condensation strip

1

2

1. Remove the backing paper from the condensation strip.
2. Fit the condensation strip under the work surface of the cabinet.

NOTE! Make sure that the condensation strip is flush with the edge of the work surface.

Change to the longer feet

You can replace the pre-installed 90 mm long feet with the supplied 110 mm long feet if needed.

1

2

3

4

5

6

1. Carefully lay the dishwasher on its back.
2. Unscrew the two 90 mm long front feet.
3. Unscrew the 90 mm long rear foot with a cross-head screwdriver by turning the screw.
4. Screw the two 110 mm long front feet onto the dishwasher.
5. Screw the 110 long rear foot onto the dishwasher with a cross-head screwdriver by turning the screw. CAUTION! The feet must not protrude more than 100 mm.
6. Lift the dishwasher to a standing position.

Level the machine

Level your dishwasher by adjusting the height of the front feet and the rear foot individually.

Check if there are any feet not touching the floor. If any foot is not touching the floor: screw out the foot until it makes contact with the floor.

1

2

3

1. To adjust the rear foot, use a cross-head screwdriver and turn the screw.
2. To adjust the front feet, use a flat-head screwdriver and turn the front feet.

You can also turn the front feet by hand.

NOTE! The maximum adjustment height of the feet is 60 mm with the longer feet.

1. Use a spirit level to check if the dishwasher is perfectly level and adjust the feet again if needed. CAUTION! The dishwasher must not be tilted more than 2°.

Adjust the door spring tension

The door springs are set at the factory to the correct tension for the outer door. If a wooden door panel is fitted, you will have to adjust the door spring tension.

1. Rotate the adjusting screw to tighten or relax the spring tension.

NOTE! The door spring tension is correct when the door remains horizontal in the fully opened position and the door closes with a light force applied with a finger.

Secure the machine in place - for normal work surfaces

CAUTION!

Do not do this if you have a marble or granite work surface.

2

3

1. Fit the 2 support brackets into the 2 slots.
2. Push the dishwasher to the recommended position in the cabinet.
3. Use the 2 wood screws to secure the dishwasher to the work surface.

Secure the machine in place - for marble or granite surfaces

1

2

3

1. Remove the 2 screw covers.
2. Use the 2 wood screws to secure the dishwasher to the adjacent cabinets.
3. Refit the 2 screw covers.

SPECIFICATIONS

Technical specifications

Model code See section "Find the model code", page 13
Height 815-875 mm
Width 598 mm
Depth (door closed) 550 mm
Depth (door opened 90 °) 1150 mm
Weight 35.0 kg
Capacity 12 place settings
Power supply 220-240 V, 50 Hz
Maximum current 10 A
Rated power	1760-2100 W
Standard water pressure	0.04 MPa ~ 1 MPa

Energy efficiency

You can find information about the energy efficiency of this product in EPREL, the European product registry for energy labelling. Go to the EPREL website and use the model identifier to find the information. The model identifier can be found on the energy label accompanying the product.

EPREL website: https://eprel.ec.europa.eu/

ENERG

SUPPLIER'S NAME

MODEL IDENTIFIER

Dimensions (mm)

Consumption values

Actual values for a programme may differ from the values presented here. The values given for programmes other than the ECO programme are indicative only.

Programme Programme duration(hours:minutes)		Energy consumption (kWh) Water consumption (l)
90 min 1:30 0.839 11.5
ECO 3:18 0.824 11.0
Glass 2:00 0.902 15.2
Intensive 3:25 1.549 18.7
Rapid 0:30 0.652 11.0
Universal	2:55 1.239 18.7

EU directives and standards

This product fulfils the applicable EU directives and regulations and carries the CE mark. If not included with the product, a copy of the EU Declaration of Conformity is available on request.

• The performance of the product has been tested in compliance with standard EN 50242 for dishwashers.
• Concerning EU regulation 2019/2022, the programme used for comparability tests in accordance with EN 50242: ECO; other settings: – Position of upper basket: lower position;
• Rinse aid setting: 6;
• Softener setting: H3.

Contents

SAFETY 55

Warnings.... 55

Intended use 55

●

●

●

●

4

5

FIRST STEPS

2

3

2

3

4

5

2

3

2

3

4

5

6

2

3

4

5

4

2

A. Glass

B. Dessert dish

C. Dinner plate

D. Soup plate

2

3

4

5

6

2

3

4

5

6

7

8

9

2

3

4

2

2

4

5

2

2

3

4

5

6

2

3

Safety during installation

WARNING!

●

●

After disk 1

●

●

4

5

GETTING STARTED

2

3

2

3

4

5

2

3

2

3

4

5

6

2

3

4

5

2

3

4

2

A. Glass B. Dessert bowl C. Mattallrikar D. Deep plates E. Dessert plates of melamine F. Melamine bowl G. Oval serving dish H. Glass bowl I. Cutlery basket J. Dessert bowls

A. Table spoons B. Forks C. Knives D. Tea spoons E. Dessert spoons F. Serving spoons G. Serving forks H. Sauce ladles

A. Table spoons B. Forks C. Knives D. Tea spoons E. Dessert spoons F. Serving spoons G. Serving forks H. Sauce ladles

2

3

4

5

2

3

4

5

6

2

3

4

2

2

4

5

2

2

3

4

5

6

2

3

2

3

2

3

Fill the plate rack 168

How to load the dishwasher efficiently.... 168

Dirty dishes.... 181

●

●

After wash 1

●

4

5

GETTING STARTED

A. Dishwasher detergent dispenser B. Rinse aid dispenser

WARNING!

2

3

2

3

4

5

2

3

2

3

4

5

6

2

3

4

5

2

3

4

2

1. Insert the cup shelf.
2. Remove the cup shelf.

Insert the plate rack.

1. Place in the plate rack.

How to load the dishwasher efficiently

A. Glasses

B. Dessert plates

C. Dinner plates

D. Soup plates

E. Melamine dessert plates

F. Melamine bowls

G. Oval serving dishes

H. Glass bowls

I. Cutlery basket

J. Dessert bowls

A. Soup spoons B. Forks C. Knives D. Teaspoons E. Dessert spoons F. Serving spoons G. Serving forks H. Soup ladles

A. Soup spoons B. Forks C. Knives D. Teaspoons E. Dessert spoons F. Serving spoons G. Serving forks H. Soup ladles

2

3

4

5

2

3

4

5

6

2

3

4

5

6

7

8

9

2

3

4

2

3

4

5

6

2

2

4

5

2

2

3

4

6

2

3

2

3

2

3

●

●

After task 1

●

●

4

5

GETTING STARTED

Get to know your dishwasher

Control buttons

A. Detergent dispenser B. Rinse aid dispenser

WARNING!

Recovery is performed before each X program.

NOTE!

2

3

2

3

4

5

2

3

2

3

4

2

1. Raise the cup rack.
2. Lower the cup rack.

1. Fold down the plate racks.

A. Glass B. Dessert plates C. Dinner plates D. Soup plates E. Melamine dessert plates F. Melamine bowl G. Oval dishes H. Glass bowls I. Cutlery basket J. Ice cream dishes

A. Soup spoons B. Forks C. Knives D. Teaspoons E. Table spoons F. Serving spoons G. Serving forks H. Gravy ladles

A. Soup spoons B. Forks C. Knives D. Teaspoons E. Table spoons F. Serving spoons G. Serving forks H. Gravy ladles

2

3

4

5

2

3

4

5

6

2

3

2

3

4

2

3

4

5

6

2

2

4

5

2

2

3

4

5

6

2

3

2

3

2

3

●

●

After weighing 1

●

●

4

5

STARTING

2

3

2

3

4

5

2

3

2

3

4

5

2

3

4

2

1. Lift the cup rest up.
2. Lower the cup rest down.

A. Glass

A. Soup spoons B. Forks C. Knives D. Teaspoons E. Dessert spoons F. Serving spoons G. Serving forks H. Sauce ladles

A. Soup spoons B. Forks C. Knives D. Teaspoons E. Dessert spoons F. Serving spoons G. Serving forks H. Sauce ladles

2

3

4

5

6

2

3

4

5

6

7

8

9

2

3

4

2

3

4

5

6

2

2

4

5

2

2

3

2

3

2

3

2

3

Door gasket adjusted 337

●

●

After washing 1

●

●

4

5

GET STARTED

A. Detergent dispenser B. Rinse aid dispenser

WARNING!

A. Safety intake hose B. Drain hose holder C. Salt funnel D. Longer legs

2

3

2

3

4

5

2

3

2

3

4

5

6

2

3

4

5

2

3

4

2

A. Glass B. Dessert plates C. Dinner plates D. Soup plates E. Melamine dessert plates F. Melamine bowls G. Oval platter H. Glass bowl I. Knife and fork holder J. Dessert bowls

A. Soup spoons B. Forks C. Knives D. Teaspoons E. Dessert spoons F. Table spoons G. Dinner forks H. Sauce ladles

A. Soup spoons B. Forks C. Knives D. Teaspoons E. Dessert spoons F. Table spoons G. Dinner forks H. Sauce ladles

2

3

4

5

6

2

3

4

5

6

7

8

9

2

3

4

2

3

4

5

6

2

2

Electrical connection

WARNING!

4

5

2

1. Remove the paper from the back of the moisture seal strip.
2. Place the moisture seal strip under the worktop of the cabinet.

2

3

4

5

6

2

3

Door spring adjusted

2

3

2

3