PD-C 360i/8 UC - Motion detector Esylux - Free user manual and instructions
Find the device manual for free PD-C 360i/8 UC Esylux in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Motion Detector |
| Brand | Esylux |
| Model | PD-C 360i/8 UC |
| Detection Angle | 360° |
| Detection Range | 8 m (at mounting height of 2.5 m) |
| Mounting Type | Ceiling mount |
| Mounting Height | 2.5 m (recommended) |
| Power Supply | 230 V AC, 50 Hz |
| Power Consumption | < 0.5 W (standby) |
| Switching Capacity | max. 2300 W (incandescent), 1000 VA (fluorescent) |
| Time Setting | 10 s to 30 min (adjustable) |
| Light Sensitivity | 2 to 2000 lux (adjustable) |
| Dimensions (Ø x H) | 110 mm x 70 mm |
| Weight | 150 g |
| Protection Rating | IP20 |
| Operating Temperature | -10 °C to +50 °C |
| Material | Polycarbonate (PC) |
| Maintenance | Clean with a dry cloth; do not use solvents |
| Safety | Complies with CE standards; installation by qualified electrician required |
| Spare Parts | Contact Esylux service for replacement parts |
| Repairability | Not user-serviceable; contact professional |
Frequently Asked Questions - PD-C 360i/8 UC Esylux
How do I install the PD-C 360i/8 UC motion detector?
The detector is designed for ceiling mounting. Ensure power is off, fix the base to the ceiling, connect wires (L, N, load) according to the diagram, and snap on the cover. Recommended mounting height is 2.5 m.
What is the detection range of this detector?
The PD-C 360i/8 UC has a 360° detection angle and a range of up to 8 meters at a mounting height of 2.5 m. The range can be reduced if mounted lower.
Can I adjust the time the light stays on?
Yes, the time setting is adjustable from 10 seconds to 30 minutes via a potentiometer on the detector.
How do I set the light sensitivity?
The light sensitivity (lux threshold) can be adjusted from 2 to 2000 lux using the built-in potentiometer. Turn it to the 'sun' symbol for daytime operation or to the 'moon' symbol for night-only operation.
What types of loads can this detector switch?
It can switch incandescent loads up to 2300 W, fluorescent loads up to 1000 VA, and LED loads up to a lower limit (check manual). For inductive loads like motors, use a contactor.
Why does the detector not detect me?
Possible reasons: mounting height too high or low, the detector is facing the wrong direction, or the sensitivity is set too low. Ensure no obstacles block the sensor and that the ambient temperature is within range.
Can I use the detector outdoors?
No, the IP20 rating means it is only suitable for indoor use. For outdoor use, consider an IP54 model.
How do I clean the detector?
Use a dry, soft cloth to wipe the surface. Do not use water, solvents, or abrasive cleaners as they may damage the sensor.
What should I do if the detector triggers falsely?
Check for heat sources (e.g., heaters, air conditioning) or moving objects (e.g., curtains, pets) within the detection zone. Adjust sensitivity or mounting position to reduce false triggers.
Where can I find the user manual?
The user manual can be downloaded for free from notice-facile.com or the Esylux website. It includes detailed installation instructions and troubleshooting tips.
User questions about PD-C 360i/8 UC Esylux
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Motion detector in PDF format for free! Find your manual PD-C 360i/8 UC - Esylux and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PD-C 360i/8 UC by Esylux.
USER MANUAL PD-C 360i/8 UC Esylux
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Esylux
Model : PD-C 360i/8 UC
Category : Motion detector