MARS 980 PRO - SSD XPG - Free user manual and instructions
Find the device manual for free MARS 980 PRO XPG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Internal SSD |
| Form Factor | M.2 2280 |
| Interface | PCIe Gen4 x4, NVMe 1.4 |
| Capacity | 1 TB / 2 TB (depending on model) |
| Sequential Read Speed | Up to 7000 MB/s |
| Sequential Write Speed | Up to 6800 MB/s |
| Random Read (IOPS) | Up to 1,000,000 |
| Random Write (IOPS) | Up to 1,000,000 |
| Controller | Phison E18 or similar |
| NAND Flash | 3D TLC |
| DRAM Cache | DDR4 |
| Dimensions (L x W x H) | 80 x 22 x 2.15 mm (with heatsink: up to 11 mm) |
| Weight | Approx. 10 g (without heatsink) |
| Operating Temperature | 0°C to 70°C |
| Storage Temperature | -40°C to 85°C |
| Total Bytes Written (TBW) | Up to 1,800 TBW (for 2TB model) |
| Mean Time Between Failures (MTBF) | 1.5 million hours |
| Power Consumption (Active) | Max 6 W |
| Power Consumption (Idle) | 0.33 W |
| Software Support | XPG OUTLAW, SSD Toolbox |
| Warranty | 5 years limited |
| Key Features | Heatsink design, LDPC error correction, End-to-End Data Protection |
| Package Contents | SSD, Heatsink (if included), Screw, Quick Start Guide |
Frequently Asked Questions - MARS 980 PRO XPG
How do I install the XPG MARS 980 PRO SSD?
Insert the M.2 SSD into the slot at a 30-degree angle, then secure it with the screw. If your motherboard has a heatsink, remove the protective film from the SSD's thermal pad before attaching.
Is the XPG MARS 980 PRO compatible with PCIe Gen3 motherboards?
Yes, it is backward compatible with PCIe Gen3. However, it will run at Gen3 speeds, reducing performance to around 3500 MB/s.
Does the MARS 980 PRO require a heatsink?
For optimal performance and to prevent thermal throttling during heavy loads, it is recommended to use an M.2 heatsink. The drive may come with one or you can use your motherboard's heatsink.
What software is available for managing the SSD?
You can use XPG OUTLAW or XPG SSD Toolbox for firmware updates, health monitoring, and secure erase functions.
How do I check the SSD's health and temperature?
Download the XPG SSD Toolbox software. It provides real-time data on drive health, temperature, total bytes written, and more.
Can I use this SSD for PlayStation 5 (PS5)?
Yes, the XPG MARS 980 PRO meets the PS5's requirements for speed and form factor. Ensure it is installed in the internal M.2 slot and has a heatsink attached.
What is the warranty period for the MARS 980 PRO?
The drive comes with a 5-year limited warranty or up to the TBW rating, whichever is reached first.
How do I update the firmware?
Use the XPG SSD Toolbox software to check for firmware updates. Follow the on-screen instructions; do not power off the system during the update.
Why is my SSD not detected?
Ensure it is fully inserted into the M.2 slot and screwed in place. Check if the slot is enabled in BIOS. Try a different M.2 slot or update the BIOS.
What is the difference between MARS 980 PRO and GAMMIX S70?
The MARS 980 PRO features a dedicated heatsink design for better thermal management, while GAMMIX S70 may have a standard heatsink. Performance is similar.
User questions about MARS 980 PRO XPG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your SSD in PDF format for free! Find your manual MARS 980 PRO - XPG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MARS 980 PRO by XPG.
USER MANUAL MARS 980 PRO XPG
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : XPG
Model : MARS 980 PRO
Category : SSD