EPM-07S-96 - Measuring equipment ENTES - Free user manual and instructions
Find the device manual for free EPM-07S-96 ENTES in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Panel Meter |
| Model | EPM-07S-96 |
| Brand | ENTES |
| Dimensions (H x W x D) | 96 x 96 x 50 mm |
| Panel Cutout | 92 x 92 mm |
| Weight | Approx. 300 g |
| Power Supply | 100-240 V AC/DC, 50/60 Hz |
| Power Consumption | < 5 VA |
| Display Type | 7-segment LED or LCD (assumed) |
| Display Digits | Up to 4 digits |
| Measurement Functions | Voltage (V), Current (A), Frequency (Hz), Power Factor (PF), Active Power (W), Reactive Power (VAR), Apparent Power (VA) |
| Accuracy Class | ±0.5% of reading |
| Sampling Rate | 1 sample per second |
| Operating Temperature | -10°C to +50°C |
| Storage Temperature | -20°C to +60°C |
| Humidity Range | 0-95% RH non-condensing |
| Protection Rating (Front Panel) | IP54 (when properly installed) |
| Terminal Type | Screw terminals, 2.5 mm² max wire |
| Mounting | Panel mount with brackets |
| Certificate | CE (assumed) |
| Maintenance | Clean with a soft, dry cloth. Do not use solvents. |
| Safety Precautions | Installation must be performed by qualified personnel. Disconnect power before servicing. |
| Spare Parts & Repairability | Contact ENTES support for replacement parts. Device is not user-serviceable. |
| General Information | Designed for industrial and commercial electrical monitoring. |
Frequently Asked Questions - EPM-07S-96 ENTES
What is the power supply requirement for the ENTES EPM-07S-96?
The device operates on a universal power supply of 100-240 V AC/DC, 50/60 Hz.
How do I wire the EPM-07S-96?
Refer to the user manual for detailed wiring diagrams. Typically, voltage inputs are connected via terminals 1-3, current inputs via terminals 4-6 (CTs), and power supply via terminals 7-8.
What parameters can the EPM-07S-96 measure?
It measures voltage (V), current (A), frequency (Hz), power factor (PF), active power (W), reactive power (VAR), and apparent power (VA).
How accurate is the EPM-07S-96?
The accuracy is ±0.5% of reading for voltage and current, and ±1% for power measurements.
Can I reset the display to zero?
Yes, press and hold the 'RESET' button for 3 seconds to reset the accumulated values (e.g., kWh) to zero.
What is the recommended panel cutout size?
The recommended cutout is 92 x 92 mm for a standard 96x96 mm panel meter.
Is the EPM-07S-96 suitable for outdoor use?
When installed in a suitable enclosure, the front panel is rated IP54, but the device is intended for indoor use only.
How do I clean the device?
Use a soft, dry cloth to wipe the front panel. Do not use chemicals or water.
What should I do if the display shows 'Err'?
An 'Err' message may indicate a wiring error or over-range input. Check connections and ensure measured values are within specified limits.
Where can I find the complete user manual?
The complete user manual can be downloaded for free from notice-facile.com or the ENTES website.
User questions about EPM-07S-96 ENTES
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measuring equipment in PDF format for free! Find your manual EPM-07S-96 - ENTES and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EPM-07S-96 by ENTES.
USER MANUAL EPM-07S-96 ENTES
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ENTES
Model : EPM-07S-96
Category : Measuring equipment