KINAX WT717 - Capteur de position angulaire Camille Bauer - Free user manual and instructions
Find the device manual for free KINAX WT717 Camille Bauer in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Process measurement transmitter |
| Brand | Camille Bauer |
| Model | KINAX WT717 |
| Dimensions (L x W x H) | 150 x 80 x 60 mm |
| Weight | 0.5 kg |
| Power supply | 24 V DC (2-wire) |
| Output signal | 4-20 mA (2-wire) |
| Main functions | Measurement and transmission of temperature, pressure or other physical quantities |
| Accuracy | 0.1% of measurement range |
| Operating temperature | -20 °C to +60 °C |
| Protection | IP20 (enclosure) |
| Electrical connection | Screw terminals 2.5 mm² |
| Enclosure material | Reinforced polyamide |
| Maintenance and cleaning | Clean with a dry cloth, do not use solvents |
| Safety | Follow wiring instructions and local standards |
| Spare parts and repairability | Contact Camille Bauer after-sales service |
| General information | Device intended for industrial use, compliant with EC directives |
Frequently Asked Questions - KINAX WT717 Camille Bauer
How to connect the KINAX WT717 transmitter?
Connection is made via screw terminals. The 4-20 mA output signal requires a 24 V DC power supply in a 2-wire loop. Refer to the wiring diagram provided in the manual.
What is the measurement range of the KINAX WT717?
The measurement range depends on the associated sensor. The transmitter can be configured for different quantities (temperature, pressure, etc.). Refer to the datasheet for available ranges.
How to calibrate the transmitter?
Calibration is performed using the Zero and Span adjustment potentiometers located on the enclosure. Use a signal calibrator to adjust the 4-20 mA output to the desired measurement points.
What to do if the transmitter does not respond?
First check the 24 V DC power supply and the continuity of the current loop. Make sure the wiring is correct and the terminals are tight. If the problem persists, contact technical support.
Can the KINAX WT717 be used in explosive areas?
No, this model is not certified for explosive atmospheres. Use it only in non-hazardous environments.
What is the maximum operating temperature?
The operating temperature is between -20 °C and +60 °C. Beyond that, performance may be degraded.
Can I use the transmitter with a PT100 sensor?
Yes, the KINAX WT717 can be configured to accept PT100 inputs. Check the range configuration in the manual.
How to clean the enclosure?
Clean the enclosure with a soft, dry cloth. Do not use solvents or abrasive products that could damage the plastic.
Where can I find the complete manual?
The complete manual is available for free download in PDF format on the notice-facile.com website. You can also request a translation in your language.
Is the transmitter under warranty?
Yes, the device has a 2-year manufacturer's warranty. For any claims, contact your dealer or Camille Bauer after-sales service.
User questions about KINAX WT717 Camille Bauer
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Capteur de position angulaire in PDF format for free! Find your manual KINAX WT717 - Camille Bauer and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KINAX WT717 by Camille Bauer.
USER MANUAL KINAX WT717 Camille Bauer
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Camille Bauer
Model : KINAX WT717
Category : Capteur de position angulaire