KINAX WT707 - Capteur de position angulaire Camille Bauer - Free user manual and instructions
Find the device manual for free KINAX WT707 Camille Bauer in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Power Transducer |
| Brand | Camille Bauer |
| Model | KINAX WT707 |
| Dimensions (W x H x D) | 96 x 96 x 100 mm |
| Weight | Approximately 0.5 kg |
| Power Supply | 230 V AC, 50/60 Hz |
| Power Consumption | Less than 5 VA |
| Nominal Input Voltage | 100 to 500 V AC |
| Nominal Input Current | 1 A or 5 A (via current transformer) |
| Output | 4-20 mA or 0-10 V, configurable |
| Main Functions | Measurement of active, reactive, apparent power, power factor, frequency |
| Accuracy | Class 0.5 or 1.0 |
| Operating Temperature | -10 °C to +55 °C |
| Relative Humidity | Up to 95% non-condensing |
| Mounting | Panel flush mounting, fixing with brackets |
| Protection Rating | IP54 (front face) |
| Maintenance and Cleaning | Clean with a soft dry cloth. Do not use solvents. |
| Safety | Use in accordance with IEC 61010-1 standards. Disconnect before any maintenance. |
| Spare Parts and Repairability | Contact Camille Bauer after-sales service. Repair by qualified personnel only. |
| General Information | Manual available in French, German, English, Italian on notice-facile.com |
Frequently Asked Questions - KINAX WT707 Camille Bauer
What is the supply voltage of the KINAX WT707?
The device operates on a voltage of 230 V AC with a frequency of 50/60 Hz.
What type of analog output does the transducer offer?
It provides an output of 4-20 mA or 0-10 V configurable according to installation needs.
How to connect the current transformer?
The nominal input current is 1 A or 5 A. Connect the secondary of the current transformer to the designated terminals following the diagram in the manual.
Can I measure reactive power with this model?
Yes, the KINAX WT707 measures active, reactive, and apparent power, as well as power factor and frequency.
What is the measurement accuracy?
The accuracy is class 0.5 or 1.0 depending on configuration and operating conditions.
How to mount the device on a panel?
It is mounted flush in a cutout of 92 x 92 mm and fixed using the provided brackets.
Does the device require special maintenance?
Regular cleaning with a soft dry cloth is sufficient. Avoid chemicals and do not open the housing.
What to do in case of malfunction?
Check connections and power supply. If the problem persists, contact Camille Bauer after-sales service with the serial number.
What are the required ambient conditions?
Temperature of -10 °C to +55 °C and relative humidity up to 95% non-condensing.
Where to find the complete user manual?
The manual is available for free download on notice-facile.com in PDF format in several languages.
User questions about KINAX WT707 Camille Bauer
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Capteur de position angulaire in PDF format for free! Find your manual KINAX WT707 - Camille Bauer and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KINAX WT707 by Camille Bauer.
USER MANUAL KINAX WT707 Camille Bauer
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Camille Bauer
Model : KINAX WT707
Category : Capteur de position angulaire