G-520 - Paint gun Abac - Free user manual and instructions
Find the device manual for free G-520 Abac in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Air compressor |
| Brand | Abac |
| Model | G-520 |
| Category | Uncategorized |
| Dimensions (L x W x H) | 55 x 40 x 50 cm |
| Weight | 22 kg |
| Power supply | 230 V / 50 Hz |
| Motor power | 1.5 kW |
| Maximum pressure | 8 bar |
| Tank capacity | 24 liters |
| Air flow | 200 L/min |
| Noise level | 97 dB(A) |
| Transmission type | Belt |
| Number of cylinders | 1 |
| Engine oil type | SAE 30 oil |
| Oil capacity | 0.3 L |
| Drain valve | Yes |
| Pressure gauge | Yes |
| Safety valve | Yes |
| Air inlet | 1/4" BSP |
| Maintenance and cleaning | Drain water regularly, clean the air filter, check oil level |
| Safety | Use hearing protection, do not exceed maximum pressure, disconnect before maintenance |
| Spare parts and repairability | Gasket kit, air filter, non-return valve available |
| General information | Manual downloadable from our website |
Frequently Asked Questions - G-520 Abac
How to adjust the output pressure?
Use the pressure regulator located on the compressor. Turn the knob clockwise to increase pressure and counterclockwise to decrease it. Check the pressure gauge to read the set pressure.
What oil to use for the engine?
Use SAE 30 motor oil specifically designed for air compressors. Do not use synthetic oil. The oil capacity is 0.3 L.
Why won't my compressor start?
Check the power supply, fuse, and that the switch is in the on position. Make sure the safety valve is not blocked and that the start capacitor is not faulty.
How to drain water from the tank?
Open the drain valve located under the tank after the compressor is turned off and disconnected. Let the water flow out. Perform this operation regularly to prevent corrosion.
What to do if the pressure does not rise enough?
Check for air leaks at the fittings, the non-return valve, and the condition of the air filter. A worn belt can also reduce pressure. Replace defective parts.
What type of air inlet to use?
The compressor is equipped with a 1/4" BSP air inlet. Use compatible fittings for your pneumatic tools.
The compressor makes an abnormal noise, what to do?
An abnormal noise may come from a loose belt, a defective bearing, or insufficient oil. Immediately stop the unit, check these points and contact a professional if necessary.
Can the compressor be used continuously?
The compressor is designed for intermittent use. Observe the on/off cycles: generally 10 minutes of operation for 10 minutes of rest. Continuous use may damage the motor.
What are the safety precautions?
Always wear hearing protection, do not exceed the indicated maximum pressure, use suitable hoses and fittings, and disconnect the unit before any maintenance.
Where to find spare parts?
Spare parts such as gaskets, filters, and valves are available on our website or from Abac authorized dealers. Refer to the manual for part numbers.
User questions about G-520 Abac
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Paint gun in PDF format for free! Find your manual G-520 - Abac and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. G-520 by Abac.
USER MANUAL G-520 Abac
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Abac
Model : G-520
Category : Paint gun