G-202 - Sander Abac - Free user manual and instructions
Find the device manual for free G-202 Abac in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Orbital sander |
| Brand | Abac |
| Model | G-202 |
| Dimensions (L x W x H) | 250 x 120 x 150 mm |
| Weight | 1.5 kg |
| Power supply | Electric, 230 V ~ 50 Hz |
| Power consumption | 300 W |
| No-load speed | 12,000 rpm |
| Oscillation diameter | 1.5 mm |
| Pad type | Triangular or round pad (depending on model) |
| Paper attachment system | Hook-and-loop (Velcro) |
| Dust collection | Integrated dust bag |
| Main functions | Sanding flat surfaces, deburring, light polishing |
| Maintenance and cleaning | Regularly dust the ventilation slots, empty the bag after use |
| Safety | Locking switch, protection against accidental restart |
| Spare parts and repairability | Carbon brushes, switch, sanding pad available |
| General information | Domestic use, sound level 85 dB(A), vibrations < 2.5 m/s² |
Frequently Asked Questions - G-202 Abac
How to change the sandpaper on the G-202 sander?
Peel off the old paper from the pad using the hook-and-loop backing and attach the new one by pressing firmly.
My sander does not start, what should I do?
First check that the switch is in the on position and that the power cord is plugged in. If nothing happens, the carbon brushes may be worn.
How to empty the dust bag?
Unclip the dust bag from the extraction port, empty it over a trash can, and reattach it by clipping it correctly.
What type of sandpaper to use?
Use hook-and-loop sandpaper of dimensions suitable for the pad. For the G-202, the standard size is 125 mm in diameter.
The sander vibrates abnormally, why?
Excessive vibration may be due to a deformed pad or poorly attached paper. Also check that the bearings are not worn.
How to replace the carbon brushes on the G-202?
Unscrew the side caps, remove the worn carbon brushes and insert the new ones respecting the mounting direction. A spring must press on each brush.
What is the power consumption of the sander?
The power consumption is 300 W at 230 V. It draws about 1.3 A under normal operation.
Can I use the sander without the dust bag?
Yes, but this projects dust into the air. It is recommended to wear a protective mask and work in a ventilated area.
How to maintain the ventilation slots?
Use a dry brush or vacuum cleaner to remove accumulated dust from the slots. Blocked ventilation can cause overheating.
Where to find spare parts for the G-202?
Spare parts such as carbon brushes, switch, or pad are available from authorized Abac dealers or on their website.
User questions about G-202 Abac
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Sander in PDF format for free! Find your manual G-202 - Abac and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. G-202 by Abac.
USER MANUAL G-202 Abac
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Abac
Model : G-202
Category : Sander