G-475 - Compressor Abac - Free user manual and instructions
Find the device manual for free G-475 Abac in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Piston air compressor |
| Brand | Abac |
| Model | G-475 |
| Power supply | 230 V / 50 Hz |
| Motor power | 2.2 kW (3 HP) |
| Maximum pressure | 10 bar |
| Tank capacity | 50 liters |
| Effective air flow | 200 L/min at 8 bar |
| Number of cylinders | 1 (single-cylinder) |
| Lubrication | Oil (oil bath) |
| Noise level | 97 dB(A) |
| Weight | 38 kg |
| Dimensions (L x W x H) | 78 x 40 x 65 cm |
| Main functions | Inflation, painting, pneumatic tools |
| Maintenance and cleaning | Oil change every 100 hours, daily tank drain |
| Safety | Safety valve, pressure switch, thermal protection |
| Spare parts and repairability | Repair kit available, common parts in stock |
| General information | User manual included, 2-year warranty |
Frequently Asked Questions - G-475 Abac
What type of oil to use for the Abac G-475 compressor?
Use a specific compressor oil, preferably a non-detergent mineral oil SAE 30 or a synthetic oil recommended by Abac.
How to drain the compressor tank?
After each use, open the drain valve located under the tank to remove condensation water. Never open under pressure.
Pressure rises too slowly, what to do?
Check that the air filter is not clogged, that the valves are in good condition and that there is no leak. A worn compressor can also lose performance.
What is the maximum operating pressure?
The Abac G-475 compressor is set to stop at 10 bar (max pressure) and restart at about 8 bar.
The motor does not start, what to check?
Make sure the residual current circuit breaker has not tripped, the pressure switch is in 'auto' position and the thermal protection is not triggered.
How often to change the oil?
Oil change is recommended every 100 operating hours or at least once a year. Use new suitable oil.
Can the compressor be used without oil?
No, the Abac G-475 compressor is lubricated by oil bath. Running it dry would quickly destroy the motor and cylinders.
My compressor is leaking at the safety valve, is this normal?
No, if the safety valve leaks, it indicates excessive pressure or a defective valve. Have it checked by a professional.
What pneumatic tools are compatible with this compressor?
This model is suitable for nail guns, staplers, paint sprayers and other moderate consumption tools. For very demanding tools, check the flow rate.
How to reduce compressor noise?
Place the compressor on a rubber mat, move it away from walls and check that the fixings are tight. Adding an intake silencer can also help.
User questions about G-475 Abac
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Compressor in PDF format for free! Find your manual G-475 - Abac and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. G-475 by Abac.
USER MANUAL G-475 Abac
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Abac
Model : G-475
Category : Compressor