LED PFE-200 - Lighting Eurolite - Free user manual and instructions
Find the device manual for free LED PFE-200 Eurolite in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED Par Light |
| Model | LED PFE-200 |
| Dimensions (L x W x H) | 200 x 150 x 100 mm |
| Weight | 1.2 kg |
| Power Supply | AC 100-240V, 50/60Hz |
| Power Consumption | 200W |
| Light Source | 200W Cool White LED |
| Beam Angle | 45° |
| Control Modes | DMX, Master/Slave, Auto, Sound |
| DMX Channels | 2 or 4 |
| Housing Material | Aluminum |
| IP Rating | IP20 (Indoor Use) |
| Cooling | Passive (fanless) |
| Operating Temperature | -10°C to 40°C |
| Mounting Options | Floor stand, truss clamp, hanging |
| Included Accessories | Power cord, mounting bracket |
| Maintenance & Cleaning | Wipe with a soft, dry cloth. Avoid solvents. |
| Safety Notes | Do not expose to rain or moisture. Disconnect power before servicing. |
| Spare Parts & Reparability | Spare parts available via manufacturer. Repairs by qualified personnel only. |
| General Information | Designed for professional stage and event lighting. |
Frequently Asked Questions - LED PFE-200 Eurolite
How do I connect the LED PFE-200 to a DMX controller?
Use a standard 3-pin XLR cable to connect the DMX input of the fixture to the controller's output. Set the DMX address using the control panel. Refer to the DMX section of the manual for addressing details.
What is the maximum number of units that can be daisy-chained?
You can daisy-chain up to 32 units on a single DMX line. Use a DMX terminator at the last fixture to avoid signal reflection.
How do I set the fixture to sound-active mode?
Press the 'Mode' button until 'SOU' appears on the display. Then select 'ON' to enable sound activation. The light will respond to audio via the built-in microphone.
The light is flickering. What should I do?
Check the DMX cable connections and ensure the fixture is properly grounded. If using DMX, verify the address and that no other fixtures are interfering. Also, ensure the power supply is stable.
Can I use this fixture outdoors?
No, the LED PFE-200 has an IP20 rating and is designed for indoor use only. Keep it away from rain, moisture, and extreme temperatures.
What is the beam angle and how can I change it?
The beam angle is fixed at 45°. You can attach a frost filter or honeycomb louvers (available separately) to alter the beam spread.
How do I clean the LED PFE-200?
Disconnect power. Use a soft, dry cloth to wipe the housing and lens. Do not use abrasive cleaners or solvents. Clean the lens periodically to maintain light output.
The display shows 'Err'. What does it mean?
'Err' indicates a system error. Try power cycling the unit. If the error persists, contact technical support. Possible causes: internal communication failure or temperature overload.
Can I replace the LED chip myself?
No, the LED chip is not user-replaceable. If it fails, contact a qualified service center or the manufacturer for replacement.
What is the lifespan of the LED?
The LED has a rated lifespan of approximately 50,000 hours. Actual life depends on operating conditions (temperature, dimming, etc.).Regular maintenance can help maximize longevity.
User questions about LED PFE-200 Eurolite
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lighting in PDF format for free! Find your manual LED PFE-200 - Eurolite and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LED PFE-200 by Eurolite.
USER MANUAL LED PFE-200 Eurolite
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Eurolite
Model : LED PFE-200
Category : Lighting