LED CLS-6 PIX - Lighting Eurolite - Free user manual and instructions
Find the device manual for free LED CLS-6 PIX Eurolite in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED Pixel Light Bar |
| Model | LED CLS-6 PIX |
| Brand | Eurolite |
| Number of LEDs | 6 |
| LED Type | RGB (Red, Green, Blue) |
| Pixel Control | Individual pixel addressing via DMX |
| DMX Channels | 6 (2 per pixel: RGB) |
| DMX Connectors | 3-pin XLR (male/female) |
| Power Supply | AC 100-240V, 50/60Hz |
| Power Consumption | 30W |
| Dimensions (approx.) | 500 x 80 x 100 mm |
| Weight (approx.) | 1.2 kg |
| Ingress Protection | IP20 (indoor use only) |
| Housing Material | Metal and impact-resistant plastic |
| Cooling | Passive convection |
| Operating Temperature | -10°C to 40°C |
| Control Modes | DMX, Master/Slave, Sound-activated, Auto |
| Mounting Options | Floor standing (rubber feet) or truss mount with included bracket |
| Included Accessories | Power cord, user manual, mounting bracket |
| Safety Certification | CE |
| Maintenance | Clean with a soft, dry cloth; avoid moisture |
| Repairability | Professional repair required for internal components |
| Special Features | Strobe, dimmer, color mixing, pixel chase effects |
Frequently Asked Questions - LED CLS-6 PIX Eurolite
How do I set the DMX address on the LED CLS-6 PIX?
Use the MENU button to navigate to the DMX Address setting. Press ENTER, then use the UP/DOWN buttons to select the desired address (range 1-512). Confirm with ENTER and exit with MENU.
How can I switch between DMX, Sound, and Auto modes?
Press the MODE button repeatedly to cycle through DMX, Sound, Auto, and Master/Slave modes. The current mode will be indicated on the display.
What is the power consumption of the LED CLS-6 PIX?
The maximum power consumption is approximately 30W at full brightness. Ensure your power supply can handle the total load when chaining multiple units.
Can I use this fixture outdoors?
No, the LED CLS-6 PIX has an IP20 rating, meaning it is only suitable for indoor use in dry environments. Exposure to moisture or dust may cause damage.
How do I connect multiple LED CLS-6 PIX units together?
Connect units using standard 3-pin DMX cables in a daisy-chain. Set the first unit as Master (press MODE until 'MASTER' appears), and the others as Slave (press MODE until 'SLAVE' shows). DMX addresses should be unique if using external control.
How to clean the LED fixture?
Disconnect from power first. Use a soft, lint-free cloth slightly dampened with water or a mild glass cleaner. Never use abrasives or solvents. Avoid liquid entering the housing.
What does the 'PIX' in the model name mean?
PIX stands for Pixel, indicating that each of the 6 LEDs can be controlled individually for dynamic color effects and patterns.
How do I replace the fuse if it blows?
The fuse is located inside the power inlet module. Pry open the fuse holder with a small screwdriver. Replace with a fuse of the same type: T2A 250V. If it blows again, consult a technician.
Is this light compatible with standard DMX controllers?
Yes, it uses standard DMX512 protocol with 3-pin XLR connectors. It works with any DMX controller that sends RGB pixel data on the assigned channels.
What should I do if the fixture does not power on?
Check the power cord and fuse first. Ensure the mains outlet is live. If still no power, the internal power supply may be faulty; contact professional service for repair.
User questions about LED CLS-6 PIX Eurolite
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lighting in PDF format for free! Find your manual LED CLS-6 PIX - Eurolite and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LED CLS-6 PIX by Eurolite.