PAR-56 Spot CDM150 - Lighting Eurolite - Free user manual and instructions
Find the device manual for free PAR-56 Spot CDM150 Eurolite in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | PAR-56 Spot Light |
| Model | PAR-56 Spot CDM150 |
| Brand | Eurolite |
| Lamp Type | CDM (Ceramic Discharge Metal Halide) 150W |
| Lamp Base | G12 or similar (depending on version) |
| Color Temperature | Approximately 4200K (typical for CDM) |
| Power Supply | 100-240V AC, 50/60Hz (with built-in electronic ballast) |
| Power Consumption | 180W (approx.) |
| Dimensions (L x W x H) | 7.9 x 7.9 x 9.8 inches (200 x 200 x 250 mm) |
| Weight | 2.5 kg (5.5 lbs) |
| Housing Material | Aluminum die-cast |
| Lens Diameter | 7 inches (PAR-56 size) |
| Beam Angle | 25° (typical spot) |
| Control | DMX512 (via 3-pin XLR) or manual |
| DMX Channels | 1 channel (dimming) or optional color wheel? (usually 1 for dimming) |
| Protection Rating | IP20 (indoor use only) |
| Cooling | Passive convection or optional fan |
| Mounting | Floor stand or truss clamp (Omega bracket included) |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Safety Features | Overheat protection, safety cable attachment point |
| Accessories Included | Power cord, DMX cable, user manual |
| Cleaning Instructions | Use a dry, soft cloth; avoid solvents |
| Spare Parts Available | Lamp, lens, ballast module (contact service) |
| Repairability | Modular design for easy lamp and ballast replacement |
Frequently Asked Questions - PAR-56 Spot CDM150 Eurolite
What type of lamp does the Eurolite PAR-56 Spot CDM150 use?
It uses a CDM (Ceramic Discharge Metal Halide) lamp with a power rating of 150W. The exact base type is typically G12, but always refer to the manual.
Can I use this light with DMX control?
Yes, the fixture supports DMX512 protocol via 3-pin XLR connectors. It usually operates on 1 channel for dimming control.
What is the beam angle of the PAR-56 Spot CDM150?
The nominal beam angle is approximately 25°, providing a narrow spot suitable for accentuating objects or stages.
How do I replace the lamp?
Disconnect the fixture from power. Allow the lamp to cool. Open the rear access panel or lens ring (depending on model). Remove the old lamp and insert the new one without touching the glass. Reassemble and test.
What voltage does the light require?
It operates on a universal input of 100-240V AC, 50/60Hz thanks to its built-in electronic ballast.
Can I use the PAR-56 Spot outdoors?
No, the fixture has an IP20 rating, meaning it is only suitable for dry indoor locations. Do not expose it to rain or moisture.
What is the color temperature of the light?
CDM lamps typically produce a daylight white around 4200K. This may vary slightly by manufacturer.
How do I clean the lens and housing?
Use a soft, dry cloth to wipe the lens and housing. For stubborn dirt, use a slightly damp cloth with mild soap. Avoid abrasive cleaners or solvents that may damage the finish.
What safety precautions should I follow?
Always use a safety cable when rigging overhead. Keep flammable materials away. Allow the fixture to cool before handling. Never operate with a damaged lens or cable.
Where can I find spare parts?
Spare parts such as lamps, lenses, and ballast modules can be ordered through Eurolite service centers or authorized dealers. Check the manual for part numbers.
User questions about PAR-56 Spot CDM150 Eurolite
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lighting in PDF format for free! Find your manual PAR-56 Spot CDM150 - Eurolite and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PAR-56 Spot CDM150 by Eurolite.
USER MANUAL PAR-56 Spot CDM150 Eurolite
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Eurolite
Model : PAR-56 Spot CDM150
Category : Lighting