MCC 250K100NM - Scale Kern - Free user manual and instructions
Find the device manual for free MCC 250K100NM Kern in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Industrial Precision Scale |
| Brand | Kern |
| Model | MCC 250K100NM |
| Maximum Capacity | 250 kg |
| Precision (Readability) | 100 g |
| Measurement Units | kg, g, lb, oz |
| Display Type | Backlit LCD Screen |
| Platform Dimensions | 600 x 800 mm |
| Device Dimensions | 800 x 600 x 200 mm |
| Net Weight | 25 kg |
| Power Supply | Mains 230 V / 50 Hz, adapter included |
| Power Consumption | 5 W (max) |
| Main Functions | Simple weighing, tare, parts counting, percentage weighing |
| Maintenance and Cleaning | Clean with a soft, dry cloth; avoid chemicals |
| Safety | Auto-off, overload protection |
| Spare Parts and Repairability | Available from Kern after-sales service; repairability index: 7/10 |
| General Information | Operating temperature: 0-40°C, max humidity 80% non-condensing |
Frequently Asked Questions - MCC 250K100NM Kern
How to turn on the Kern MCC 250K100NM scale?
Plug in the mains adapter, then press the ON/OFF button to turn on the device. The display will show 0.000 kg.
How to perform a tare?
Place the empty container on the platform, then press the TARE button. The display resets to zero to weigh only the contents.
What to do if the display flashes or shows 'Err'?
This may indicate an overload or sensor fault. Remove any load and check the platform is clean. If the error persists, contact Kern technical service.
How to switch from kg to lb?
Press the UNIT button to cycle through the available units (kg, g, lb, oz). Release when the desired unit is displayed.
Can I use the scale with batteries?
No, this model only operates on mains power via the supplied adapter. No battery compartment is provided.
How to clean the scale?
Use a slightly damp soft cloth to wipe the platform and housing. Do not use solvents or abrasive products.
What is the accuracy of the scale?
The accuracy is 100 g (0.1 kg). For finer measurements, use a laboratory scale.
How to reset to factory settings?
Hold the TARE button for 5 seconds while turning on the device. Release when 'rES' appears.
The scale turns off automatically, how to disable it?
Press the MODE button until 'A.off' flashes. Use the arrows to set to 'OFF' and confirm with MODE.
Where to find the serial number?
The serial number is engraved on the label under the scale or on the side of the housing.
User questions about MCC 250K100NM Kern
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Scale in PDF format for free! Find your manual MCC 250K100NM - Kern and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MCC 250K100NM by Kern.
USER MANUAL MCC 250K100NM Kern
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Kern
Model : MCC 250K100NM
Category : Scale